NAG Library Function Document
nag_tsa_multi_part_lag_corr (g13dnc)
1 Purpose
nag_tsa_multi_part_lag_corr (g13dnc) calculates the sample partial lag correlation matrices of a multivariate time series. A set of
${\chi}^{2}$statistics and their significance levels are also returned. A call to
nag_tsa_multi_cross_corr (g13dmc) is usually made prior to calling this function in order to calculate the sample crosscorrelation matrices.
2 Specification
#include <nag.h> 
#include <nagg13.h> 
void 
nag_tsa_multi_part_lag_corr (Integer k,
Integer n,
Integer m,
const double r0[],
const double r[],
Integer *maxlag,
double parlag[],
double x[],
double pvalue[],
NagError *fail) 

3 Description
Let
${W}_{\mathit{t}}={\left({w}_{1\mathit{t}},{w}_{2\mathit{t}},\dots ,{w}_{\mathit{k}\mathit{t}}\right)}^{\mathrm{T}}$, for
$\mathit{t}=1,2,\dots ,n$, denote
$n$ observations of a vector of
$k$ time series. The partial lag correlation matrix at lag
$l$,
$P\left(l\right)$, is defined to be the correlation matrix between
${W}_{t}$ and
${W}_{t+l}$, after removing the linear dependence on each of the intervening vectors
${W}_{t+1},{W}_{t+2},\dots ,{W}_{t+l1}$. It is the correlation matrix between the residual vectors resulting from the regression of
${W}_{t+l}$ on the carriers
${W}_{t+l1},\dots ,{W}_{t+1}$ and the regression of
${W}_{t}$ on the same set of carriers; see
Heyse and Wei (1985).
$P\left(l\right)$ has the following properties.
(i) 
If ${W}_{t}$ follows a vector autoregressive model of order $p$, then $P\left(l\right)=0$ for $l>p$; 
(ii) 
When $k=1$, $P\left(l\right)$ reduces to the univariate partial autocorrelation at lag $l$; 
(iii) 
Each element of $P\left(l\right)$ is a properly normalized correlation coefficient; 
(iv) 
When $l=1$, $P\left(l\right)$ is equal to the crosscorrelation matrix at lag $1$ (a natural property which also holds for the univariate partial autocorrelation function). 
Sample estimates of the partial lag correlation matrices may be obtained using the recursive algorithm described in
Wei (1990). They are calculated up to lag
$m$, which is usually taken to be at most
$n/4$. Only the sample crosscorrelation matrices (
$\hat{R}\left(\mathit{l}\right)$, for
$\mathit{l}=0,1,\dots ,m$) and the standard deviations of the series are required as input to nag_tsa_multi_part_lag_corr (g13dnc). These may be computed by
nag_tsa_multi_cross_corr (g13dmc). Under the hypothesis that
${W}_{t}$ follows an autoregressive model of order
$s1$, the elements of the sample partial lag matrix
$\hat{P}\left(s\right)$, denoted by
${\hat{P}}_{ij}\left(s\right)$, are asymptotically Normally distributed with mean zero and variance
$1/n$. In addition the statistic
has an asymptotic
${\chi}^{2}$distribution with
${k}^{2}$ degrees of freedom. These quantities,
$X\left(l\right)$, are useful as a diagnostic aid for determining whether the series follows an autoregressive model and, if so, of what order.
4 References
Heyse J F and Wei W W S (1985) The partial lag autocorrelation function Technical Report No. 32 Department of Statistics, Temple University, Philadelphia
Wei W W S (1990) Time Series Analysis: Univariate and Multivariate Methods Addison–Wesley
5 Arguments
 1:
$\mathbf{k}$ – IntegerInput

On entry: $k$, the dimension of the multivariate time series.
Constraint:
${\mathbf{k}}\ge 1$.
 2:
$\mathbf{n}$ – IntegerInput

On entry: $n$, the number of observations in each series.
Constraint:
${\mathbf{n}}\ge 2$.
 3:
$\mathbf{m}$ – IntegerInput

On entry:
$m$, the number of partial lag correlation matrices to be computed. Note this also specifies the number of sample crosscorrelation matrices that must be contained in the array
r.
Constraint:
$1\le {\mathbf{m}}<{\mathbf{n}}$.
 4:
$\mathbf{r0}\left[{\mathbf{k}}\times {\mathbf{k}}\right]$ – const doubleInput

On entry: the sample crosscorrelations at lag zero/standard deviations as provided by
nag_tsa_multi_cross_corr (g13dmc), that is,
${\mathbf{r0}}\left[\left(\mathit{j}1\right)k+\mathit{i}1\right]$ must contain the
$\left(\mathit{i},\mathit{j}\right)$th element of the sample crosscorrelation matrix at lag zero if
$\mathit{i}\ne \mathit{j}$ and the standard deviation of
$\mathit{i}=\mathit{j}$, for
$\mathit{i}=1,2,\dots ,k$ and
$\mathit{j}=1,2,\dots ,k$.
 5:
$\mathbf{r}\left[{\mathbf{k}}\times {\mathbf{k}}\times {\mathbf{m}}\right]$ – const doubleInput

On entry: the sample crosscorrelations as provided by
nag_tsa_multi_cross_corr (g13dmc), that is,
${\mathbf{r}}\left[\left(\mathit{l}1\right){k}^{2}+\left(\mathit{j}1\right)k+\mathit{i}1\right]$ must contain the
$\left(\mathit{i},\mathit{j}\right)$th element of the sample crosscorrelation at lag
$\mathit{l}$, for
$\mathit{l}=1,2,\dots ,m$,
$\mathit{i}=1,2,\dots ,k$ and
$\mathit{j}=1,2,\dots ,k$, where series
$\mathit{j}$ leads series
$\mathit{i}$.
 6:
$\mathbf{maxlag}$ – Integer *Output

