Advice on Replacement Calls for Withdrawn/Superseded Routines (PDF version)
NAG Library Manual

NAG Library

Advice on Replacement Calls for Withdrawn/Superseded Routines

The following list gives the names of routines that are suitable replacments for routines that have either been withdrawn or superseded since Mark 17.
The list indicates the minimum change necessary, but many of the replacement routines have additional flexibility and you may wish to take advantage of new features. It is strongly recommended that you consult the routine documents.

+ Contents

+ C06 – Summation of Series
    C06DBF
    C06EAF
    C06EBF
    C06ECF
    C06EKF
    C06FRF
    C06FUF
    C06GBF
    C06GCF
    C06GQF
    C06GSF
    C06HAF
    C06HBF
    C06HCF
    C06HDF
+ D01 – Quadrature
    D01BAF
    D01BBF
+ D02 – Ordinary Differential Equations
    D02BAF
    D02BBF
    D02BDF
    D02CAF
    D02CBF
    D02CGF
    D02CHF
    D02EAF
    D02EBF
    D02EGF
    D02EHF
    D02PAF
    D02PCF
    D02PDF
    D02PVF
    D02PWF
    D02PXF
    D02PYF
    D02PZF
    D02QDF
    D02QQF
    D02XAF
    D02XBF
    D02YAF
+ E01 – Interpolation
    E01SEF
    E01SFF
+ E04 – Minimizing or Maximizing a Function
    E04CCF/E04CCA
    E04FDF
    E04GCF
    E04GEF
    E04HFF
    E04JAF
    E04KAF
    E04KCF
    E04LAF
    E04MBF
    E04MZF
    E04NAF
    E04UNF
    E04UPF
    E04VCF
    E04VDF
    E04ZCF/E04ZCA
+ F01 – Matrix Operations, Including Inversion
    F01AAF
    F01AEF
    F01AFF
    F01AGF
    F01AHF
    F01AJF
    F01AKF
    F01ALF
    F01AMF
    F01ANF
    F01APF
    F01ATF
    F01AUF
    F01AVF
    F01AWF
    F01AXF
    F01AYF
    F01AZF
    F01BCF
    F01BDF
    F01BEF
    F01BNF
    F01BPF
    F01BTF
    F01BWF
    F01BXF
    F01LBF
    F01MAF
    F01NAF
    F01QCF
    F01QDF
    F01QEF
    F01QFF
    F01RCF
    F01RDF
    F01REF
    F01RFF
+ F02 – Eigenvalues and Eigenvectors
    F02AAF
    F02ABF
    F02ADF
    F02AEF
    F02AFF
    F02AGF
    F02AJF
    F02AKF
    F02AMF
    F02ANF
    F02APF
    F02AQF
    F02ARF
    F02AVF
    F02AWF
    F02AXF
    F02AYF
    F02BBF
    F02BCF
    F02BDF
    F02BEF
    F02BFF
    F02BJF
    F02BKF
    F02BLF
    F02EAF
    F02EBF
    F02FAF
    F02FCF
    F02FDF
    F02FHF
    F02GAF
    F02GBF
    F02GJF
    F02HAF
    F02HCF
    F02HDF
    F02SWF
    F02SXF
    F02SYF
    F02UWF
    F02UXF
    F02UYF
    F02WEF
    F02XEF
+ F03 – Determinants
    F03AAF
    F03ABF
    F03ACF
    F03ADF
    F03AEF
    F03AFF
    F03AGF
    F03AHF
    F03AMF
+ F04 – Simultaneous Linear Equations
    F04AAF
    F04ACF
    F04ADF
    F04AFF
    F04AGF
    F04AHF
    F04AJF
    F04AKF
    F04ALF
    F04ANF
    F04ARF
    F04AWF
    F04AYF
    F04AZF
    F04EAF
    F04FAF
    F04JAF
    F04JDF
    F04JLF
    F04JMF
    F04KLF
    F04KMF
    F04LDF
    F04MAF
    F04MBF
    F04NAF
    F04YCF
    F04ZCF
+ F11 – Large Scale Linear Systems
    F11BAF
    F11BBF
    F11BCF
    F11GAF
    F11GBF
    F11GCF
+ G04 – Analysis of Variance
    G04ADF
    G04AEF
    G04AFF
+ G05 – Random Number Generators
    G05CAF
    G05CBF
    G05CCF
    G05CFF
    G05CGF
    G05DAF
    G05DBF
    G05DCF
    G05DDF
    G05DEF
    G05DFF
    G05DHF
    G05DJF
    G05DKF
    G05DPF
    G05DRF
    G05DYF
    G05DZF
    G05EAF
    G05EBF
    G05ECF
    G05EDF
    G05EEF
    G05EFF
    G05EGF
    G05EHF
    G05EJF
    G05EWF
    G05EXF
    G05EYF
    G05EZF
    G05FAF
    G05FBF
    G05FDF
    G05FEF
    G05FFF
    G05FSF
    G05GAF
    G05GBF
    G05HDF
    G05HKF
    G05HLF
    G05HMF
    G05HNF
    G05KAF
    G05KBF
    G05KCF
    G05KEF
    G05LAF
    G05LBF
    G05LCF
    G05LDF
    G05LEF
    G05LFF
    G05LGF
    G05LHF
    G05LJF
    G05LKF
    G05LLF
    G05LMF
    G05LNF
    G05LPF
    G05LQF
    G05LXF
    G05LYF
    G05LZF
    G05MAF
    G05MBF
    G05MCF
    G05MDF
    G05MEF
    G05MJF
    G05MKF
    G05MLF
    G05MRF
    G05MZF
    G05NAF
    G05NBF
    G05PAF
    G05PCF
    G05QAF
    G05QBF
    G05QDF
    G05RAF
    G05RBF
    G05YAF
    G05YBF
    G05YCF
    G05YDF
    G05YEF
    G05YFF
    G05YGF
    G05YHF
    G05ZAF

