NAG Parallel Library, Release 2 (MPI-based Version) FDSG602DML - License Managed Silicon Graphics (IRIX 6) Installer's Note Contents 1. Introduction 2. Implementation Provided 2.1. Applicability 2.2. Derivation 3. Distribution Medium 3.1. Recording Details 3.2. Contents 3.3. File Sizes 4. Library Installation 4.1. Installation 4.2. License Management 4.3. Checking Accessibility 4.4. Release to Users 5. Additional Services from NAG 6. Support from NAG 7. NAG Users Association 1. Introduction This document is essential reading for whoever is responsible for the installation of the NAG Parallel Library implementation specified in the title. The installer will be supplied with a printed copy of this document. Both this and the Users' Note are supplied on the distribution medium. Whenever the NAG Parallel Library has been supplied in compiled form, that form is considered to be the standard library file. The use of all supplied software must be in accordance with the terms and conditions of the Software Licence signed by NAG and each site. Any request to use NAG software on a computer other than the one licensed must be referred to NAG (see Section 6). 2. Implementation Provided 2.1. Applicability This implementation is a compiled, tested, ready-to-use version of the NAG Parallel Library that is considered suitable for operation on the computer systems detailed below: hardware: Silicon Graphics MIPS IV operating system: IRIX 6.2 or above Fortran compiler: MIPSpro Fortran 77 v7.x C compiler: The Silicon Graphics ANSI C compiler and run-time libraries must be installed if source is to be recompiled MPI: Silicon Graphics MPI v3.x If a different implementation of MPI is installed, the supplied BLACS library (libnagmpiblacs.a) may have to be rebuilt with different options set in the file Bmake.inc. For information about implementations of the NAG Parallel Library for use on other computer systems please contact NAG. 2.2. Derivation This implementation was produced at NAG Ltd., Oxford on the computing system detailed below: hardware: Silicon Graphics Origin 2000 operating system: IRIX 6.4 Fortran compiler: MIPSpro Fortran 77 v7.1 C compiler: Silicon Graphics ANSI C v7.1 MPI: Silicon Graphics MPI v3.0 The source code of the BLACS was compiled with the -O2 optimization switch. The remaining C code (PBLAS) was compiled with -DAdd_ -O3 and -OPT:Olimit=3107. Apart from f06gbft.f and f08meyt.f (for which -O2 was used), the Fortran code was compiled with -O3. This library has been tested using the Basic Linear Algebra Subprograms (BLAS) and the Basic Linear Algebra Communication Subprograms (BLACS) provided by NAG. Version 1.1 of the BLACS was used in this implementation. 3. Distribution Medium 3.1. Recording Details The implementation is distributed in tar format on CD-ROM, unless otherwise indicated on the medium and accompanying despatch note. For further details, refer to other documentation supplied or contact NAG (see Section 6). 3.2. Contents The following shows the directory/file organization of the materials on the distribution medium. A brief description of some of the files is given. |-- in (Installer's Note) |-- nag_mpi_un.[3z] (Users' Note) |-- contents.ascii (List of Contents) |-- essint.ps (Essential Introduction) |-- future.ps (Future Developments) |-- doc --|-- news.ps (Release 2 News) | |-- reserved.ascii (Reserved Names) | | | | |-- tutorial.ps (Tutorial) | | |-- *.f (Tutorial example | |-- tutorial --| source) | |-- *.dat (Tutorial example | data) | |-- libnagmpi.a |-- libnagmpiz.a (compiled fdsg602dm --|-- libnagpblas.a |-- libnagmpiblacs.a libraries) |-- libnagtools.a | |-- libnagfls.a (support routines library) | | |-- source ---|-- *e.f |-- examples --|-- data -----|-- *e.d | |-- results --|-- *e.r | |-- source ----|-- BLACS --|-- Makefile | |-- Bmake.inc | |-- README | |-- INSTALL --|-- *.c | | |-- *.f | | |-- README | | |-- EXE --|-- Makefile | |-- LIB (empty directory) | |-- SRC -|- README | |- MPI -|- Makefile | |- *.c | |- *.h | |- INTERNAL -|- *.c | |- *.h | |- *.f | | |-- scripts ---|-- * (scripts are provided to set up environment variables and run example programs) 3.3. File Sizes The files require approximately the following