NAG Library Function Document

nag_fft_multid_full (c06pjc)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

nag_fft_multid_full (c06pjc) computes the multidimensional discrete Fourier transform of a multivariate sequence of complex data values.

2
Specification

#include <nag.h>
#include <nagc06.h>
void  nag_fft_multid_full (Nag_TransformDirection direct, Integer ndim, const Integer nd[], Integer n, Complex x[], NagError *fail)

3
Description

nag_fft_multid_full (c06pjc) computes the multidimensional discrete Fourier transform of a multidimensional sequence of complex data values z j1 j2 jm , where j1 = 0 , 1 ,, n1-1 ,   j2 = 0 , 1 ,, n2-1 , and so on. Thus the individual dimensions are n1 , n2 ,, nm , and the total number of data values is n = n1 × n2 ×× nm .
The discrete Fourier transform is here defined (e.g., for m=2 ) by:
z^ k1 , k2 = 1n j1=0 n1-1 j2=0 n2-1 z j1j2 × exp ±2πi j1k1 n1 + j2k2 n2 ,  
where k1 = 0 , 1 ,, n1-1  and k2 = 0 , 1 ,, n2-1 . The plus or minus sign in the argument of the exponential terms in the above definition determine the direction of the transform: a minus sign defines the forward direction and a plus sign defines the backward direction.
The extension to higher dimensions is obvious. (Note the scale factor of 1n  in this definition.)
A call of nag_fft_multid_full (c06pjc) with direct=Nag_ForwardTransform followed by a call with direct=Nag_BackwardTransform will restore the original data.
The data values must be supplied in a one-dimensional array using column-major storage ordering of multidimensional data (i.e., with the first subscript j1  varying most rapidly).
This function uses a variant of the fast Fourier transform (FFT) algorithm (see Brigham (1974)) known as the Stockham self-sorting algorithm, which is described in Temperton (1983).

4
References

Brigham E O (1974) The Fast Fourier Transform Prentice–Hall
Temperton C (1983) Self-sorting mixed-radix fast Fourier transforms J. Comput. Phys. 52 1–23

5
Arguments

1:     direct Nag_TransformDirectionInput
On entry: if the forward transform as defined in Section 3 is to be computed, direct must be set equal to Nag_ForwardTransform.
If the backward transform is to be computed, direct must be set equal to Nag_BackwardTransform.
Constraint: direct=Nag_ForwardTransform or Nag_BackwardTransform.
2:     ndim IntegerInput
On entry: m, the number of dimensions (or variables) in the multivariate data.
Constraint: ndim1.
3:     nd[ndim] const IntegerInput
On entry: the elements of nd must contain the dimensions of the ndim variables; that is, nd[i-1] must contain the dimension of the ith variable.
Constraint: nd[i-1]1, for i=1,2,,ndim.
4:     n IntegerInput
On entry: n, the total number of data values.
Constraint: n must equal the product of the first ndim elements of the array nd.
5:     x[n] ComplexInput/Output
On entry: the complex data values. Data values are stored in x using column-major ordering for storing multidimensional arrays; that is, z j1 j2 jm  is stored in x[ j1 + n1 j2 + n1 n2 j3 + ].
On exit: the corresponding elements of the computed transform.
6:     fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, ndim=value.
Constraint: ndim1.
NE_INT_2
n must equal the product of the dimensions held in array nd: n=value, product of nd elements is value.
On entry nd[I-1]=value and I=value.
Constraint: nd[I-1]1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

Some indication of accuracy can be obtained by performing a subsequent inverse transform and comparing the results with the original sequence (in exact arithmetic they would be identical).

8
Parallelism and Performance

nag_fft_multid_full (c06pjc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_fft_multid_full (c06pjc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

The time taken is approximately proportional to n×logn , but also depends on the factorization of the individual dimensions nd[i-1] . nag_fft_multid_full (c06pjc) is faster if the only prime factors are 2, 3 or 5; and fastest of all if they are powers of 2.

10
Example

This example reads in a bivariate sequence of complex data values and prints the two-dimensional Fourier transform. It then performs an inverse transform and prints the sequence so obtained, which may be compared to the original data values.

10.1
Program Text

Program Text (c06pjce.c)

10.2
Program Data

Program Data (c06pjce.d)

10.3
Program Results

Program Results (c06pjce.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017