C05 – Roots of One or More Transcendental Equations

C05ADF

Scheduled for withdrawal at Mark 25.
Replaced by C05AYF.
Old: FUNCTION F(XX)
        ...
     END FUNCTION F
     ...
     CALL C05ADF(A,B,EPS,ETA,F,X,IFAIL)
New: FUNCTION F(XX,IUSER,RUSER)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION F
     ...
     INTEGER            :: IUSER(1)
     REAL (KIND=nag_wp) :: RUSER(1)
     ...
     CALL C05AYF(A,B,EPS,ETA,F,X,IUSER,RUSER,IFAIL)

C05AGF

Scheduled for withdrawal at Mark 25.
Replaced by C05AUF.
Old: FUNCTION F(XX)
        ...
     END FUNCTION F
     ...
     CALL C05AGF(X,H,EPS,ETA,F,A,B,IFAIL)
New: FUNCTION F(XX,IUSER,RUSER)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION F
     ...
     INTEGER            :: IUSER(1)
     REAL (KIND=nag_wp) :: RUSER(1)
     ...
     CALL C05AUF(X,H,EPS,ETA,F,A,B,IUSER,RUSER,IFAIL)

C05AJF

Scheduled for withdrawal at Mark 25.
Replaced by C05AWF.
Old: FUNCTION F(XX)
        ...
     END FUNCTION F
     ...
     CALL C05AJF(X,EPS,ETA,F,NFMAX,IFAIL)
New: FUNCTION F(XX,IUSER,RUSER)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION F
     ...
     INTEGER            :: IUSER(1)
     REAL (KIND=nag_wp) :: RUSER(1)
     ...
     CALL C05AWF(X,EPS,ETA,F,NFMAX,IUSER,RUSER,IFAIL)

C05NBF

Scheduled for withdrawal at Mark 25.
Replaced by C05QBF.
Old: SUBROUTINE FCN(N,X,FVEC,IFLAG)
        ...
     END SUBROUTINE FCN
     ...
     CALL C05NBF(FCN,N,X,FVEC,XTOL,WA,LWA,IFAIL)
New: SUBROUTINE FCN(N,X,FVEC,IUSER,RUSER,IFLAG)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION FCN
     ...
     INTEGER            :: IUSER(1)
     REAL (KIND=nag_wp) :: RUSER(1)
     ...
     CALL C05QBF(FCN,N,X,FVEC,XTOL,IUSER,RUSER,IFAIL)

C05NCF

Scheduled for withdrawal at Mark 25.
Replaced by C05QCF.
Old: SUBROUTINE FCN(N,X,FVEC,IFLAG)
        ...
     END SUBROUTINE FCN
     ...
     REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05NCF(FCN,N,X,FVEC,XTOL,MAXFEV,ML,MU,EPSFCN,DIAG,MODE,FACTOR, &
                 NPRINT,NFEV,FJAC,LDFJAC,R,LR,QTF,W,IFAIL)
New: SUBROUTINE FCN(N,X,FVEC,IUSER,RUSER,IFLAG)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION FCN
     ...
     INTEGER            :: IUSER(1)
     REAL (KIND=nag_wp) :: FJAC(N,N), RUSER(1)
     ...
     CALL C05QCF(FCN,N,X,FVEC,XTOL,MAXFEV,ML,MU,EPSFCN,MODE,DIAG,FACTOR, &
                 NPRINT,NFEV,FJAC,R,QTF,IUSER,RUSER,IFAIL)

