NAG Library Routine Document
c06rcf (fft_real_qtrsine_simple)
1
Purpose
c06rcf computes the discrete quarterwave Fourier sine transforms of $m$ sequences of real data values.
2
Specification
Fortran Interface
Integer, Intent (In)  ::  m, n  Integer, Intent (Inout)  ::  ifail  Real (Kind=nag_wp), Intent (Inout)  ::  x(m*(n+2)), work(*)  Character (1), Intent (In)  ::  direct 

3
Description
Given
$m$ sequences of
$n$ real data values
${x}_{\mathit{j}}^{\mathit{p}}$, for
$\mathit{j}=1,2,\dots ,n$ and
$\mathit{p}=1,2,\dots ,m$,
c06rcf simultaneously calculates the quarterwave Fourier sine transforms of all the sequences defined by
or its inverse
where
$k=1,2,\dots ,n$ and
$p=1,2,\dots ,m$.
(Note the scale factor $\frac{1}{\sqrt{n}}$ in this definition.)
A call of c06rcf with ${\mathbf{direct}}=\text{'F'}$ followed by a call with ${\mathbf{direct}}=\text{'B'}$ will restore the original data.
The transform calculated by this routine can be used to solve Poisson's equation when the solution is specified at the left boundary, and the derivative of the solution is specified at the right boundary (see
Swarztrauber (1977)).
The routine uses a variant of the fast Fourier transform (FFT) algorithm (see
Brigham (1974)) known as the Stockham selfsorting algorithm, described in
Temperton (1983), together with pre and postprocessing stages described in
Swarztrauber (1982). Special coding is provided for the factors
$2$,
$3$,
$4$ and
$5$.
4
References
Brigham E O (1974) The Fast Fourier Transform Prentice–Hall
Swarztrauber P N (1977) The methods of cyclic reduction, Fourier analysis and the FACR algorithm for the discrete solution of Poisson's equation on a rectangle SIAM Rev. 19(3) 490–501
Swarztrauber P N (1982) Vectorizing the FFT's Parallel Computation (ed G Rodrique) 51–83 Academic Press
Temperton C (1983) Fast mixedradix real Fourier transforms J. Comput. Phys. 52 340–350
5
Arguments
 1: $\mathbf{direct}$ – Character(1)Input

On entry: if the forward transform as defined in
Section 3 is to be computed,
direct must be set equal to 'F'.
If the backward transform is to be computed,
direct must be set equal to 'B'.
Constraint:
${\mathbf{direct}}=\text{'F'}$ or $\text{'B'}$.
 2: $\mathbf{m}$ – IntegerInput

On entry: $m$, the number of sequences to be transformed.
Constraint:
${\mathbf{m}}\ge 1$.
 3: $\mathbf{n}$ – IntegerInput

On entry: $n$, the number of real values in each sequence.
Constraint:
${\mathbf{n}}\ge 1$.
 4: $\mathbf{x}\left({\mathbf{m}}\times \left({\mathbf{n}}+2\right)\right)$ – Real (Kind=nag_wp) arrayInput/Output

On entry:
the data must be stored in
x as if in a twodimensional array of dimension
$\left(1:{\mathbf{m}},1:{\mathbf{n}}+2\right)$; each of the
$m$ sequences is stored in a
row of the array.
In other words, if the data values of the
$\mathit{p}$th sequence to be transformed are denoted by
${x}_{\mathit{j}}^{\mathit{p}}$, for
$\mathit{j}=1,2,\dots ,n$ and
$\mathit{p}=1,2,\dots ,m$, the first
$mn$ elements of the array
x must contain the values
The
$\left(n+1\right)$th and
$\left(n+2\right)$th elements of each row
${x}_{n+1}^{\mathit{p}},{x}_{n+2}^{\mathit{p}}$, for
$\mathit{p}=1,2,\dots ,m$, are required as workspace. These
$2m$ elements may contain arbitrary values as they are set to zero by the routine.
On exit:
the
$m$ quarterwave sine transforms stored as if in a twodimensional array of dimension
$\left(1:{\mathbf{m}},1:{\mathbf{n}}+2\right)$. Each of the
$m$ transforms is stored in a
row of the array, overwriting the corresponding original sequence.
If the
$n$ components of the
$\mathit{p}$th quarterwave sine transform are denoted by
${\hat{x}}_{\mathit{k}}^{\mathit{p}}$, for
$\mathit{k}=1,2,\dots ,n$ and
$\mathit{p}=1,2,\dots ,m$, the
$m\left(n+2\right)$ elements of the array
x contain the values
 5: $\mathbf{work}\left(*\right)$ – Real (Kind=nag_wp) arrayWorkspace

Note: the dimension of the array
work
must be at least
${\mathbf{m}}\times {\mathbf{n}}+2\times {\mathbf{n}}+2\times {\mathbf{m}}+15$.
The workspace requirements as documented for c06rcf may be an overestimate in some implementations.
On exit:
${\mathbf{work}}\left(1\right)$ contains the minimum workspace required for the current values of
m and
n with this implementation.
 6: $\mathbf{ifail}$ – IntegerInput/Output

On entry:
ifail must be set to
$0$,
$1\text{ or}1$. If you are unfamiliar with this argument you should refer to
Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value
$1\text{ or}1$ is recommended. If the output of error messages is undesirable, then the value
$1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is
$0$.
When the value $\mathbf{1}\text{ or}\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit:
${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see
Section 6).
6
Error Indicators and Warnings
If on entry
${\mathbf{ifail}}=0$ or
$1$, explanatory error messages are output on the current error message unit (as defined by
x04aaf).
Errors or warnings detected by the routine:
 ${\mathbf{ifail}}=1$

On entry,  ${\mathbf{m}}<1$. 
 ${\mathbf{ifail}}=2$

On entry,  ${\mathbf{n}}<1$. 
 ${\mathbf{ifail}}=3$

On entry,  ${\mathbf{direct}}\ne \text{'F'}$ or $\text{'B'}$. 
 ${\mathbf{ifail}}=4$

An unexpected error has occurred in an internal call. Check all subroutine calls and array dimensions. Seek expert help.
 ${\mathbf{ifail}}=99$
An unexpected error has been triggered by this routine. Please
contact
NAG.
See
Section 3.9 in How to Use the NAG Library and its Documentation for further information.
 ${\mathbf{ifail}}=399$
Your licence key may have expired or may not have been installed correctly.
See
Section 3.8 in How to Use the NAG Library and its Documentation for further information.
 ${\mathbf{ifail}}=999$
Dynamic memory allocation failed.
See
Section 3.7 in How to Use the NAG Library and its Documentation for further information.
7
Accuracy
Some indication of accuracy can be obtained by performing a subsequent inverse transform and comparing the results with the original sequence (in exact arithmetic they would be identical).
8
Parallelism and Performance
c06rcf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
c06rcf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the
X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the
Users' Note for your implementation for any additional implementationspecific information.
The time taken by c06rcf is approximately proportional to $nm\mathrm{log}\left(n\right)$, but also depends on the factors of $n$. c06rcf is fastest if the only prime factors of $n$ are $2$, $3$ and $5$, and is particularly slow if $n$ is a large prime, or has large prime factors.
10
Example
This example reads in sequences of real data values and prints their quarterwave sine transforms as computed by c06rcf with ${\mathbf{direct}}=\text{'F'}$. It then calls the routine again with ${\mathbf{direct}}=\text{'B'}$ and prints the results which may be compared with the original data.
10.1
Program Text
Program Text (c06rcfe.f90)
10.2
Program Data
Program Data (c06rcfe.d)
10.3
Program Results
Program Results (c06rcfe.r)