NAG Library Routine Document
g05phf (times_arma)
1
Purpose
g05phf generates a realization of a univariate time series from an autoregressive moving average (ARMA) model. The realization may be continued or a new realization generated at subsequent calls to g05phf.
2
Specification
Fortran Interface
Subroutine g05phf ( 
mode, n, xmean, ip, phi, iq, theta, avar, r, lr, state, var, x, ifail) 
Integer, Intent (In)  ::  mode, n, ip, iq, lr  Integer, Intent (Inout)  ::  state(*), ifail  Real (Kind=nag_wp), Intent (In)  ::  xmean, phi(ip), theta(iq), avar  Real (Kind=nag_wp), Intent (Inout)  ::  r(lr)  Real (Kind=nag_wp), Intent (Out)  ::  var, x(n) 

C Header Interface
#include nagmk26.h
void 
g05phf_ (const Integer *mode, const Integer *n, const double *xmean, const Integer *ip, const double phi[], const Integer *iq, const double theta[], const double *avar, double r[], const Integer *lr, Integer state[], double *var, double x[], Integer *ifail) 

3
Description
Let the vector
${x}_{t}$, denote a time series which is assumed to follow an autoregressive moving average (ARMA) model of the form:
where
${\epsilon}_{t}$, is a residual series of independent random perturbations assumed to be Normally distributed with zero mean and variance
${\sigma}^{2}$. The parameters
$\left\{{\varphi}_{i}\right\}$, for
$\mathit{i}=1,2,\dots ,p$, are called the autoregressive (AR) parameters, and
$\left\{{\theta}_{j}\right\}$, for
$\mathit{j}=1,2,\dots ,q$, the moving average (MA) parameters. The parameters in the model are thus the
$p$ $\varphi $ values, the
$q$ $\theta $ values, the mean
$\mu $ and the residual variance
${\sigma}^{2}$.
g05phf sets up a reference vector containing initial values corresponding to a stationary position using the method described in
Tunnicliffe–Wilson (1979). The routine can then return a realization of
${x}_{1},{x}_{2},\dots ,{x}_{n}$. On a successful exit, the recent history is updated and saved in the reference vector
r so that
g05phf may be called again to generate a realization of
${x}_{n+1},{x}_{n+2},\dots $, etc. See the description of the argument
mode in
Section 5 for details.
One of the initialization routines
g05kff (for a repeatable sequence if computed sequentially) or
g05kgf (for a nonrepeatable sequence) must be called prior to the first call to
g05phf.
4
References
Knuth D E (1981) The Art of Computer Programming (Volume 2) (2nd Edition) Addison–Wesley
Tunnicliffe–Wilson G (1979) Some efficient computational procedures for high order ARMA models J. Statist. Comput. Simulation 8 301–309
5
Arguments
 1: $\mathbf{mode}$ – IntegerInput

On entry: a code for selecting the operation to be performed by the routine.
 ${\mathbf{mode}}=0$
 Set up reference vector only.
 ${\mathbf{mode}}=1$
 Generate terms in the time series using reference vector set up in a prior call to g05phf.
 ${\mathbf{mode}}=2$
 Set up reference vector and generate terms in the time series.
Constraint:
${\mathbf{mode}}=0$, $1$ or $2$.
 2: $\mathbf{n}$ – IntegerInput

On entry: $n$, the number of observations to be generated.
Constraint:
${\mathbf{n}}\ge 0$.
 3: $\mathbf{xmean}$ – Real (Kind=nag_wp)Input

On entry: the mean of the time series.
 4: $\mathbf{ip}$ – IntegerInput

On entry: $p$, the number of autoregressive coefficients supplied.
Constraint:
${\mathbf{ip}}\ge 0$.
 5: $\mathbf{phi}\left({\mathbf{ip}}\right)$ – Real (Kind=nag_wp) arrayInput

On entry: the autoregressive coefficients of the model, ${\varphi}_{1},{\varphi}_{2},\dots ,{\varphi}_{p}$.
 6: $\mathbf{iq}$ – IntegerInput

On entry: $q$, the number of moving average coefficients supplied.
Constraint:
${\mathbf{iq}}\ge 0$.
 7: $\mathbf{theta}\left({\mathbf{iq}}\right)$ – Real (Kind=nag_wp) arrayInput

On entry: the moving average coefficients of the model, ${\theta}_{1},{\theta}_{2},\dots ,{\theta}_{q}$.
 8: $\mathbf{avar}$ – Real (Kind=nag_wp)Input

On entry: ${\sigma}^{2}$, the variance of the Normal perturbations.
Constraint:
${\mathbf{avar}}\ge 0.0$.
 9: $\mathbf{r}\left({\mathbf{lr}}\right)$ – Real (Kind=nag_wp) arrayCommunication Array

On entry: if ${\mathbf{mode}}=1$, the reference vector from the previous call to g05phf.
On exit: the reference vector.
 10: $\mathbf{lr}$ – IntegerInput

On entry: the dimension of the array
r as declared in the (sub)program from which
g05phf is called.
Constraint:
${\mathbf{lr}}\ge {\mathbf{ip}}+{\mathbf{iq}}+6+\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left({\mathbf{ip}},{\mathbf{iq}}+1\right)$.
 11: $\mathbf{state}\left(*\right)$ – Integer arrayCommunication Array