C05NDF

Scheduled for withdrawal at Mark 25.
Replaced by C05QDF.
Old: REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05NDF(IREVCM,N,X,FVEC,XTOL,ML,MU,EPSFCN,DIAG,MODE,FACTOR, &
                 FJAC,LDFJAC,R,LR,QTF,W,IFAIL)
New: REAL (KIND=nag_wp) :: FJAC(N,N), RWSAV(4*N+20)
     INTEGER            :: IWSAV(17)
     ...
     CALL C05QDF(IREVCM,N,X,FVEC,XTOL,ML,MU,EPSFCN,MODE,DIAG,FACTOR, &
                 FJAC,R,QTF,IWSAV,RWSAV,IFAIL)

C05PBF/C05PBA

Scheduled for withdrawal at Mark 25.
Replaced by C05RBF.
Old: SUBROUTINE FCN_C05PBF(N,X,FVEC,FJAC,LDFJAC,IFLAG)
        ...
     END SUBROUTINE FCN_C05PBF
     ...
     REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05PBF(FCN_C05PBF,N,X,FVEC,FJAC,LDFJAC,XTOL,WA,LWA,IFAIL)
        or
     SUBROUTINE FCN_C05PBA(N,X,FVEC,FJAC,LDFJAC,IFLAG,IUSER,RUSER)
        ...
     END SUBROUTINE FCN_C05PBA
     ...
     REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05PBA(FCN_C05PBA,N,X,FVEC,FJAC,LDFJAC,XTOL,WA,LWA,IUSER,RUSER,IFAIL)
New: SUBROUTINE FCN(N,X,FVEC,FJAC,IUSER,RUSER,IFLAG)
        ...
     END SUBROUTINE FCN
     ...
     REAL (KIND=nag_wp) :: FJAC(N,N)
     ...
     CALL C05RBF(FCN,N,X,FVEC,FJAC,XTOL,IUSER,RUSER,IFAIL)

C05PCF/C05PCA

Scheduled for withdrawal at Mark 25.
Replaced by C05RCF.
Old: SUBROUTINE FCN_C05PCF(N,X,FVEC,FJAC,LDFJAC,IFLAG)
        ...
     END SUBROUTINE FCN_C05PCF
     ...
     REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05PCF(FCN_C05PCF,N,X,FVEC,FJAC,LDFJAC,XTOL,MAXFEV,DIAG,MODE,FACTOR, &
                 NPRINT,NFEV,NJEV,R,LR,QTF,W,IFAIL)
        or
     SUBROUTINE FCN_C05PCA(N,X,FVEC,FJAC,LDFJAC,IFLAG,IUSER,RUSER)
        ...
     END SUBROUTINE FCN_C05PCA
     ...
     REAL (KIND=nag_wp) :: FJAC(LDFJAC,N)
     ...
     CALL C05PCA(FCN_C05PCA,N,X,FVEC,FJAC,LDFJAC,XTOL,MAXFEV,DIAG,MODE,FACTOR, &
                 NPRINT,NFEV,NJEV,R,LR,QTF,W,IUSER,RUSER,IFAIL)
New: SUBROUTINE FCN(N,X,FVEC,FJAC,IUSER,RUSER,IFLAG)
        ...
        INTEGER,            INTENT(INOUT) :: IUSER(*)
        REAL (KIND=nag_wp), INTENT(INOUT) :: RUSER(*)
        ...
     END FUNCTION FCN
     ...
     REAL (KIND=nag_wp) :: FJAC(N,N)
     ...
     CALL C05RCF(FCN,N,X,FVEC,FJAC,XTOL,MAXFEV,MODE,DIAG,FACTOR, &
                 NPRINT,NFEV,NJEV,R,QTF,IUSER,RUSER,IFAIL)

C05PDF/C05PDA

Scheduled for withdrawal at Mark 25.
Replaced by C05RDF.
Old: REAL (KIND=nag_wp) :: FJAC(LDFJAC,N), RWSAV(10)
     INTEGER            :: IWSAV(15)
     ...
     CALL C05PDF(IREVCM,N,X,FVEC,FJAC,LDFJAC,XTOL,DIAG,MODE,FACTOR, &
                 R,LR,QTF,W,IFAIL)
        or
     CALL C05PDA(IREVCM,N,X,FVEC,FJAC,LDFJAC,XTOL,DIAG,MODE,FACTOR, &
                 R,LR,QTF,W,LWSAV,IWSAV,RWSAV,IFAIL)
New: REAL (KIND=nag_wp) :: FJAC(N,N), RWSAV(4*N+10)
     INTEGER            :: IWSAV(17)
     ...
     CALL C05RDF(IREVCM,N,X,FVEC,FJAC,XTOL,MODE,DIAG,FACTOR,        &
                 R,QTF,IWSAV,RWSAV,IFAIL)

