NAG fl90, Release 4

FNW3204DCL - License Managed

Windows NT/2000/XP, Intel Visual Fortran

Users' Note



Contents


1. Introduction

This document is essential reading for every user of the NAG fl90 implementation specified in the title. It provides implementation-specific detail that augments the information provided in the NAG fl90 Manual. Wherever that manual refer to the "Users' Note for your implementation", you should consult this note.

In addition, NAG recommends that before calling any library procrdure you should read the following reference material (see Section 5):

(a) Essential Introduction
(b) Chapter Introduction
(c) Procedure Document
(d) Implementation-specific Users' Note

Items (a), (b) and (c) are included in the NAG fl90 Manual; item (d) is this document which is provided in HTML form.

2. Availability of Procedures

All procedures listed in the chapter contents documents of the NAG fl90 Manual, Release 4 are available in this implementation. At Release 4, 43 new primary ("user-callable") generic procedures have been introduced. Please consult the Release 4 News document in the fl90 Manual for lists of these procedures and for a list of procedures scheduled for withdrawal at future Releases. Your suggestions for new algorithms for future releases of the Library are welcomed (see Section 7).

3. General Information

3.1. Accessing the Library

In this section we assue that the Library has been installed in the default folder:

"c:\Program Files\NAG\FN04\fnw3204dcl\"

If this folder does not exist, please consult with the system manager (or the person who did the installation).

We also assume that the default shortcut for the command prompt is placed in the Start Menu under:

Start|Programs|NAG|FN04|

If this shortcut does not exist, please consult with the system manager (or the person who did the installation).

3.1.1. From a command window

To access this implementation from a command window some environment variables need to be set.

The shortcut:

Start|Programs|NAG|FN04|NAG fl90 Library - Intel Visual Fortran compiler. Command Prompt

may be used to start a command prompt window with the correct settings for the INCLUDE, LIB and PATH environment variables for the Library and the supplied MKL.

If the shortcut is not used, you can set the environment variables by running the batch file envvars.bat for this implementation. The default location of this file is:

"c:\Program Files\NAG\FN04\fnw3204dcl\batch\envvars.bat"

If the file is not in the default location, you can locate it by searching for the file envvars.bat containing fnw3204dcl.

You may compile and link to the NAG fl90 Library on the command line using one of the following commands:

ifort driver.f90 nagfl90_mkl.lib libguide.lib mkl_c.lib
ifort driver.f90 nagfl90_nag.lib
where driver.f90 is your application program.

The first command will use the library without the NAG version of the BLAS/LAPACK procedures nagfl90_mkl.lib with the MKL libraries mkl_c.lib and libguide.lib while the second will use the library with the NAG version of the BLAS/LAPACK procedures nagfl90_nag.lib.

In the case where more than one library is used, you could simplify the command line by using the librarian to combine the libraries into a single library. For example you could use:

lib /out:my_nagfl90_mkl.lib nagfl90_mkl.lib libguide.lib mkl_c.lib
you can then replace the first command with:
ifort driver.f90 my_nagfl90_mkl.lib
Please note that the Intel Visual Fortran compiler environment variables must be set in the command window. For more details refer to the User's Guide for the compiler.

3.1.2. From MS Visual Studio .NET

Once Visual Studio has been opened, it is possible to set up the directories for use with Intel Fortran in this and all subsequent projects which use this compiler. One way to do so is:
  1. Select the Tools pull down menu, move the mouse over Options and left-click on it.
  2. In the Options window, move the mouse over the left window pane to Intel(R) Fortran and left-click on it.
  3. Move the mouse to the right window pane and left-click on the '...' to the right of the Libraries panel.
  4. Add the path to the NAG Library to the Set Directory List window. The default location is:
    "c:\Program Files\NAG\FN04\fnw3204dcl\lib"
  5. If you intend to use the MKL libraries then you need to add the path to the MKL libraries after the path to the NAG Library. The default location is:
    "c:\Program Files\NAG\FN04\fnw3204dcl\MKL_ia32_8.0\lib"
  6. Left-click on the OK button in the Set Directory List window.
  7. Move the mouse to the right window pane and left-click on the '...' to the right of the Includes panel.
  8. Add the path to the NAG module information files to the Set Directory List window. The default location is:
    "c:\Program Files\NAG\FN04\fnw3204dcl\nagfl90_modules"
  9. Left-click on the OK button in the Set Directory List window.
  10. Left-click on the OK button in the Options window.

Whilst the above changes will apply to every Intel Fortran project, the following tasks need to be performed for each individual Intel Fortran project.

The Library is designed to be run in fully optimised mode, so to avoid any warning messages, you might decide to set the active configuration to Release. You can do this from the Toolbar or alternatively via the Build|Configuration Manager menus. If you work in Debug mode, you may receive a warning message about conflicting C runtime libraries. This is usually harmless.

There are a number of ways to add the NAG Library to the project. We describe just two; choose the one that most suits you.

