NAG Library Routine Document

f12fcf  (real_symm_proc)

Note: this routine uses optional parameters to define choices in the problem specification. If you wish to use default settings for all of the optional parameters, then the option setting routine f12fdf need not be called. If, however, you wish to reset some or all of the settings please refer to Section 11 in f12fdf for a detailed description of the specification of the optional parameters.

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

f12fcf is a post-processing routine in a suite of routines which includes f12faf, f12fbf, f12fdf and f12fef. f12fcf must be called following a final exit from f12fbf.

2
Specification

Fortran Interface
Subroutine f12fcf ( nconv, d, z, ldz, sigma, resid, v, ldv, comm, icomm, ifail)
Integer, Intent (In):: ldz, ldv
Integer, Intent (Inout):: icomm(*), ifail
Integer, Intent (Out):: nconv
Real (Kind=nag_wp), Intent (In):: sigma, resid(*)
Real (Kind=nag_wp), Intent (Inout):: d(*), z(ldz,*), v(ldv,*), comm(*)
C Header Interface
#include nagmk26.h
void  f12fcf_ ( Integer *nconv, double d[], double z[], const Integer *ldz, const double *sigma, const double resid[], double v[], const Integer *ldv, double comm[], Integer icomm[], Integer *ifail)

3
Description

The suite of routines is designed to calculate some of the eigenvalues, λ , (and optionally the corresponding eigenvectors, x ) of a standard eigenvalue problem Ax = λx , or of a generalized eigenvalue problem Ax = λBx  of order n , where n  is large and the coefficient matrices A  and B  are sparse, real and symmetric. The suite can also be used to find selected eigenvalues/eigenvectors of smaller scale dense, real and symmetric problems.
Following a call to f12fbf, f12fcf returns the converged approximations to eigenvalues and (optionally) the corresponding approximate eigenvectors and/or an orthonormal basis for the associated approximate invariant subspace. The eigenvalues (and eigenvectors) are selected from those of a standard or generalized eigenvalue problem defined by real symmetric matrices. There is negligible additional cost to obtain eigenvectors; an orthonormal basis is always computed, but there is an additional storage cost if both are requested.
f12fcf is based on the routine dseupd from the ARPACK package, which uses the Implicitly Restarted Lanczos iteration method. The method is described in Lehoucq and Sorensen (1996) and Lehoucq (2001) while its use within the ARPACK software is described in great detail in Lehoucq et al. (1998). An evaluation of software for computing eigenvalues of sparse symmetric matrices is provided in Lehoucq and Scott (1996). This suite of routines offers the same functionality as the ARPACK software for real symmetric problems, but the interface design is quite different in order to make the option setting clearer and to simplify some of the interfaces.
f12fcf, is a post-processing routine that must be called following a successful final exit from f12fbf. f12fcf uses data returned from f12fbf and options, set either by default or explicitly by calling f12fdf, to return the converged approximations to selected eigenvalues and (optionally):
the corresponding approximate eigenvectors;
an orthonormal basis for the associated approximate invariant subspace;
both.

4
References

Lehoucq R B (2001) Implicitly restarted Arnoldi methods and subspace iteration SIAM Journal on Matrix Analysis and Applications 23 551–562
Lehoucq R B and Scott J A (1996) An evaluation of software for computing eigenvalues of sparse nonsymmetric matrices Preprint MCS-P547-1195 Argonne National Laboratory
Lehoucq R B and Sorensen D C (1996) Deflation techniques for an implicitly restarted Arnoldi iteration SIAM Journal on Matrix Analysis and Applications 17 789–821
Lehoucq R B, Sorensen D C and Yang C (1998) ARPACK Users' Guide: Solution of Large-scale Eigenvalue Problems with Implicitly Restarted Arnoldi Methods SIAM, Philidelphia

