NAG Library Function Document

nag_sparse_nherm_fac (f11dnc)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

nag_sparse_nherm_fac (f11dnc) computes an incomplete LU factorization of a complex sparse non-Hermitian matrix, represented in coordinate storage format. This factorization may be used as a preconditioner in combination with nag_sparse_nherm_basic_solver (f11bsc) or nag_sparse_nherm_fac_sol (f11dqc).

2
Specification

#include <nag.h>
#include <nagf11.h>
void  nag_sparse_nherm_fac (Integer n, Integer nnz, Complex a[], Integer la, Integer irow[], Integer icol[], Integer lfill, double dtol, Nag_SparseNsym_Piv pstrat, Nag_SparseNsym_Fact milu, Integer ipivp[], Integer ipivq[], Integer istr[], Integer idiag[], Integer *nnzc, Integer *npivm, NagError *fail)

3
Description

nag_sparse_nherm_fac (f11dnc) computes an incomplete LU factorization (see Meijerink and Van der Vorst (1977) and Meijerink and Van der Vorst (1981)) of a complex sparse non-Hermitian n by n matrix A. The factorization is intended primarily for use as a preconditioner with one of the iterative solvers nag_sparse_nherm_basic_solver (f11bsc) or nag_sparse_nherm_fac_sol (f11dqc).
The decomposition is written in the form
A=M+R,  
where
M=PLDUQ  
and L is lower triangular with unit diagonal elements, D is diagonal, U is upper triangular with unit diagonals, P and Q are permutation matrices, and R is a remainder matrix.
The amount of fill-in occurring in the factorization can vary from zero to complete fill, and can be controlled by specifying either the maximum level of fill lfill, or the drop tolerance dtol.
The argument pstrat defines the pivoting strategy to be used. The options currently available are no pivoting, user-defined pivoting, partial pivoting by columns for stability, and complete pivoting by rows for sparsity and by columns for stability. The factorization may optionally be modified to preserve the row-sums of the original matrix.
The sparse matrix A is represented in coordinate storage (CS) format (see Section 2.1.1 in the f11 Chapter Introduction). The array a stores all the nonzero elements of the matrix A, while arrays irow and icol store the corresponding row and column indices respectively. Multiple nonzero elements may not be specified for the same row and column index.
The preconditioning matrix M is returned in terms of the CS representation of the matrix
C=L+D-1+U-2I.  
Further algorithmic details are given in Section 9.3.

4
References

Meijerink J and Van der Vorst H (1977) An iterative solution method for linear systems of which the coefficient matrix is a symmetric M-matrix Math. Comput. 31 148–162
Meijerink J and Van der Vorst H (1981) Guidelines for the usage of incomplete decompositions in solving sets of linear equations as they occur in practical problems J. Comput. Phys. 44 134–155