C05ZAF

Scheduled for withdrawal at Mark 25.
Replaced by C05ZDF.
Old: CALL C05ZAF(M,N,X,FVEC,FJAC,LDFJAC,XP,FVECP,MODE,ERR)
New: IFAIL = 0
     CALL C05ZDF(MODE,M,N,X,FVEC,FJAC,LDFJAC,XP,FVECP,ERR,IFAIL)
The array XP must now have dimension N regardless of the value of MODE, and likewise ERR must now have dimension M regardless. The parameter IFAIL is the standard NAG parameter for error trapping. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.

C06 – Summation of Series

C06DBF

Scheduled for withdrawal at Mark 25.
Replaced by C06DCF.
Old: DO I = 1, LX
        RES(I) = C06DBF(X(I),C,N,S)
     END DO
New: XMIN = -1.0D0
     XMAX = 1.0D0

     SELECT CASE (S)
     CASE (1,2,3)
        S_USE = S
     CASE DEFAULT
        S_USE = 2
     END SELECT

     IFAIL = 0
     CALL C06DCF(X,LX,XMIN,XMAX,C,N,S_USE,RES,IFAIL)
The old routine C06DBF returns a single sum at a time, whereas the new routine C06DCF returns a vector of LX values at once. The parameter IFAIL is the standard NAG parameter for error trapping. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.

C06EAF

Scheduled for withdrawal at Mark 26.
Replaced by C06PAF.
Old: CALL C06EAF(X,N,IFAIL)
New: CALL C06PAF('F',X,N,WORK,IFAIL)
where WORK is a real array of length 3×N+100 and X0:N+1 has been extended by 2 elements from the original X0:N-1. The output values X are stored in a different order with real and imaginary parts stored contiguously. The mapping of output elements is as follows:

C06EBF

Scheduled for withdrawal at Mark 26.
Replaced by C06PAF.
Old: CALL C06EBF(X,N,IFAIL)
New: CALL C06PAF('B',X,N,WORK,IFAIL)
where WORK is a real array of length 3×N+100 and X0:N+1 has been extended by 2 elements from the original X0:N-1. The input values of X are stored in a different order with real and imaginary parts stored contiguously. Also C06PAF performs the inverse transform without the need to first conjugate. If prior conjugation of original array X is assumed then the mapping of input elements is:

C06ECF

Scheduled for withdrawal at Mark 26.
Replaced by C06PCF.
Old: CALL C06ECF(X,Y,N,IFAIL)
New: CALL C06PCF('F',Z,N,WORK,IFAIL)
where WORK is a complex array of length 2×N+15 and Z is a complex array of length N such that Zi=CMPLXXi,Yi, for i=0,1,N-1 on input and output.

C06EKF

Scheduled for withdrawal at Mark 26.
Replaced by C06FKF.
Old: CALL C06EKF(IJOB,X,Y,N,IFAIL)
New: CALL C06FKF(IJOB,X,Y,N,WORK,IFAIL)
where WORK is a real array of length N.

C06FRF

Scheduled for withdrawal at Mark 26.
Replaced by C06PSF.
Old: call C06FRF(m,n,x,y,init,trig,work,ifail)
New: Do j = 1, m*n
         cx(j) = cmplx(x(j),y(j),kind=nag_wp)
     End Do
     Call C06PRF('F',m,n,cx,cwork,ifail)
     x(1:m*n) = real(cx(1:m*n))
     y(1:m*n) = aimag(cx(1:m*n))
where cx and cwork are complex arrays of lengths m×n and n×m+2×n+15 respectively.

C06FUF

Scheduled for withdrawal at Mark 26.
Replaced by C06PUF.
Old: Call C06FUF(m,n,x,y,init,trigm,trign,work,ifail)
New: Do j = 1, m*n
         cx(j) = cmplx(x(j),y(j),kind=nag_wp)
     End Do
     Call C06PUF('F',m,n,cx,cwork,ifail)
     x(1:m*n) = real(cx(1:m*n))
     y(1:m*n) = aimag(cx(1:m*n))
where cx and cwork are complex arrays of lengths m×n and n×m+2×n+2×m+30 respectively.

C06GBF

Scheduled for withdrawal at Mark 26.
There is no replacement for this routine.

C06GCF

Scheduled for withdrawal at Mark 26.
There is no replacement for this routine.

C06GQF

Scheduled for withdrawal at Mark 26.
There is no replacement for this routine.

C06GSF

Scheduled for withdrawal at Mark 26.
There is no replacement for this routine.

