NAG CL Interface
e04cbc (uncon_​simplex)

Settings help

CL Name Style:


1 Purpose

e04cbc minimizes a general function F(x) of n independent variables x = (x1,x2,,xn) T by the Nelder and Mead simplex method (see Nelder and Mead (1965)). Derivatives of the function need not be supplied.

2 Specification

#include <nag.h>
void  e04cbc (Integer n, double x[], double *f, double tolf, double tolx,
void (*funct)(Integer n, const double xc[], double *fc, Nag_Comm *comm),
void (*monit)(double fmin, double fmax, const double sim[], Integer n, Integer ncall, double serror, double vratio, Nag_Comm *comm),
Integer maxcal, Nag_Comm *comm, NagError *fail)
The function may be called by the names: e04cbc, nag_opt_uncon_simplex or nag_opt_simplex_easy.

3 Description

e04cbc finds an approximation to a minimum of a function F of n variables. You must supply a function to calculate the value of F for any set of values of the variables.
The method is iterative. A simplex of n+1 points is set up in the n-dimensional space of the variables (for example, in 2 dimensions the simplex is a triangle) under the assumption that the problem has been scaled so that the values of the independent variables at the minimum are of order unity. The starting point you have provided is the first vertex of the simplex, the remaining n vertices are generated by e04cbc. The vertex of the simplex with the largest function value is reflected in the centre of gravity of the remaining vertices and the function value at this new point is compared with the remaining function values. Depending on the outcome of this test the new point is accepted or rejected, a further expansion move may be made, or a contraction may be carried out. See Nelder and Mead (1965) and Parkinson and Hutchinson (1972) for more details. When no further progress can be made the sides of the simplex are reduced in length and the method is repeated.
The method can be slow, but computational bottlenecks have been reduced following Singer and Singer (2004). However, e04cbc is robust, and, therefore, very useful for functions that are subject to inaccuracies.
There are the following options for successful termination of the method: based only on the function values at the vertices of the current simplex (see (1)); based only on a volume ratio between the current simplex and the initial one (see (2)); or based on which one of the previous two tests passes first. The volume test may be useful if F is discontinuous, while the function-value test should be sufficient on its own if F is continuous.

4 References

Nelder J A and Mead R (1965) A simplex method for function minimization Comput. J. 7 308–313
Parkinson J M and Hutchinson D (1972) An investigation into the efficiency of variants of the simplex method Numerical Methods for Nonlinear Optimization (ed F A Lootsma) Academic Press
Singer S and Singer S (2004) Efficient implementation of the Nelder–Mead search algorithm Appl. Num. Anal. Comp. Math. 1(3) 524–534

