Kusari Installation Guide (Unix) Release 2.2
This document is for system administrators. It describes the installation process of the Kusari Licence Management System.
2.1 The NAG_KUSARI_FILE variable
Kusari looks for licence information based on the NAG_KUSARI_FILE environment variable.
This variable may contain a file name (path), a licence server specification, or a comma-separated list of file names and licence servers.
File names are for licence files containing keys for trial licences and machine-local (node) licences.
2.2 The khostid program
The khostid program produces the machine identification string.
This is needed for machine-local licences (node licences and perpetual licences); it must be run on the machine for which the licence is intended.
2.3 Licence server communications
In this release, the licence server will refuse to communicate with a machine on the other side of a NAT (network address translating) router. The testserver and testclient programs may be used to check that communication to a licence server can be successfully established.
The distributed Kusari licence server package contains the following subdirectories:
- The executable files: khostid, klcheck, kldctl, naglmd, testclient and testserver. We recommend that these be installed into the directory /etc/NAG.
- The documentation; this includes the Installation Guide in both PDF and HTML (k-install.pdf and k-install.html) and the User Guide in both PDF and HTML (k-using.pdf and k-using.html). It may also contain system-specific installation instructions in a file named install-systemname.txt; if this exists it will be a plain text file which should be read together with this Installation Guide.
- This subdirectory, if it exists, contains other system-specific files to help with Kusari installation and operation. They will be described in the system-specific installation guide in the doc/ subdirectory.
The recommended installation procedure for a site licence, where no Kusari licence server is currently being run, is as follows:
- Test the local network to ensure that licence server operation is possible, using the testserver and testclient programs.
- Use the khostid program on the server machine and send its identification string to NAG.
- When you receive the licence key(s) from NAG, save them to the server control file.
- Start the naglmd licence server on the server machine.
- Update the server machine's boot or startup scripts so that naglmd will be run automatically.
If the server machine is already running naglmd, the procedure is simpler:
- There is no need to test the local network, since it is already known to be working acceptably.
- Use the khostid program on the server machine and send its identification string to NAG.
- When you receive the licence key(s) from NAG, append them to the server control file.
- Stop and restart the naglmd licence server.
5.1 The testserver program
The testserver program should be run on the server machine. If it starts successfully, it will produce the message
If the server cannot start, it will produce an error message. The most likely error messages are either
?Port number conflict: TCP port 7733 is already in use
?Port number conflict: UDP port 7733 is already in use
These indicate that the default Kusari communication port number is already in use by another application on the server machine, and that another port number should be chosen. The procedure described below ("Choosing different port numbers") should be followed.
Once the testserver program is running successfully, the testclient program should be used to test communications. An initial test should be to run the testclient on the server machine; if the default port numbers are being used, simply run testclient with no arguments.
The testserver program will produce informative messages when testclient is run, if communications can be established. A message is produced for each of the TCP and UDP tests; for a completely successful test it will display
TCP message test seems ok - reporting to testclient UDP test passed ok - reporting to testclient
If the TCP test passes but the UDP test fails, the second line will instead be
UDP test ****** FAILED ******
5.2 The testclient program
The testclient tests the communication between a client machine (one that will be running the software product) and the licence server machine. First, the testserver program should be running on the licence server machine. Then, the testclient program should be run. Its command line is:
The server-spec takes the same form as in the NAG_KUSARI_FILE variable, i.e. the server machine name followed by a colon, optionally followed by the port number. If no server-spec is present, it is treated as localhost:.
If the testclient program cannot connect to the testserver program, it will produce the message:
?Test FAILED - cannot connect to server (Perhaps it is not running, or on a different machine?)
You should check that you have specified the right machine name, and that either you are using the default port numbers or have specified the same port number for testclient as you did for testserver.
If both the TCP and UDP tests pass, testclient will display
TCP message test passed ok. UDP message test passed ok.
If the UDP test fails, the second line will be replaced by
UDP message test ****** FAILED ******
If your site has multiple sub-nets, the testclient program should be run on a machine in each sub-net to confirm that it will work.
If you cannot get the testserver and testclient programs to communicate successfully, you should contact NAG with the exact messages that were produced.
5.3 Choosing different port numbers
Decide which port number to test; you should avoid any port number that is already in use or which may be in use; see the list maintained by the Internet Assigned Numbers Authority for guidance: this may be found at http://www.iana.org/assignments/port-numbers.
The procedure specified above for using testserver and testclient should be followed, but with the port number specified. For testserver, use the -port option; for example, to test port 7734, do
testserver -port 7734
For testclient program, specify the port number as part of the server name; for example, to communicate with the server on port 7734 on the local host do
6.1 Server licence key lines
6.1.1 Uncounted Licences
An uncounted licence authorises the licence server to allow any number of concurrent uses of the software.