5
Arguments

1:     nconv – IntegerOutput
On exit: the number of converged eigenvalues as found by f12fbf.
2:     d* – Real (Kind=nag_wp) arrayOutput
Note: the dimension of the array d must be at least ncv (see f12faf).
On exit: the first nconv locations of the array d contain the converged approximate eigenvalues.
3:     zldz* – Real (Kind=nag_wp) arrayOutput
Note: the second dimension of the array z must be at least ncv  if the default option Vectors=RITZ has been selected and at least 1 if the option Vectors=NONE or SCHUR has been selected (see f12faf).
On exit: if the default option Vectors=RITZ (see f12fdf) has been selected then z contains the final set of eigenvectors corresponding to the eigenvalues held in d. The real eigenvector associated with an eigenvalue is stored in the corresponding column of z.
4:     ldz – IntegerInput
On entry: the first dimension of the array z as declared in the (sub)program from which f12fcf is called.
Constraints:
  • if the default option Vectors=Ritz has been selected, ldzn;
  • if the option Vectors=None or Schur has been selected, ldz1.
5:     sigma – Real (Kind=nag_wp)Input
On entry: if one of the Shifted Inverse (see f12fdf) modes has been selected then sigma contains the real shift used; otherwise sigma is not referenced.
6:     resid* – Real (Kind=nag_wp) arrayInput
Note: the dimension of the array resid must be at least n (see f12faf).
On entry: must not be modified following a call to f12fbf since it contains data required by f12fcf.
7:     vldv* – Real (Kind=nag_wp) arrayInput/Output
Note: the second dimension of the array v must be at least max1,ncv  (see f12faf).
On entry: the ncv columns of v contain the Lanczos basis vectors for OP as constructed by f12fbf.
On exit: if the option Vectors=SCHUR has been set, or the option Vectors=RITZ has been set and a separate array z has been passed (i.e., z does not equal v), then the first nconv columns of v will contain approximate Schur vectors that span the desired invariant subspace.
8:     ldv – IntegerInput
On entry: the first dimension of the array v as declared in the (sub)program from which f12fcf is called.
Constraint: ldvn.
9:     comm* – Real (Kind=nag_wp) arrayCommunication Array
Note: the dimension of the array comm must be at least max1,lcomm (see f12faf).
On initial entry: must remain unchanged from the prior call to f12faf.
On exit: contains data on the current state of the solution.
10:   icomm* – Integer arrayCommunication Array
Note: the dimension of the array icomm must be at least max1,licomm (see f12faf).
On initial entry: must remain unchanged from the prior call to f12faf.
On exit: contains data on the current state of the solution.
11:   ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, ldz < max1,n  or ldz < 1  when no vectors are required.
ifail=2
On entry, the option Vectors = Select  was selected, but this is not yet implemented.
ifail=3
The number of eigenvalues found to sufficient accuracy prior to calling f12fcf, as communicated through the argument icomm, is zero.
ifail=4
The number of converged eigenvalues as calculated by f12fbf differ from the value passed to it through the argument icomm.
ifail=5
Unexpected error during calculation of a tridiagonal form: there was a failure to compute all the converged eigenvalues. Please contact NAG.
ifail=8
Either the routine was called out of sequence (following an initial call to the setup routine and following completion of calls to the reverse communication routine) or the communication arrays have become corrupted.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

The relative accuracy of a Ritz value, λ , is considered acceptable if its Ritz estimate Tolerance × λ . The default Tolerance used is the machine precision given by x02ajf.

8
Parallelism and Performance

f12fcf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
f12fcf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

None.

10
Example

This example solves Ax = λBx  in regular mode, where A  and B  are obtained from the standard central difference discretization of the one-dimensional Laplacian operator d2u dx2  on 0,1 , with zero Dirichlet boundary conditions.

10.1
Program Text

Program Text (f12fcfe.f90)

10.2
Program Data

Program Data (f12fcfe.d)

10.3
Program Results

Program Results (f12fcfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017