5
Arguments

1:     n IntegerInput
On entry: n, the order of the matrix A.
Constraint: n1.
2:     nnz IntegerInput
On entry: the number of nonzero elements in the matrix A.
Constraint: 1nnzn2.
3:     a[la] ComplexInput/Output
On entry: the nonzero elements in the matrix A, ordered by increasing row index, and by increasing column index within each row. Multiple entries for the same row and column indices are not permitted. The function nag_sparse_nherm_sort (f11znc) may be used to order the elements in this way.
On exit: the first nnz entries of a contain the nonzero elements of A and the next nnzc entries contain the elements of the matrix C. Matrix elements are ordered by increasing row index, and by increasing column index within each row.
4:     la IntegerInput
On entry: the dimension of the arrays a, irow and icol. These arrays must be of sufficient size to store both A (nnz elements) and C (nnzc elements).
Constraint: la2×nnz.
5:     irow[la] IntegerInput/Output
6:     icol[la] IntegerInput/Output
On entry: the row and column indices of the nonzero elements supplied in a.
Constraints:
irow and icol must satisfy these constraints (which may be imposed by a call to nag_sparse_nherm_sort (f11znc)):
  • 1irow[i-1]n and 1icol[i-1]n, for i=1,2,,nnz;
  • either irow[i-1]<irow[i] or both irow[i-1]=irow[i] and icol[i-1]<icol[i], for i=1,2,,nnz.
On exit: the row and column indices of the nonzero elements returned in a.
7:     lfill IntegerInput
On entry: if lfill0 its value is the maximum level of fill allowed in the decomposition (see Section 9.2). A negative value of lfill indicates that dtol will be used to control the fill instead.
8:     dtol doubleInput
On entry: if lfill<0, dtol is used as a drop tolerance to control the fill-in (see Section 9.2); otherwise dtol is not referenced.
Constraint: if lfill<0, dtol0.0.
9:     pstrat Nag_SparseNsym_PivInput
On entry: specifies the pivoting strategy to be adopted.
pstrat=Nag_SparseNsym_NoPiv
No pivoting is carried out.
pstrat=Nag_SparseNsym_UserPiv
Pivoting is carried out according to the user-defined input values of ipivp and ipivq.
pstrat=Nag_SparseNsym_PartialPiv
Partial pivoting by columns for stability is carried out.
pstrat=Nag_SparseNsym_CompletePiv
Complete pivoting by rows for sparsity, and by columns for stability, is carried out.
Suggested value: pstrat=Nag_SparseNsym_CompletePiv.
Constraint: pstrat=Nag_SparseNsym_NoPiv, Nag_SparseNsym_UserPiv, Nag_SparseNsym_PartialPiv or Nag_SparseNsym_CompletePiv.
10:   milu Nag_SparseNsym_FactInput
On entry: indicates whether or not the factorization should be modified to preserve row-sums (see Section 9.4).
milu=Nag_SparseNsym_ModFact
The factorization is modified.
milu=Nag_SparseNsym_UnModFact
The factorization is not modified.
Constraint: milu=Nag_SparseNsym_ModFact or Nag_SparseNsym_UnModFact.
11:   ipivp[n] IntegerInput/Output
12:   ipivq[n] IntegerInput/Output
On entry: if pstrat=Nag_SparseNsym_UserPiv, ipivp[k-1] and ipivq[k-1] must specify the row and column indices of the element used as a pivot at elimination stage k. Otherwise ipivp and ipivq need not be initialized.
Constraint: if pstrat=Nag_SparseNsym_UserPiv, ipivp and ipivq must both hold valid permutations of the integers on [1,n].
On exit: the pivot indices. If ipivp[k-1]=i and ipivq[k-1]=j then the element in row i and column j was used as the pivot at elimination stage k.
13:   istr[n+1] IntegerOutput
On exit: istr[i-1]-1, for i=1,2,,n, is the starting address in the arrays a, irow and icol of row i of the matrix C. istr[n]-1 is the address of the last nonzero element in C plus one.
14:   idiag[n] IntegerOutput
On exit: idiag[i-1], for i=1,2,,n, holds the index of arrays a, irow and icol which holds the diagonal element in row i of the matrix C.
15:   nnzc Integer *Output
On exit: the number of nonzero elements in the matrix C.
16:   npivm Integer *Output
On exit: if npivm>0 it gives the number of pivots which were modified during the factorization to ensure that M exists.
If npivm=-1 no pivot modifications were required, but a local restart occurred (see Section 9.3). The quality of the preconditioner will generally depend on the returned value of npivm.
If npivm is large the preconditioner may not be satisfactory. In this case it may be advantageous to call nag_sparse_nherm_fac (f11dnc) again with an increased value of lfill, a reduced value of dtol, or set pstrat=Nag_SparseNsym_CompletePiv. See also Section 9.5.
17:   fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, n=value.
Constraint: n1.
On entry, nnz=value.
Constraint: nnz1.
NE_INT_2
On entry, la=value and nnz=value.
Constraint: la2×nnz 
On entry, nnz=value and n=value.
Constraint: nnzn2 
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_INVALID_CS
On entry, I=value, icol[I-1]=value and n=value.
Constraint: 1icol[i-1]n, for i=1,2,,nnz 
On entry, I=value, irow[I-1]=value and n=value.
Constraint: 1irow[i-1]n, for i=1,2,,nnz 
NE_INVALID_ROWCOL_PIVOT
On entry, a user-supplied value of ipivp is repeated.
On entry, a user-supplied value of ipivp lies outside the range [1,n].
On entry, a user-supplied value of ipivq is repeated.
On entry, a user-supplied value of ipivq lies outside the range [1,n].
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_NOT_STRICTLY_INCREASING
On entry, a[i-1] is out of order: i=value.
On entry, the location (irow[I-1],icol[I-1]) is a duplicate: I=value.
NE_REAL
On entry, dtol=value.
Constraint: dtol0.0 
NE_TOO_SMALL
The number of nonzero entries in the decomposition is too large. The decomposition has been terminated before completion. Either increase la, or reduce the fill by reducing lfill, or increasing dtol.

7
Accuracy

The accuracy of the factorization will be determined by the size of the elements that are dropped and the size of any modifications made to the pivot elements. If these sizes are small then the computed factors will correspond to a matrix close to A. The factorization can generally be made more accurate by increasing lfill, or by reducing dtol with lfill<0.
If nag_sparse_nherm_fac (f11dnc) is used in combination with nag_sparse_nherm_basic_solver (f11bsc) or nag_sparse_nherm_fac_sol (f11dqc), the more accurate the factorization the fewer iterations will be required. However, the cost of the decomposition will also generally increase.

8
Parallelism and Performance

nag_sparse_nherm_fac (f11dnc) is not threaded in any implementation.

9
Further Comments

9.1
Timing

The time taken for a call to nag_sparse_nherm_fac (f11dnc) is roughly proportional to nnzc2/n.