6.1.2 Floating Licences
A floating licence authorises the licence server to permit up to a specified number of concurrent users of the software.
One licence is required for each combination of user id and machine for which concurrent use is required; for example, two different users on the same machine will require two licences, as will the same user on two different machines. However, only one licence is required for multiple uses by the same user on a single machine.
By default, products will queue for a licence if all the licences are currently checked out. An informative message may be produced (depending on the software product) when this happens.
6.2 The LOG line
The LOG line specifies the log file for naglmd. It begins with the LOG keyword, which is followed by a blank and then the filename. If the naglmd command line contains the -log option, the LOG line will be ignored.
If no LOG line is present, and the -log option is not used, naglmd will log any errors and information messages (such as licence requests) using the syslog facility. Errors will be logged with level LOG_ERR, warnings with LOG_WARNING, and information messages with LOG_INFO. Whether and how syslogd records these messages is governed by its own configuration: see the man pages on syslog, syslog.conf and syslogd for further information.
6.3 The PORT line
The PORT line specifies which TCP and UDP port numbers are used by naglmd for communication. This line is only very rarely needed, when there is a conflict between the default port numbers used by naglmd and another application running on the server machine. It begins with the PORT keyword, which is followed by a blank and then the TCP port number (this number must lie between 1025 and 49151). If the UDP port number differs from the TCP port number, it should be specified on the same line; it is separated from the TCP port number by a comma, and consists of the letter 'U' followed by a number between 1025 and 49151.
6.5 A sample server file
! This is where we want the log file to be written. ! LOG /var/log/naglmd.log ! We have a site licence for the NAG Fortran Library (Mark 26) on Linux, ! using the NAG Fortran Compiler. ! FLL6I26D9 SITE 2018/12/31 "AidmYczVlY+hF9c1qhDydOja" ! We have 10 floating licences for the NAG Fortran Compiler on Linux: ! NPL6A62NA FLOATING=10 2018/12/31 "vKmOEjxwkeVjcjjkJgGuoW0k" ! And that's all folks.
Each naglmd licence server can only be run on its specified server machine, and the server machine can only run one naglmd server at a time. When run, it reads its server control file (by default this is located in /etc/NAG/naglmd.ctl).
If no errors are detected in the options or the control file, it will then detach from the controlling terminal and run in the background as a daemon; this will return you to the shell command prompt. No output is produced if the startup is successful; any errors encountered after startup will be written to the log file or reported to syslog.
The process id of the naglmd daemon is stored in /tmp/naglmd.pid.
naglmd normally logs all licence requests (whether granted or not), and any errors that might occur.
7.1 User id
naglmd need not be run under the root user id; it will run successfully as long as it can read its control file and write messages to its log file. (However, it is safe to run naglmd as root because it only reads from its own control file and writes to its own log file.)
- -file slfile
- Read the server control file slfile instead of /etc/NAG/naglmd.ctl.
- Display brief help message listing the possible options for naglmd.
- -log logfile
- Write log messages to logfile. Errors attempting to write to the log file will be reported to syslog. This option overrides any LOG line in the server control file.
- Run the licence server directly on the controlling terminal, do not detach and run as a daemon.
- Do not write information about licence requests to the log file, only error and status messages.
- -port number
- Use TCP port number instead of 7733. This option is overriden by any PORT line in the server control file.
- -uport number
- Use UDP port number instead of 7733. This option is overriden by any PORT line in the server control file.
- If this option is supplied as the only option to naglmd it will display version information consisting of the Kusari Release numbers, and then exit. It cannot be supplied at the same time as any other option.
7.3 Automatic startup
It is recommended that naglmd be started automatically on the server machine. This can typically be achieved by adding its startup command to a system initialisation file such as /etc/rc.local (details vary depending on which version of Unix is being used). If the server control file is in the default location (/etc/NAG/naglmd.ctl), and contains a suitable LOG line, e.g.
then the startup command can be as simple as
The klcheck program takes a single argument which is a NAG product code. It then attempts to check out that product and reports whether it was successful, and if successful the type of licence it obtained and from where.
The kldctl program is provided for controlling naglmd. It takes a command as its first argument. The PLIST command lists the product which are controlled by a particular naglmd. The PINFO command has a product code argument, and lists the details for that product on naglmd. The REREAD command causes naglmd to reread its control file. Finally, the STOP command shuts naglmd down.
The PLIST and PINFO commands can be used anywhere by anyone, but the STOP command can only be used on the machine running naglmd, and only by the same user.
The optional second argument is a licence server specification, as defined above, which only needs to be provided for a remote server or a non-default port number on a local server.
Further system-specific installation information may be available; see the appropriate document (e.g. for FreeBSD 5.x, see install-FreeBSD5.txt).