Note: the actual argument supplied
must be the array
state supplied to the initialization routines
g05kff or
g05kgf.
On entry: contains information on the selected base generator and its current state.
On exit: contains updated information on the state of the generator.
 12: $\mathbf{var}$ – Real (Kind=nag_wp)Output

On exit: the proportion of the variance of a term in the series that is due to the movingaverage (error) terms in the model. The smaller this is, the nearer is the model to nonstationarity.
 13: $\mathbf{x}\left({\mathbf{n}}\right)$ – Real (Kind=nag_wp) arrayOutput

On exit: contains the next $n$ observations from the time series.
 14: $\mathbf{ifail}$ – IntegerInput/Output

On entry:
ifail must be set to
$0$,
$1\text{ or}1$. If you are unfamiliar with this argument you should refer to
Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value
$1\text{ or}1$ is recommended. If the output of error messages is undesirable, then the value
$1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is
$0$.
When the value $\mathbf{1}\text{ or}\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit:
${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see
Section 6).
6
Error Indicators and Warnings
If on entry
${\mathbf{ifail}}=0$ or
$1$, explanatory error messages are output on the current error message unit (as defined by
x04aaf).
Errors or warnings detected by the routine:
 ${\mathbf{ifail}}=1$

On entry, ${\mathbf{mode}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{mode}}=0$, $1$ or $2$.
 ${\mathbf{ifail}}=2$

On entry, ${\mathbf{n}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{n}}\ge 0$.
 ${\mathbf{ifail}}=4$

On entry, ${\mathbf{ip}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{ip}}\ge 0$.
 ${\mathbf{ifail}}=5$

On entry, the AR parameters are outside the stationarity region.
 ${\mathbf{ifail}}=6$

On entry, ${\mathbf{iq}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{iq}}\ge 0$.
 ${\mathbf{ifail}}=8$

On entry, ${\mathbf{avar}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{avar}}\ge 0.0$.
 ${\mathbf{ifail}}=9$

ip or
iq is not the same as when
r was set up in a previous call.
Previous value of
${\mathbf{ip}}=\u2329\mathit{\text{value}}\u232a$ and
${\mathbf{ip}}=\u2329\mathit{\text{value}}\u232a$.
Previous value of
${\mathbf{iq}}=\u2329\mathit{\text{value}}\u232a$ and
${\mathbf{iq}}=\u2329\mathit{\text{value}}\u232a$.
Reference vector
r has been corrupted or not initialized correctly.
 ${\mathbf{ifail}}=10$

On entry,
lr is not large enough,
${\mathbf{lr}}=\u2329\mathit{\text{value}}\u232a$: minimum length required
$\text{}=\u2329\mathit{\text{value}}\u232a$.
 ${\mathbf{ifail}}=11$

On entry,
state vector has been corrupted or not initialized.
 ${\mathbf{ifail}}=99$
An unexpected error has been triggered by this routine. Please
contact
NAG.
See
Section 3.9 in How to Use the NAG Library and its Documentation for further information.
 ${\mathbf{ifail}}=399$
Your licence key may have expired or may not have been installed correctly.
See
Section 3.8 in How to Use the NAG Library and its Documentation for further information.
 ${\mathbf{ifail}}=999$
Dynamic memory allocation failed.
See
Section 3.7 in How to Use the NAG Library and its Documentation for further information.
7
Accuracy
Any errors in the reference vector's initial values should be very much smaller than the error term; see
Tunnicliffe–Wilson (1979).
8
Parallelism and Performance
g05phf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the
X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the
Users' Note for your implementation for any additional implementationspecific information.
The time taken by g05phf is essentially of order ${\left({\mathbf{ip}}\right)}^{2}$.
Note: The reference vector,
r, contains a copy of the recent history of the series. If attempting to reinitialize the series by calling
g05kff or
g05kgf a call to
g05phf with
${\mathbf{mode}}=0$ must also be made. In the repeatable case the calls to
g05phf should be performed in the same order (at the same point(s) in simulation) every time
g05kff is used. When the generator state is saved and restored using the argument
state, the time series reference vector must be saved and restored as well.
The ARMA model for a time series can also be written as:
where
 ${x}_{n}$ is the observed value of the time series at time $n$,
 $\mathit{NA}$ is the number of autoregressive parameters, ${A}_{i}$,
 $\mathit{NB}$ is the number of moving average parameters, ${B}_{i}$,
 $E$ is the mean of the time series,
and
 ${a}_{t}$ is a series of independent random Standard Normal perturbations.
This is the form used in
g05phf.
This is related to the form given in
Section 3 by:
 ${B}_{1}^{2}={\sigma}^{2}$,
 ${B}_{i+1}={\theta}_{i}\sigma ={\theta}_{i}{B}_{1}\text{, \hspace{1em}}i=1,2,\dots ,q$,
 $\mathit{NB}=q+1$,
 $E=\mu $,
 ${A}_{i}={\varphi}_{i}\text{, \hspace{1em}}i=1,2,\dots ,p$,
 $\mathit{NA}=p$.
10
Example
This example generates values for an autoregressive model given by
where
${\epsilon}_{t}$ is a series of independent random Normal perturbations with variance
$1.0$. The random number generators are initialized by
g05kff and then
g05phf is called to initialize a reference vector and generate a sample of ten observations.
10.1
Program Text
Program Text (g05phfe.f90)
10.2
Program Data
Program Data (g05phfe.d)
10.3
Program Results
Program Results (g05phfe.r)