C06HAF

Scheduled for withdrawal at Mark 26.
Replaced by C06RAF.
Old: Call c06haf(m,n,x,init,trig,work,ifail)
New: y(1:m*(n-1)) = x(1:m*(n-1))
     Call c06raf(m,n,y,rwork,ifail)
     x(1:m*n) = y(1:m*n)
where y and rwork are real arrays of lengths m×n+2 and m×n+2×n+15 respectively.

C06HBF

Scheduled for withdrawal at Mark 26.
Replaced by C06RAF.
Old: Call c06hbf(m,n,x,init,trig,work,ifail)
New: y(1:m*(n+1)) = x(1:m*(n+1))
     Call c06rbf(m,n,y,rwork,ifail)
     x(1:m*(n+1)) = y(1:m*(n+1))
where y and rwork are real arrays of lengths m×n+3 and m×n+2×n+15 respectively.

C06HCF

Scheduled for withdrawal at Mark 26.
Replaced by C06RCF.
Old: Call c06hcf(direct,m,n,x,init,trig,work,ifail)
New: y(1:m*n) = x(1:m*n)
     Call c06raf(direct,m,n,y,rwork,ifail)
     x(1:m*n) = y(1:m*n)
where y and rwork are real arrays of lengths m×n+2 and m×n+2×n+15 respectively.

C06HDF

Scheduled for withdrawal at Mark 26.
Replaced by C06RDF.
Old: Call c06hdf(direct,m,n,x,init,trig,work,ifail)
New: y(1:m*n) = x(1:m*n)
     Call c06raf(direct,m,n,y,rwork,ifail)
     x(1:m*n) = y(1:m*n)
where y and rwork are real arrays of lengths m×n+2 and m×n+2×n+15 respectively.

D01 – Quadrature

D01BAF

Scheduled for withdrawal at Mark 26.
Replaced by D01UAF.
  Old :  FUNCTION FUN(x)  

          ...
         real(kind=nag_wp) :: FUN 
         real(kind=nag_wp), intent(in) :: X
         FUN = ...
         END FUNCTION

         DINEST = D01BAF(D01XXX,A,B,N,FUN,IFAIL)
         
  New :  SUBROUTINE F(X,NX,FV,IFLAG,IUSER,RUSER)
           ...
        ! see example below
          ...
         END SUBROUTINE F
          ...
          integer :: key
          integer, allocatable :: iuser(:)
          real(kind=nag_wp), allocatable :: ruser(:)
          
         ! set KEY according to quadrature formula
         ! KEY =  0 : (D01XXX=D01BAZ)
         ! KEY = -3 : (D01XXX=D01BAY)
         ! KEY = -4 : (D01XXX=D01BAW)
         ! KEY = -5 : (D01XXX=D01BAX)
         ! KEY = ABS(KEY) for normal weights
         KEY = 0

         allocate(iuser(liuser), ruser(lruser))

         CALL D01UAF(KEY,A,B,N,F,DINEST,IUSER,RUSER,IFAIL)
IUSER and RUSER are arrays available to allow you to pass information to the user-supplied subroutine F.
IFLAG is an integer which you may use to force an immediate exit from D01UAF in case of an error in the user-supplied subroutine F.
F may be used to call the original FUN as follows, although it may be more efficient to recode the integrand.
          SUBROUTINE F(X,NX,FV,IFLAG,IUSER,RUSER)
           ...
           integer, intent(in) :: NX
           integer, intent(inout) :: iflag
           real(kind=nag_wp), intent(in) :: X(NX)
           real(kind=nag_wp), intent(out) :: fv(nx)
           real(kind=wp) , intent(inout) :: ruser(*)
           integer, intent(inout) :: iuser(*)
           integer :: j
           external FUN
           
           do j=1,nx
              FV(j)  = FUN(x(j))
           enddo
           
          END SUBROUTINE F

D01BBF

Scheduled for withdrawal at Mark 26.
Replaced by D01TBF.
  OLD :  CALL D01BBF(D01XXX,A,B,ITYPE,N,WEIGHT,ABSCIS,IFAIL)
  NEW :  
         Integer :: key
         call D01TBF(KEY,A,B,N,WEIGHT,ABSICS,IFAIL)
The supplied subroutines D01XXX and the parameter ITYPE have been combined into a single parameter KEY. KEY<0 is equivalent to ITYPE=1 (adjusted weights). KEY>0 is equivalent to ITYPE=0 (normal weights). KEY indicates the quadrature rule.