disk space: compiled libraries, libnagmpi.a: 2156 kb libnagmpiz.a: 889 kb libnagpblas.a: 1991 kb libnagmpiblacs.a: 1443 kb libnagtools.a: 571 kb libnagfls.a: 1531 kb example program material: 253 kb documentation files: 838 kb licensing materials: 15195 kb BLACS source code: 430 kb (source code not needed on disk permanently) 4. Library Installation 4.1. Installation To install all material use the UNIX tar utility, e.g. tar xvf /cdrom/fd02.tar (assuming the CD-ROM has been mounted as /cdrom). Note: If your machine already has the libraries containing the Parallel BLAS (PBLAS) and the ScaLAPACK tools library then the corresponding NAG versions of these libraries (libnagpblas.a and libnagtools.a) need not be installed. If your machine already has the Basic Linear Algebra Communication Subprograms (BLACS, Version 1.1), then the corresponding NAG version (libnagmpiblacs.a) need not be installed. In this case the MPI version of the BLACS must be used. The object libraries (libnagmpi.a, libnagmpiz.a, libnagpblas.a, libnagmpiblacs.a, libnagtools.a and libnagfls.a) should be moved to a directory, such as /usr/local/lib64, in the default search path of the linker, if possible, so that linkage is convenient. The Users' Note is provided as an nroff source file and also as a packed, pre-formatted file for systems without the Documentor's Work Bench software option. The appropriate file should be moved to a directory in the man search path, e.g. either cd doc ; mv nag_mpi_un.3 /usr/local/man/man3 or cd doc ; mv nag_mpi_un.z /usr/local/man/cat3 4.2. License Management The use of the NAG Parallel Library is controlled by the FLEXlm network license management system (FLEXlm is a registered trademark of Globetrotter Software Inc). This release of the NAG Parallel Library uses version 6.1 of FLEXlm. The remainder of this section describes how a FLEXlm license key should be installed to enable the use of the Library. Further details about FLEXlm and how it may be configured to suit your local circumstances are included in the FLEXlm End User Manual and FAQ supplied in the directory fdsg602dm/license/htmlman. For the NAG Parallel Library you will be provided with an uncounted license key for use on a specific machine. An uncounted license key consists of one FEATURE or INCREMENT line for each product licensed, for example: FEATURE NAG_FD NAG 2.000 31-jul-1999 0 \ CBDA2041DC1BC45D2B68 "SG6M" 80896b27 This enables an unlimited number of instances of version 2 of the application NAG_FD until the date specified on the system with hostid 80896b27 only. Note that the line is continued by escaping the newline character with '\'. You will have to inform NAG of the hostid of the system. To obtain the hostid, locate the FLEXlm utility program 'lmutil' in fdsg602dm/license/bin/sgi32_u6, and run it with argument 'lmhostid'. Once you have obtained the license key, store the text of it in a file, say /usr/local/lib/nag/license.dat The location of this file must be made known to the NAG application by setting the environment variable LM_LICENSE_FILE to the full pathname of the file before the application is invoked. For example, in the C-shell, type: setenv LM_LICENSE_FILE /usr/local/lib/nag/license.dat or in the Bourne shell, type: LM_LICENSE_FILE=/usr/local/lib/nag/license.dat export LM_LICENSE_FILE No other actions are required to install an uncounted license. 4.3. Checking Accessibility The installation may be tested by using the runex script (when logged in as a normal user). The script will copy an example program and its data, compile it, link it with the libraries and run it. Environment variables contained in the file langopts must be modified to reflect the local setup of your machine. For example, give the command runex f04ebfp to run the F04EBFP example program. This will place the results in the subdirectory examples/newresults. Note: Some example programs in D01 Chapter of the Library may produce different results by varying the number of nodes. The parallel algorithms used in D01ATFP, D01AUFP and D01AXFP (routines for evaluation of singular one-dimensional integrals) use a non-deterministic master/slave paradigm. For this reason, you may find that the associated example programs may produce different `error estimates' and `number of function evaluations'. This should not be treated as a problem with these routines as long as the `computed result' is the same and the computed `error estimate' is of the same order in different runs of these example programs. 