5 Arguments

1: n Integer Input
On entry: n, the number of variables.
Constraint: n1.
2: x[n] double Input/Output
On entry: a guess at the position of the minimum. Note that the problem should be scaled so that the values of the x[i-1] are of order unity.
On exit: the value of x corresponding to the function value in f.
3: f double * Output
On exit: the lowest function value found.
4: tolf double Input
On entry: the error tolerable in the function values, in the following sense. If fi, for i=1,2,,n+1, are the individual function values at the vertices of the current simplex, and if fm is the mean of these values, then you can request that e04cbc should terminate if
1 n+1 i=1 n+1 (fi-fm) 2 < tolf . (1)
You may specify tolf=0 if you wish to use only the termination criterion (2) on the spatial values: see the description of tolx.
Constraint: tolf must be greater than or equal to the machine precision (see Chapter X02), or if tolf equals zero, then tolx must be greater than or equal to the machine precision.
5: tolx double Input
On entry: the error tolerable in the spatial values, in the following sense. If LV denotes the ‘linearized’ volume of the current simplex, and if LVinit denotes the ‘linearized’ volume of the initial simplex, then you can request that e04cbc should terminate if
LV LV init < tolx . (2)
You may specify tolx=0 if you wish to use only the termination criterion (1) on function values: see the description of tolf.
Constraint: tolx must be greater than or equal to the machine precision (see Chapter X02), or if tolx equals zero, then tolf must be greater than or equal to the machine precision.
6: funct function, supplied by the user External Function
funct must evaluate the function F at a specified point. It should be tested separately before being used in conjunction with e04cbc.
The specification of funct is:
void  funct (Integer n, const double xc[], double *fc, Nag_Comm *comm)
1: n Integer Input
On entry: n, the number of variables.
2: xc[n] const double Input
On entry: the point at which the function value is required.
3: fc double * Output
On exit: the value of the function F at the current point x.
4: comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to funct.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling e04cbc you may allocate memory and initialize these pointers with various quantities for use by funct when called from e04cbc (see Section 3.1.1 in the Introduction to the NAG Library CL Interface).
Note: funct should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by e04cbc. If your code inadvertently does return any NaNs or infinities, e04cbc is likely to produce unexpected results.
7: monit function, supplied by the user External Function
monit may be used to monitor the optimization process. It is invoked once every iteration.
If no monitoring is required, monit may be specified as NULLFN.
The specification of monit is:
void  monit (double fmin, double fmax, const double sim[], Integer n, Integer ncall, double serror, double vratio, Nag_Comm *comm)
1: fmin double Input
On entry: the smallest function value in the current simplex.
2: fmax double Input
On entry: the largest function value in the current simplex.
3: sim[(n+1)×n] const double Input
On entry: the n+1 position vectors of the current simplex, where sim[(j-1)×(n+1)+i-1] is the jth coordinate of the ith position vector.
4: n Integer Input
On entry: n, the number of variables.
5: ncall Integer Input
On entry: the number of times that funct has been called so far.
6: serror double Input
On entry: the current value of the standard deviation in function values used in termination test (1).
7: vratio double Input
On entry: the current value of the linearized volume ratio used in termination test (2).
8: comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to monit.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling e04cbc you may allocate memory and initialize these pointers with various quantities for use by monit when called from e04cbc (see Section 3.1.1 in the Introduction to the NAG Library CL Interface).
8: maxcal Integer Input
On entry: the maximum number of function evaluations to be allowed.
Constraint: maxcal1.
9: comm Nag_Comm *
The NAG communication argument (see Section 3.1.1 in the Introduction to the NAG Library CL Interface).
10: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, maxcal=value.
Constraint: maxcal1.
On entry, n=value.
Constraint: n1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
NE_REAL
On entry, tolf=0.0 and tolx=value.
Constraint: if tolf=0.0 then tolx is greater than or equal to the machine precision.
On entry, tolx=0.0 and tolf=value.
Constraint: if tolx=0.0 then tolf is greater than or equal to the machine precision.
NE_REAL_2
On entry, tolf=value and tolx=value.
Constraint: if tolf0.0 and tolx0.0 then both should be greater than or equal to the machine precision.
NW_TOO_MANY_FEVALS
maxcal function evaluations have been completed without any other termination test passing. Check the coding of funct before increasing the value of maxcal.

7 Accuracy

On a successful exit the accuracy will be as defined by tolf or tolx, depending on which criterion was satisfied first.

8 Parallelism and Performance

Background information to multithreading can be found in the Multithreading documentation.
e04cbc makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

Local workspace arrays of fixed lengths (depending on n) are allocated internally by e04cbc. The total size of these arrays amounts to n2 + 6n+2 double elements.
The time taken by e04cbc depends on the number of variables, the behaviour of the function and the distance of the starting point from the minimum. Each iteration consists of 1 or 2 function evaluations unless the size of the simplex is reduced, in which case n+1 function evaluations are required.

10 Example

This example finds a minimum of the function
F (x1,x2) = ex1 (4x12+2x22+4x1x2+2x2+1) .  
This example uses the initial point (−1,1) (see Section 10.3), and we expect to reach the minimum at (0.5,−1) .

10.1 Program Text

Program Text (e04cbce.c)

10.2 Program Data

None.

10.3 Program Results

Program Results (e04cbce.r)
GnuplotProduced by GNUPLOT 5.4 patchlevel 6 * X gnuplot_plot_1 −1.5 −1 −0.5 0 0.5 1 1.5 −2 −1.5 −1 −0.5 0 0.5 1 1.5 2 Example Program Contours of F Showing the Initial Point (X) and Local Minimum (*)