D02 – Ordinary Differential Equations

D02BAF

Withdrawn at Mark 18.
Replaced by D02PEF and associated D02P routines.
Old: CALL D02BAF(X,XEND,N,Y,TOL,FCN,W,IFAIL)
New:   THRESH(1:N) = TOL
     CALL D02PQF(N,X,XEND,Y,TOL,THRESH,  &
                  -2,0.0D0,IWSAV,RWSAV,IFAIL)
     CALL D02PEF(F2,N,XEND,X,Y,YP,YMAX,  &
                  IUSER,RUSER,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined routine F2.
The definition of F2 can use the original routine FCN as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: fcn
!     .. Executable Statements ..
      Continue

      Call fcn(t,y,yp)

      Return
    End Subroutine F2

D02BBF

Withdrawn at Mark 18.
Replaced by D02PEF and associated D02P routines.
Old: CALL D02BBF(X,XEND,N,Y,TOL,IRELAB,FCN,OUTPUT,W,IFAIL)
New:   THRES(1:N) = TOL
     CALL D02PQF(N,X,XEND,Y,TOL,THRESH,  &
                  -2,0.0D0,IWSAV,RWSAV,IFAIL)
     CALL D02PEF(F2,N,XEND,X,Y,YP,YMAX,  &
                  IUSER,RUSER,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined routine F2.
The definition of F2 can use the original routine FCN as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: fcn
!     .. Executable Statements ..
      Continue

      Call fcn(t,y,yp)

      Return
    End Subroutine F2

D02BDF

Withdrawn at Mark 18.
Replaced by D02PEF and associated D02P routines.
Old: CALL D02BDF(X,XEND,N,Y,TOL,IRELAB,FCN,STIFF,YNORM,W,   &
                 IW,M,OUTPUT,IFAIL)
     CALL D02PQF(N,X,XEND,Y,TOL,THRESH,  &
                 2,0.0D0,IWSAV,RWSAV,IFAIL)
     ... set XWANT ...
  10 CONTINUE
     CALL D02PEF(F2,N,XEND,X,Y,YP,YMAX,  &
                 IUSER,RUSER,IWSAV,RWSAV,IFAIL)
     IF (XWANT.LT.XEND) THEN
        ... reset XWANT ...
        GO TO 10
     ENDIF
     CALL D02PUF(N,RMSERR,ERRMAX,TERRMX,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined function F2.
The definition of F2 can use the original function FCN as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: fcn
!     .. Executable Statements ..
      Continue

      Call fcn(t,y,yp)

      Return
    End Subroutine F2

D02CAF

Withdrawn at Mark 18.
Replaced by D02CJF.
Old: CALL D02CAF(X,XEND,N,Y,TOL,FCN,W,IFAIL)
New: CALL D02CJF(X,XEND,N,Y,FCN,TOL,'M',D02CJX,D02CJW,W,IFAIL)
D02CJX is a subroutine provided in the NAG Fortran Library and D02CJW is a real function also provided. Both must be declared as EXTERNAL or USEd from the nag_library MODULE. The array W needs to be 5 elements greater in length.

D02CBF

Withdrawn at Mark 18.
Replaced by D02CJF.
Old: CALL D02CBF(X,XEND,N,Y,TOL,IRELAB,FCN,OUTPUT,W,IFAIL)
New: CALL D02CJF(X,XEND,N,Y,FCN,TOL,RELABS,OUTPUT,D02CJW,W,IFAIL)
D02CJW is a real function provided in the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. The array W needs to be 5 elements greater in length. The integer parameter IRELAB (which can take values 0, 1 or 2) is catered for by the new CHARACTER*1 argument RELABS (whose corresponding values are 'M', 'A' and 'R').

D02CGF

Withdrawn at Mark 18.
Replaced by D02CJF.
Old: CALL D02CGF(X,XEND,N,Y,TOL,HMAX,M,VAL,FCN,W,IFAIL)
New: CALL D02CJF(X,XEND,N,Y,FCN,TOL,'M',D02CJX,G,W,IFAIL)
     .
     .
     .
     REAL (KIND=nag_wp) FUNCTION G(X,Y)
     REAL (KIND=nag_wp) X,Y(*)
     G = Y(M)-VAL
     END
D02CJX is a subroutine provided in the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. Note the functionality of HMAX is no longer available directly. Checking the value of YM - VAL  at intervals of length HMAX can be effected by a user-supplied procedure OUTPUT in place of D02CJX in the call described above. See the routine document for D02CJF for more details.

D02CHF

Withdrawn at Mark 18.
Replaced by D02CJF.
Old: CALL D02CHF(X,XEND,N,Y,TOL,IRELAB,HMAX,FCN,G,W,IFAIL)
New: CALL D02CJF(X,XEND,N,Y,FCN,TOL,RELABS,D02CJX,G,W,IFAIL)
D02CJX is a subroutine provided by the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. The functionality of HMAX can be provided as described under the replacement call for D02CGF. The relationship between the parameters IRELAB and RELABS is described under the replacement call for D02CBF.

