1 Architecture

1 Architecture

Multi-User Architecture

Figure 1-1 Multi-User Architecture

1.1 Multi-User Architecture

IRIS Explorer uses version 2.0 of the multi-user COVISA collaborative architecture. The elements of this architecture are as follows (see Figure 1-1):

  • Collaboratively aware modules (CAMs): these modules embody the essential links between the pipelines. When a participant launches a CAM it causes a corresponding CAM to be launched automatically in the collaborators' environments; they can connect this CAM into their pipeline as they wish. There is a direct communication channel between each CAM and the central server. As a minimum, CAM modules must be provided which allow data and parameter sharing between pipelines, one for each datatype supported in the environment.

  • Advisor module: this module records the selection of a module, or set of modules, from a pipeline on the local machine. It then generates the appropriate scripting commands to duplicate this pipeline fragment and sends these commands via the central server to the other participants.

  • Local server: this requests entry to a collaborative session and manages the involvement of a participant in it, via a link to the central server. This local server launches appropriate modules, wires up connections and sets module parameters at the request of the central server.

  • Central server: this element manages the collaboration and has 3 main components:

    • Participant list: this keeps a record of multiple participants in the session, dynamically adding and deleting them as they join and leave.

    • Control data route: this route passes control messages about new module launches to local servers. It also acts as the communication channel for any connected advisor modules.

    • Group data routes: these routes are initiated by the connection of new CAMs and distribute data from one group member to all others. The group ID is common to all group members and acts as a unique identifier for the end points of the data route. These unique identifiers also facilitate the construction of end-user collaborative applications by guaranteeing automatic connection of their multiple constituent CAMs.

1.2 Multi-User Implementation

1.2.1 Overview

The COVISA architecture includes a suite of modules for facilitating collaborative working within the framework of IRIS Explorer. The local server has been implemented as a module along with an Advisor module and the collaboratively aware modules for each of the internal datatypes. These behave like any other IRIS Explorer module: their names are listed in the Librarian window and they are launched into the Map Editor and connected to other modules exactly as normal. There is no need to learn any additional skills: the transition from single user to multi-user environment is seamless.

A collaborative session begins when one party launches a local server module and enters the connection details of the central server. Any collaboratively aware modules subsequently launched use information set by their local server to find and connect to the central server by means of a socket. The act of connection initiates a unique data route within the server and causes the automatic launch of corresponding modules in the other connected sessions. The architecture is designed to allow participants to join and leave during the lifetime of the session; if a party connects to an already running session then the central server automatically sends commands to the new local server enabling the new party to catch up on the current set of CAMs.

Once a CAM is connected to a data route, any data passed into it from the local session is forwarded to the central server which then distributes this data to all other group members. A group is defined as a set of identical collaboratively aware modules, one in each of the collaborators' environments, which are sharing a specific data object. Participants can identify shared data by means of the unique group ID attached to each module which is consistent between all participants. In addition to being able to join and leave a session in progress, participants may disconnect individual modules from the group to allow periods of independent work on a subset of the pipeline while remaining in contact with the rest of the session. Disconnected modules can be re-connected subsequently to their group and the results shared once more.

1.2.2 Central Server

The central server (often referred to as the COVISA Server in other parts of this documentation) is the hub of the collaborative session and is set running on a machine accessible to all participants on a known port number. It accepts connections from local servers, adding their connection details to the list of current participants, and issues a unique server ID. If required the central server creates and sends the appropriate Skm commands to the new local server to initiate the launch of CAMs corresponding to the current shared set.

In addition to maintaining the list of participants the central server is also responsible for maintaining a list of current groups and distributing data between group members. The server distinguishes the sending module by means of its local server ID and then duplicates and distributes the incoming data object to all other group members. Group members are held in a list and should two group members send data at the same time the central server propagates the data from the first member in the list and disposes of data from the second. This is done to prevent groups getting out of synchronisation. When the number of group members falls to zero the central server deletes the group from the list.

1.2.3 Local Server

Local Server Module

Figure 1-2 Local Server Module

The job of the local server is twofold; to establish the collaborative session by connecting to the central server, subsequently providing CAMs with this connection information; and to provide a channel for the central server to issue Skm commands to either launch new CAMs or establish pipeline fragments as directed by an Advisor module (see Section 1.2.4). Once launched the user enters the machine name and port number of the central server and then hits the Start button (the IRIS Explorer environment defines suitable defaults which are used by the module when it is started up). The local server can connect to the central server in one of two modes:

  • on-the-fly is used in dynamic pipeline construction with the Map Editor where launching a CAM causes corresponding CAM launches in other collaborators' environments

  • end-user is used for shrink wrapped collaborative applications where a CAM launch does not initiate a corresponding CAM launch in any other session (see Chapter 5, "End User Applications".

1.2.4 Advisor Module

Advisor Module

Figure 1-3 Advisor Module

The Advisor module is used to allow one collaborator to aid another in helpdesk or educational situations when one user has more visualization experience than the other. The user with the Advisor module is able to initiate a whole pipeline or fragments of one, setting all of the parameters and making all of the wiring connections, in the other user's environment. When an Advisor module connects to the central server it is similar to a local server in that it does not cause the creation of corresponding Advisor modules in the other participants' environments. All Skm commands generated by the Advisor module are passed to the collaborators' local servers which in turn pass them into the environment where they are processed. The user acting as the advisor selects modules to send by highlighting them in his or her own environment and then chooses one of the following actions:

  • copy the parameter set from the selected modules

  • copy both the wiring connections and parameter set

  • recreate the entire piece of pipeline in the collaborators' environments

Additionally, specific Skm commands can be entered into the Advisor module to be executed in the collaborators' environments. This allows the advisor greater flexibility in controlling the collaborator's environment than is allowed by a pre-defined set of commands and is likely to be required in the helpdesk scenario.

1.2.5 Collaboratively Aware Modules

Share Module in Disconnected and Connected State

Figure 1-4 Share Module in Disconnected and Connected State

A set of collaboratively aware modules is provided for each of the internal datatypes. When a CAM is launched it first collects connection information from the local server giving the location of the central server, and then waits for the instruction to connect. If this instruction comes by means of the user pressing the Initiate button (see Figure 1-4), it connects to the central server in initiate mode. This mode causes the central server to create a new group, returning the group ID to the module. If the module has been automatically launched by the central server then Skm is used to make it connect in join mode. This connection mode does not cause the creation of a new group but adds this module to the requested group. Once connected to a group a user can disconnect and re-connect the module by means of a toggle, re-connection being achieved using the join mode.

Website Feedback

If you would like a response from NAG please provide your e-mail address below.

(If you're a human, don't change the following field)
Your first name.
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Enter the characters shown in the image.