On exit: the maximum lag up to which partial lag correlation matrices (along with
${\chi}^{2}$statistics and their significance levels) have been successfully computed. On a successful exit
maxlag will equal
m. If
${\mathbf{fail}}\mathbf{.}\mathbf{code}=$ MATRIX_ILL_CONDITIONED on exit, then
maxlag will be less than
m.
 7:
$\mathbf{parlag}\left[{\mathbf{k}}\times {\mathbf{k}}\times {\mathbf{m}}\right]$ – doubleInput/Output

On exit: ${\mathbf{parlag}}\left[\left(\mathit{l}1\right){k}^{2}+\left(\mathit{j}1\right)k+\mathit{i}1\right]$ contains the $\left(\mathit{i},\mathit{j}\right)$th element of the sample partial lag correlation matrix at lag $\mathit{l}$, for $\mathit{l}=1,2,\dots ,{\mathbf{maxlag}}$, $\mathit{i}=1,2,\dots ,k$ and $\mathit{j}=1,2,\dots ,k$.
 8:
$\mathbf{x}\left[{\mathbf{m}}\right]$ – doubleOutput

On exit: ${\mathbf{x}}\left[\mathit{l}1\right]$ contains the ${\chi}^{2}$statistic at lag $\mathit{l}$, for $\mathit{l}=1,2,\dots ,{\mathbf{maxlag}}$.
 9:
$\mathbf{pvalue}\left[{\mathbf{m}}\right]$ – doubleOutput

On exit:
${\mathbf{pvalue}}\left[\mathit{l}1\right]$ contains the significance level of the corresponding
${\chi}^{2}$statistic in
x, for
$\mathit{l}=1,2,\dots ,{\mathbf{maxlag}}$.
 10:
$\mathbf{fail}$ – NagError *Input/Output

The NAG error argument (see
Section 3.6 in the Essential Introduction).
6 Error Indicators and Warnings
 MATRIX_ILL_CONDITIONED

The recursive equations used to compute the partial lag correlation matrices are illconditioned (they have been computed up to lag $\u2329\mathit{\text{value}}\u232a$).
 NE_ALLOC_FAIL

Dynamic memory allocation failed.
See
Section 3.2.1.2 in the Essential Introduction for further information.
 NE_BAD_PARAM

On entry, argument $\u2329\mathit{\text{value}}\u232a$ had an illegal value.
 NE_INT

On entry, ${\mathbf{k}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{k}}\ge 1$.
On entry, ${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{m}}\ge 1$.
On entry, ${\mathbf{n}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{n}}\ge 2$.
 NE_INT_2

On entry, ${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$ and ${\mathbf{n}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{m}}<{\mathbf{n}}$.
 NE_INTERNAL_ERROR

An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact
NAG for assistance.
An unexpected error has been triggered by this function. Please contact
NAG.
See
Section 3.6.6 in the Essential Introduction for further information.
 NE_NO_LICENCE

Your licence key may have expired or may not have been installed correctly.
See
Section 3.6.5 in the Essential Introduction for further information.
7 Accuracy
The accuracy will depend upon the accuracy of the sample crosscorrelations.
8 Parallelism and Performance
nag_tsa_multi_part_lag_corr (g13dnc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_tsa_multi_part_lag_corr (g13dnc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the
X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the
Users' Note for your implementation for any additional implementationspecific information.
The time taken is roughly proportional to ${m}^{2}{k}^{3}$.
If you have calculated the sample crosscorrelation matrices in the arrays
r0 and
r, without calling
nag_tsa_multi_cross_corr (g13dmc), then care must be taken to ensure they are supplied as described in
Section 5. In particular, for
$l\ge 1$,
${\hat{R}}_{ij}\left(l\right)$ must contain the sample crosscorrelation coefficient between
${w}_{i\left(tl\right)}$ and
${w}_{jt}$.
The function
nag_tsa_multi_auto_corr_part (g13dbc) computes squared partial autocorrelations for a specified number of lags. It may also be used to estimate a sequence of partial autoregression matrices at lags
$1,2,\dots \text{}$ by making repeated calls to the function with the argument
nk set to
$1,2,\dots \text{}$. The
$\left(i,j\right)$th element of the sample partial autoregression matrix at lag
$l$ is given by
$W\left(i,j,l\right)$ when
nk is set equal to
$l$ on entry to
nag_tsa_multi_auto_corr_part (g13dbc). Note that this is the ‘Yule–Walker’ estimate. Unlike the partial lag correlation matrices computed by nag_tsa_multi_part_lag_corr (g13dnc), when
${W}_{t}$ follows an autoregressive model of order
$s1$, the elements of the sample partial autoregressive matrix at lag
$s$ do not have variance
$1/n$, making it very difficult to spot a possible cutoff point. The differences between these matrices are discussed further by
Wei (1990).
Note that
nag_tsa_multi_auto_corr_part (g13dbc) takes the sample crosscovariance matrices as input whereas this function requires the sample crosscorrelation matrices to be input.
10 Example
This example computes the sample partial lag correlation matrices of two time series of length $48$, up to lag $10$. The matrices, their ${\chi}^{2}$statistics and significance levels and a plot of symbols indicating which elements of the sample partial lag correlation matrices are significant are printed. Three * represent significance at the $0.5$% level, two * represent significance at the 1% level and a single * represents significance at the 5% level. The * are plotted above or below the central line depending on whether the elements are significant in a positive or negative direction.
10.1 Program Text
Program Text (g13dnce.c)
10.2 Program Data
Program Data (g13dnce.d)
10.3 Program Results
Program Results (g13dnce.r)