D02EAF

Withdrawn at Mark 18.
Replaced by D02EJF.
Old: CALL D02EAF(X,XEND,N,Y,TOL,FCN,W,IW,IFAIL)
New: CALL D02EJF(X,XEND,N,Y,FCN,D02EJY,TOL,'M',D02EJX,D02EJW,W,IW, &
                 IFAIL)
D02EJY and D02EJX are subroutines provided in the NAG Fortran Library and D02EJW is a real function also provided. All must be declared as EXTERNAL or USEd from the nag_library MODULE.

D02EBF

Withdrawn at Mark 18.
Replaced by D02EJF.
Old: CALL D02EBF(X,XEND,N,Y,TOL,IRELAB,FCN,MPED,PEDERV,OUTPUT,W,IW,   &
                 IFAIL)
New: CALL D02EJF(X,XEND,N,Y,FCN,PEDERV,TOL,RELABS,OUTPUT,D02EJW,W,IW, &
                 IFAIL)
D02EJW is a real function provided in the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. The integer parameter IRELAB (which can take values 0, 1 or 2) is catered for by the new CHARACTER*1 argument RELABS (whose corresponding values are 'M', 'A' and 'R'). If MPED = 0  in the call of D02EBF then PEDERV must be the routine D02EJY, which is supplied in the Library and must be declared as EXTERNAL or USEd from the nag_library MODULE.

D02EGF

Withdrawn at Mark 18.
Replaced by D02EJF.
Old: CALL D02EGF(X,XEND,N,Y,TOL,HMAX,M,VAL,FCN,W,IW,IFAIL)
New: CALL D02EJF(X,XEND,N,Y,FCN,D02EJY,TOL,'M',D02EJX,G,W,IW,IFAIL)
     .
     .
     .
     REAL (KIND=nag_wp) FUNCTION G(X,Y)
     REAL (KIND=nag_wp) X,Y(*)
     G = Y(M)-VAL
     END
D02EJY and D02EJX are subroutines provided in the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. Note that the functionality of HMAX is no longer available directly. Checking the value of YM - VAL  at intervals of length HMAX can be effected by a user-supplied procedure OUTPUT in place of D02EJX in the call described above. See the routine document for D02EJF for more details.

D02EHF

Withdrawn at Mark 18.
Replaced by D02EJF.
Old: CALL D02EHF(X,XEND,N,Y,TOL,IRELAB,HMAX,MPED,PEDERV,FCN,G,W,IFAIL)
New: CALL D02EJF(X,XEND,N,Y,FCN,PEDERV,TOL,RELABS,D02EJX,G,W,IW,IFAIL)
D02EJX is a subroutine provided by the NAG Fortran Library and must be declared as EXTERNAL or USEd from the nag_library MODULE. The functionality of HMAX can be provided as described under the replacement call for D02EGF. The relationship between the parameters IRELAB and RELABS is described under the replacement call for D02EBF. If MPED = 0  in the call of D02EHF then PEDERV must be the routine D02EJY, which is supplied in the Library and must be declared as EXTERNAL or USEd from the nag_library MODULE.

D02PAF

Withdrawn at Mark 18.
Replaced by D02PEF and associated D02P routines.
Existing programs should be modified to call D02PQF and D02PEF. The interfaces are significantly different and therefore precise details of a replacement call cannot be given. Please consult the appropriate routine documents.

D02PCF

Scheduled for withdrawal at Mark 26.
Replaced by D02PEF and associated D02P routines.
Old: CALL D02PVF(N,TSTART,YINIT,TEND,TOL,THRESH,METHOD,'U',ERRASS, &
                 HSTART,W,LW,IFAIL)
     ...
     CALL D02PCF(F,TWANT,T,Y,YP,YMAX,W,IFAIL)

New: IF (.Not. ERRASS) METHOD = -METHOD
     CALL D02PQF(N,TSTART,TEND,YINIT,TOL,THRESH,METHOD,HSTART,IWSAV, &
                 RWSAV,IFAIL)
     ...
     CALL D02PEF(F2,N,TWANT,T,Y,YP,YMAX,IUSER,RUSER,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined routine F2.
The definition of F2 can use the original routine F as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: f
!     .. Executable Statements ..
      Continue

      Call f(t,y,yp)

      Return
    End Subroutine F2

D02PDF

Scheduled for withdrawal at Mark 26.
Replaced by D02PFF and associated D02P routines.
Old: CALL D02PVF(N,TSTART,YINIT,TEND,TOL,THRESH,METHOD,'U',ERRASS, &
                 HSTART,W,LW,IFAIL)
     ...
     CALL D02PDF(F,T,Y,YP,WORK,IFAIL)

