Your attention is drawn to the terms and conditions of the Software License Agreement (in file lic_agr.txt, see Section 3.1) regarding the use of NAG software. Requests for information about the availability of other implementations must be referred to NAG.
This implementation is a compiled, tested, ready-to-use version of the NAG C Library that is considered suitable for operation on the computer systems detailed below:
hardware: x86_64 systems operating system: Linux 126.96.36.199-170.2.117.fc10.x86_64
(GNU C Library stable release version 2.9) and compatible C compiler: Intel C Compiler
version 188.8.131.52 and compatible OpenMP runtime: Intel OpenMP Library, libiomp5 and compatible vendor library: Intel MKL version 11.3.3 and compatible
The definitions and sizes of the Integer and Pointer types used in this implementation are shown in Section 3.3 of the Users' Note.
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: Intel(R) Xeon(R) E5405 operating system: Linux 184.108.40.206-170.2.117.fc10.x86_64The flags listed above were chosen to be conservative in terms of performance optimization to prioritize consistency of numerical results. However key computational kernels in the NAG Library have been compiled and tested with higher levels of optimization.
with GNU C Library stable release version 2.9
(Fedora release 10 (Cambridge)) C compiler: Intel C Compiler
version 220.127.116.11 20160415 OpenMP runtime: Intel OpenMP Library, libiomp5 vendor library: Intel MKL version 11.3.3 compiler options: -O3 -axCORE-AVX2,AVX,SSE2 -no-fma -fp-model precise -fPIC \ -m64 -fexceptions -qopenmp
For details of any other systems on which this implementation has been tested, please see the Supplementary Information page on our website.
Please see the Intel website for further information about MKL (https://software.intel.com/intel-mkl).
Please check the following URL:
for details of any new information related to the applicability or usage of this implementation. Details of any other systems on which it has been tested may also be found on this page.
|- in.html (Installer's Note - this document) |- doc -|- un.html (Users' Note) | |- lic_agr.txt (license agreement) | | |- libnagc_nag.a (static self-contained library | | including NAG BLAS/LAPACK) | |- libnagc_nag.so.26 (shareable self-contained library | | including NAG BLAS/LAPACK) | |- libnagc_nag.so (symbolic link pointing at |- lib -| libnagc_nag.so.26) | |- libnagc_mkl.a (static library requiring | | MKL BLAS/LAPACK) | |- libnagc_mkl.so.26 (shareable library requiring | | MKL BLAS/LAPACK) | |- libnagc_mkl.so (symbolic link pointing at | libnagc_mkl.so.26) csl6i26ddl -| |- include -|- *.h | | |- source --|- ??????e.c | | |- examples -|- data ----|- ??????e.d | | |- ??????e.opt | | | |- results -|- ??????e.r | |- scripts -|- nagc_example* (scripts to compile and run | NAG example programs) | |- mkl_intel64_11.3.3 -|- * (Intel Math Kernel Library) | |- rtl -|- * (Intel compiler run-time libraries) | | |- bin -|- * (directories of license management | | binaries for supported platforms) |- license -|- README.txt | |- doc -|- * (license management documentation)
The following shows the directory and file organization of the Library Manual materials after installation.
Details of the software are given in the Users' Note (un.html).
Assuming you have downloaded the Library materials from our website as a tar gzip file (csl6i26ddl.tgz), cd to the directory where the file is located and extract the installation materials using the following command:
tar xvzf csl6i26ddl.tgzThis will extract the files install.sh, cs26.tgz, lic_agr.txt, in.html and un.html.
If you have downloaded the Library Manual as a tar gzip file (cl26_doc.tgz) run the command
gunzip cl26_doc.tgzto extract the file cl26_doc.tar into the same location as the Library materials. You can then install the materials from the download directory by executing the shell script install.sh in a command window as:
./install.shBy default, the materials will be installed under $HOME/NAG/, or if the directory $HOME does not exist, under /opt/NAG/. However, you may choose a different location. In this document we refer to the directory $HOME/NAG/csl6i26ddl or /opt/NAG/csl6i26ddl as [INSTALL_DIR]. This convention is also used in the Users' Note.
The install script can install the Library Manual in the
same location as the NAG Library material or at some other location of
Alternatively, the Library Manual may be viewed from the NAG website
In order to enable the software, NAG will issue you with a license key. The license key is contained in a text file consisting of details of the software that will be enabled. For evaluation purposes a trial license may be used. Before obtaining a full license you need to know the Kusari hostid of the system on which you intend to use this product. How to do this is described below.
To request a license key, run the program khostid located in the license/bin/linux_x64 subdirectory of the software distribution. This utility must be run from a command prompt. Return the information that it displays, together with the product code (in this case CSL6I26DDL), by email to NAG. Alternatively, direct the output from this utility to a file and send both the file and the product code to NAG.
A short term (demonstration or trial) license key contains one or more lines like the following:
CSL6I26DD TRIAL 2016/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL. Longer term license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys typically include the word NODE or FULL instead of the word TRIAL above and may contain extra fields.
Once you have obtained one of the above license keys, the easiest way to install it is to store the text in a file,
/usr/local/NAG/nag.keyThe license software in this implementation automatically looks for these particular files and reads the first one found, so no other action is necessary. Alternatively, store the license in a file with a name and location of your choice, say,
[INSTALL_DIR]/license.lic.The location of the license file, if it is not one of the default places listed above, must be made known to the NAG application by setting the environment variable NAG_KUSARI_FILE to the full pathname of the file before the application is invoked.
For example, in the C shell, type:
setenv NAG_KUSARI_FILE [INSTALL_DIR]/license.licor in the Bourne shell, type:
NAG_KUSARI_FILE=[INSTALL_DIR]/license.lic export NAG_KUSARI_FILE
Further details about Kusari and how it may be configured to suit your local circumstances (e.g. how to install the license key on a server) are included in the Kusari License Management documentation in the license/doc/ subdirectory of the software distribution. See also the Kusari FAQ: http://www.nag.co.uk/content/kusari-frequently-asked-questions.
for information about the NAG Technical Support Service, including details of the NAG Technical Support Service contact points. We would also be delighted to receive your feedback on NAG's products and services.
for worldwide contact details for the Numerical Algorithms Group.