If the Solution Explorer window is open then make sure that group project (the first line) is NOT selected. From the Project menu, choose the project Properties item. (Alternatively right click on a specific single project in the Solution Explorer and choose Properties.)

From the form, click Linker in the leftmost panel and then choose Input. The right hand panel will now have an Additional Dependencies entry, and you need to type nagfl90_mkl.lib libguide.lib mkl_c.lib in this location to use the nagfl90_mkl.lib library and MKL. Please note that the three libraries are separated by a space only. Press the OK button. If you wish to use the self-contained NAG Library then you need to add nagfl90_nag.lib instead.

The Properties information may also be accessed via the Toolbar. With the project selected in Solution Explorer, choose the Properties Window button on the Toolbar. In the ensuing window choose then the rightmost Property Pages icon. As in the paragraph above, from the form click Linker in the leftmost panel and then choose Input. The right hand panel will now have an Additional Dependencies entry, and you need to type the names of the relevant libraries in this location. Press the OK button.

The project should now compile and link using the appropriate choice from the Build menu.

To run a program that does not require input or output redirected from standard input or standard output, from within the Microsoft Development Environment, the program may be executed via the Debug menu (by selecting Start Without Debugging, for example).

If a data file needs to be attached to the standard input or the output of a program needs to be redirected to the standard output, we recommend that you run the executable from a command prompt window to avoid the limitations of the current version of Visual Studio .NET.

3.2. Example Programs

The example programs are most easily accessed by the batch files nagfl90_example.bat or nagfl90_example_mkl.bat.

The batch files need the environment variable NAG_FNW3204DCL.

As mentioned in Section 3.1.1, the installation procedure provides a shortcut which starts a Command Prompt with local environment variables. The environment variables include NAG_FNW3204DCL. This shortcut is placed in the Start Menu under

Start|Programs|NAG|FN04|NAG fl90 Library - Intel Visual Fortran compiler. Command Prompt

If the shortcut is not used, you need to set this environment variable. You can set this environment variable by running the batch file envvars.bat for this implementation. The default location of this file is:

"c:\Program Files\NAG\FN04\fnw3204dcl\batch\envvars.bat"

If the file is not in the default location, you can locate it by searching for the file envvars.bat containing fnw3204dcl.

nagfl90_example_mkl.bat will provide you with a copy of an example program (and its data, if any), compile the program and link it with the library nagfl90_mkl.lib and the MKL. Finally, the executable program will be run. The example program concerned is specified by the argument to nagfl90_example_mkl.bat, e.g.

nagfl90_example_mkl  nag_nlp_ex01
will copy the example program and its data into the files nag_nlp_ex01.f90 and nag_nlp_ex01.dat in the current folder and process them to produce the example program results in the file nag_nlp_ex01.r.

Alternatively you could use:

nagfl90_example  nag_nlp_ex01

The difference between nagfl90_example_mkl.bat and nagfl90_example.bat is that while nagfl90_example_mkl.bat uses the library nagfl90_mkl.lib and the MKL libraries, nagfl90_example.bat uses the self-contained library nagfl90_nag.lib.

The example programs are supplied in machine-readable form. They are suitable for immediate execution. Note that the distributed example programs are those used in this implementation and may not correspond exactly with the programs published in the manual. The distributed example programs should be used in preference wherever possible.

The distributed example results are those obtained with the NAG self-contained library nagfl90_nag.lib, (using the NAG BLAS and LAPACK routines). Running the examples with vendor BLAS or LAPACK may give slightly different results.

4. Procedure-specific Information

Any further information which applies to one or more procedures in this implementation is listed below.

(a) Special Functions

Special functions will give error messages if called with illegal or unsafe arguments. General details are given in the NAG fl90 Manual, but parameter limits which are implementation-specific are given below:
 nag_gamma      error%code  = 201 if x > 1.70E+2
                error%code  = 202 if abs(x) < 2.23E-308
                error%code  = 203 if x < -1.70E+2
 nag_log_gamma  error%code  = 201 if x > 2.55E+305

 nag_erfc       x(hi)  = 2.66E+1
                x(low) = -6.25E+0
 nag_erf        x(hi)  = 6.25E+0