9.2
Control of Fill-in

If lfill0 the amount of fill-in occurring in the incomplete factorization is controlled by limiting the maximum level of fill-in to lfill. The original nonzero elements of A are defined to be of level 0. The fill level of a new nonzero location occurring during the factorization is defined as:
k=maxke,kc+1,  
where ke is the level of fill of the element being eliminated, and kc is the level of fill of the element causing the fill-in.
If lfill<0 the fill-in is controlled by means of the drop tolerance dtol. A potential fill-in element aij occurring in row i and column j will not be included if:
aij<dtol×α,  
where α is the maximum modulus element in the matrix A.
For either method of control, any elements which are not included are discarded unless milu=Nag_SparseNsym_ModFact, in which case their contributions are subtracted from the pivot element in the relevant elimination row, to preserve the row-sums of the original matrix.
Should the factorization process break down a local restart process is implemented as described in Section 9.3. This will affect the amount of fill present in the final factorization.

9.3
Algorithmic Details

The factorization is constructed row by row. At each elimination stage a row index is chosen. In the case of complete pivoting this index is chosen in order to reduce fill-in. Otherwise the rows are treated in the order given, or some user-defined order.
The chosen row is copied from the original matrix A and modified according to those previous elimination stages which affect it. During this process any fill-in elements are either dropped or kept according to the values of lfill or dtol. In the case of a modified factorization (milu=Nag_SparseNsym_ModFact) the sum of the dropped terms for the given row is stored.
Finally the pivot element for the row is chosen and the multipliers are computed for this elimination stage. For partial or complete pivoting the pivot element is chosen in the interests of stability as the element of largest absolute value in the row. Otherwise the pivot element is chosen in the order given, or some user-defined order.
If the factorization breaks down because the chosen pivot element is zero, or there is no nonzero pivot available, a local restart recovery process is implemented. The modification of the given pivot row according to previous elimination stages is repeated, but this time keeping all fill-in. Note that in this case the final factorization will include more fill than originally specified by the user-supplied value of lfill or dtol. The local restart usually results in a suitable nonzero pivot arising. The original criteria for dropping fill-in elements is then resumed for the next elimination stage (hence the local nature of the restart process). Should this restart process also fail to produce a nonzero pivot element an arbitrary unit pivot is introduced in an arbitrarily chosen column. nag_sparse_nherm_fac (f11dnc) returns an integer argument npivm which gives the number of these arbitrary unit pivots introduced. If no pivots were modified but local restarts occurred npivm=-1 is returned.

9.4
Choice of Arguments

There is unfortunately no choice of the various algorithmic arguments which is optimal for all types of matrix, and some experimentation will generally be required for each new type of matrix encountered. The recommended approach is to start with lfill=0 and pstrat=Nag_SparseNsym_CompletePiv. If the value returned for npivm is significantly larger than zero, i.e., a large number of pivot modifications were required to ensure that M existed, the preconditioner is not likely to be satisfactory. In this case increase lfill until npivm falls to a value close to zero.
For certain classes of matrices (typically those arising from the discretization of elliptic or parabolic partial differential equations) the convergence rate of the preconditioned iterative solver can sometimes be significantly improved by using an incomplete factorization which preserves the row-sums of the original matrix. In these cases try setting milu=Nag_SparseNsym_ModFact.

9.5
Direct Solution of Sparse Linear Systems

Although it is not the primary purpose of the functions nag_sparse_nherm_fac (f11dnc) and nag_sparse_nherm_precon_ilu_solve (f11dpc), they may be used together to obtain a direct solution to a nonsingular sparse complex non-Hermitian linear system. To achieve this the call to nag_sparse_nherm_precon_ilu_solve (f11dpc) should be preceded by a complete LU factorization
A = PLDUQ=M .  
A complete factorization is obtained from a call to nag_sparse_nherm_fac (f11dnc) with lfill<0 and dtol=0.0, provided npivm0 on exit. A positive value of npivm indicates that A is singular, or ill-conditioned. A factorization with positive npivm may serve as a preconditioner, but will not result in a direct solution. It is therefore essential to check the output value of npivm if a direct solution is required.
The use of nag_sparse_nherm_fac (f11dnc) and nag_sparse_nherm_precon_ilu_solve (f11dpc) as a direct method is illustrated in nag_sparse_nherm_precon_ilu_solve (f11dpc).

10
Example

This example reads in a complex sparse non-Hermitian matrix A and calls nag_sparse_nherm_fac (f11dnc) to compute an incomplete LU factorization. It then outputs the nonzero elements of both A and C=L+D-1+U-2I.
The call to nag_sparse_nherm_fac (f11dnc) has lfill=0, and pstrat=Nag_SparseNsym_CompletePiv, giving an unmodified zero-fill LU factorization, with row pivoting for sparsity and column pivoting for stability.

10.1
Program Text

Program Text (f11dnce.c)

10.2
Program Data

Program Data (f11dnce.d)

10.3
Program Results

Program Results (f11dnce.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017