4.4. Release to Users The supplied Users' Note should be checked and amended as necessary (particularly the section "Accessing the Library"). The Users' Note is provided in man page form in nag_mpi_un.[3z]. The following material should be made accessible to users: compiled libraries: libnagmpi.a libnagmpiz.a libnagpblas.a libnagmpiblacs.a libnagtools.a libnagfls.a example program material: examples/source/*e.f examples/data/*e.d examples/results/*e.r scripts/runex man pages: doc/nag_mpi_un.3 or doc/nag_mpi_un.z documentation: doc/contents.ascii doc/news.ps doc/future.ps doc/reserved.ascii doc/essint.ps doc/tutorial/tutorial.ps tutorial example program material: doc/tutorial/*.f doc/tutorial/*.dat Making the supplied example material directly available to users provides them with easily adaptable templates for their own problems. 5. Additional Services from NAG (a) Documentation Each NAG Parallel Library site is provided with a printed copy of the NAG Parallel Library Manual. Additional manuals are available at prices published in the NAG documentation order form. The NAG Parallel Library is also supported by a Hypertext system at extra cost which allows the user to browse through the Library documentation. Users will be advised of the availability of this system for different platforms as they become available. If you require further information please contact NAG. 6. Support from NAG (a) Contact with NAG Queries concerning this document or the implementation generally should be directed initially to your local Advisory Service. If you have difficulty in making contact locally, you can write to NAG directly, at one of the supplied addresses. Users subscribing to the support service are encouraged to contact one of the NAG Response Centres (see below). (b) NAG Response Centres The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service. The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times. When contacting a Response Centre please quote your NAG user reference and NAG product code. (c) Network Network, NAG's newsletter, is produced periodically and sent free of charge to sites with a supported product or service. (d) NAG Website The NAG Website is an information service providing items of interest to users and prospective users of NAG products and services. The information is regularly updated and reviewed and includes implementation availability, descriptions of products, downloadable software and technical reports. The NAG Website can be accessed at http://www.nag.co.uk/ or http://www.nag.com/ (in the USA) 7. NAG Users Association NAGUA, the NAG Users Association, is a self-financing, non-profitmaking body. It exists to promote communications between NAG and users of its products and services. It provides information to NAG on the requirements of users, who are in turn kept informed of developments in services. Membership is available to any institution or individual holding a licence for any NAG product or service. Members receive discounts on the registration fees at conferences and workshops. For an information pack and membership application form, please contact NAGUA at the supplied address. Appendix - supplied addresses NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: support@nag.co.uk Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 1400 Opus Place, Suite 200 Downers Grove IL 60515-5702 NAG Inc Response Center USA email: infodesk@nag.com Tel: +1 630 971 2337 Tel: +1 630 971 2345 Fax: +1 630 971 2706 Fax: +1 630 971 2346 NAG GmbH Schleissheimerstrasse 5 D-85748 Garching Deutschland email: naggmbh@nag.co.uk Tel: +49 89 3207395 Fax: +49 89 3207396 Nihon NAG KK Nagashima Building 2F 2-24-3 Higashi Shibuya-ku Tokyo Japan email: help@nag-j.co.jp Tel: +81 3 5485 2901 Fax: +81 3 5485 2903 NAG Users Association PO Box 426 OXFORD OX2 8SD United Kingdom email: nagua@nag.co.uk Tel: +44 (0)1865 311102 [NP3295/IN - License Managed