 nag_bessel_y0  error%code  = 201 if x > 1.0E+16
 nag_bessel_y1  error%code  = 202 if x > 1.0E+16
                error%code  = 201 if 0.0 < x <= 2.23E-308
 nag_bessel_y   error%code  = 201 if abs(z) < 3.93E-305
                error%code  = 202 if abs(z) or NU+N-1 > 1.07E+9
                error%code  = 203 if abs(z) or NU+N-1 > 3.27E+4
 nag_bessel_j0  error%code  = 201 if abs(x) > 1.0E+16
 nag_bessel_j1  error%code  = 201 if abs(x) > 1.0E+16
 nag_bessel_j   error%code  = 201 if imag(z) > 7.00E+2
                error%code  = 202 if abs(z) or NU+N-1 > 1.07E+9
                error%code  = 203 if abs(z) or NU+N-1 > 3.27E+4
 nag_bessel_k1  error%code  = 201 if 0.0 < x <= 2.23E-308
 nag_bessel_k   error%code  = 201 if abs(z) < 3.93E-305
                error%code  = 202 if abs(z) or NU+N-1 > 1.07E+9
                error%code  = 203 if abs(z) or NU+N-1 > 3.27E+4
 nag_bessel_i0  error%code  = 201 if abs(x) > 7.116E+2
 nag_bessel_i1  error%code  = 201 if abs(x) > 7.116E+2
 nag_bessel_i   error%code  = 201 if real(z) > 7.00E+2
                error%code  = 202 if abs(z) or NU+N-1 > 1.07E+9
                error%code  = 203 if abs(z) or NU+N-1 > 3.27E+4

 nag_ell_rd     error%code  = 201 if an argument < 1.579E-205
                error%code  = 202 if an argument < 3.774E+202
 nag_ell_rj     error%code  = 201 if an argument < 2.820E-103
                error%code  = 202 if an argument < 1.404E+102

 nag_airy_ai    error%code  = 201 if z is REAL and z > 1.038E+2
                error%code  = 202 if z is REAL and z < -1.8E+9
                error%code  = 203 if abs(z) > 1.02E+3
                error%code  = 204 if abs(z) > 1.04E+6
 nag_airy_bi    error%code  = 201 if z is REAL and z > 1.041E+2
                error%code  = 202 if z is REAL and z < -1.8E+9
                error%code  = 203 if abs(z) > 1.02E+3
                error%code  = 204 if abs(z) > 1.04E+6

 nag_kelvin_ber error%code  = 201 if abs(x) > 49.50     
 nag_kelvin_bei error%code  = 201 if abs(x) > 49.50     
 nag_kelvin_ker error%code  = 201 if x > 9.9726E+2
 nag_kelvin_kei error%code  = 201 if x > 9.9726E+2

5. Documentation

A full online version of the NAG fl90 Library Manual is supplied in the form of Portable Document Format (PDF) files, with an HTML index, in the manual folder (either installed locally or on the distribution CD). The introductory material is also provided as HTML files. By default, these are installed beneath the folder C:\Program Files\NAG\FN04\manual\, and may be accessed using the shortcut Start|Programs|NAG|FN04|NAG fl90 Manual.

A main index file has been provided (manual/html/release4.html) which contains a fully linked contents document pointing to all the available PDF (and where available HTML) files. Use your HTML browser to navigate from here.

In addition the following are provided:

6. Support from NAG

(a) Contact with NAG

Queries concerning this document or the implementation generally should be directed initially to your local Advisory Service. If you have difficulty in making contact locally, you can contact NAG directly at one of the addresses given in the Appendix. Users subscribing to the support service are encouraged to contact one of the NAG Response Centres (see below).

(b) NAG Response Centres

The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.

The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.

When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference and NAG product code (in this case FNW3204DCL).

(c) NAG Websites

The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:

http://www.nag.co.uk/, http://www.nag.com/ or http://www.nag-j.co.jp/

(d) NAG Electronic Newsletter

If you would like to be kept up to date with news from NAG then please register to receive our free electronic newsletter, which will alert you to special offers, announcements about new products or product/service enhancements, customer stories and NAG's event diary. You can register via one of our websites, or by contacting us at nagnews@nag.co.uk.

(e) Product Registration

To ensure that you receive information on updates and other relevant announcements, please register this product with us. For NAG Library products this may be accomplished by filling in the online registration form at http://www.nag.co.uk/numeric/Library_Registration.asp.

7. User Feedback

Many factors influence the way that NAG's products and services evolve, and your ideas are invaluable in helping us to ensure that we meet your needs. If you would like to contribute to this process, we would be delighted to receive your comments. Please contact any of the NAG Response Centres (shown below).

Appendix - Contact Addresses

NAG Ltd
Wilkinson House
Jordan Hill Road
OXFORD  OX2 8DR                         NAG Ltd Response Centre
United Kingdom                          email: support@nag.co.uk

Tel: +44 (0)1865 511245                 Tel: +44 (0)1865 311744
Fax: +44 (0)1865 310139                 Fax: +44 (0)1865 310139

NAG Inc
1431 Opus Place, Suite 220
Downers Grove
IL 60515-1362                           NAG Inc Response Center
USA                                     email: infodesk@nag.com

Tel: +1 630 971 2337                    Tel: +1 630 971 2345
Fax: +1 630 971 2706                    Fax: +1 630 971 2706

Nihon NAG KK
Hatchobori Frontier Building 2F
4-9-9
Hatchobori
Chuo-ku
Tokyo
104-0032
Japan
email: help@nag-j.co.jp

Tel: +81 (0)3 5542 6311
Fax: +81 (0)3 5542 6312