New: IF (.Not. ERRASS) METHOD = -METHOD
     CALL D02PQF(N,TSTART,TEND,YINIT,TOL,THRESH,METHOD,HSTART,IWSAV, &
                 RWSAV,IFAIL)
     ...
     CALL D02PFF(F2,N,T,Y,YP,IUSER,RUSER,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined routine F2.
The definition of F2 can use the original routine F as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: f
!     .. Executable Statements ..
      Continue

      Call f(t,y,yp)

      Return
    End Subroutine F2

D02PVF

Scheduled for withdrawal at Mark 26.
Replaced by D02PQF.
See D02PCF and D02PDF for further information.

D02PWF

Scheduled for withdrawal at Mark 26.
Replaced by D02PRF.
Old: CALL D02PWF(TENDNU,IFAIL)
New: CALL D02PRF(TENDNU,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350.

D02PXF

Scheduled for withdrawal at Mark 26.
Replaced by D02PSF.
Old: CALL D02PXF(TWANT,REQEST,NWANT,YWANT,YPWANT,F,WORK,WRKINT, &
                 LENINT,IFAIL)
New: 
     If (REQEST=='S' .or. REQEST=='s') Then
       IDERIV = 0
     Else if (REQEST=='D' .or. REQEST=='d') Then
       IDERIV = 1
     Else
       IDERIV = 2
     End If
     CALL D02PSF(TWANT,IDERIV,NWANT,YWANT,YPWANT,F2,WORKINT, &
                 LENINT,IUSER,RUSER,IWSAV,RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.
IUSER and RUSER are arrays available to allow you to pass information to the user defined routine F2.
The definition of F2 can use the original routine F as follows:
   SUBROUTINE F2(T,N,Y,YP,IUSER,RUSER)
!     .. Scalar Arguments ..
      Real (Kind=wp), Intent (In)      :: t
      Integer, Intent (In)             :: n
!     .. Array Arguments ..
      Real (Kind=wp), Intent (Inout)   :: ruser(1)
      Real (Kind=wp), Intent (In)      :: y(n)
      Real (Kind=wp), Intent (Out)     :: yp(n)
      Integer, Intent (Inout)          :: iuser(1)
!     .. Procedure Arguments ..
      External                         :: f
!     .. Executable Statements ..
      Continue

      Call f(t,y,yp)

      Return
    End Subroutine F2

D02PYF

Scheduled for withdrawal at Mark 26.
Replaced by D02PTF.
Old: Call D02PYF(TOTFCN,STPCST,WASTE,STPSOK,HNEXT,IFAIL)
New: Call D02PTF(TOTFCN,STPCST,WASTE,STPSOK,HNEXT,IWSAV, &
                 RWSAV,IFAIL)
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350.

D02PZF

Scheduled for withdrawal at Mark 26.
Replaced by D02PUF.
Old: Call D02PZF(RMSERR,ERRMAX,TERRMX,WORK,IFAIL)
New: Call D02PUF(N,RMSERR,ERRMAX,TERRMX,IWSAV,RWSAV,IFAIL)
N must be unchanged from that passed to D02PQF.
IWSAV is an integer array of length 130 and RWSAV is a real array of length 350+32×N.

D02QDF

Withdrawn at Mark 17.
Replaced by D02NBF or D02NCF.
Existing programs should be modified to call D02NSF, D02NVF and D02NBF, or D02NTF, D02NVF and D02NCF. The interfaces are significantly different and therefore precise details of a replacement call cannot be given. Please consult the appropriate routine documents.

D02QQF

Withdrawn at Mark 17.
Replaced by D02NBF or D02NCF.

D02XAF

Withdrawn at Mark 18.
Replaced by D02PSF and associated D02P routines.
Not needed except with D02PAF.

D02XBF

Withdrawn at Mark 18.
Replaced by D02PSF and associated D02P routines.
Not needed except with D02PAF.

D02YAF

Withdrawn at Mark 18.
Replaced by D02PFF and associated D02P routines.
There is no precise equivalent to this routine.

D03 – Partial Differential Equations

D03PAF

Withdrawn at Mark 17.
Replaced by D03PCF/D03PCA.
Existing programs should be modified to call D03PCF/D03PCA. The replacement routine is designed to solve a broader class of problems. Therefore it is not possible to give precise details of a replacement call. Please consult the appropriate routine documents.

D03PBF

Withdrawn at Mark 17.
Replaced by D03PCF/D03PCA.
Existing programs should be modified to call D03PCF/D03PCA. The replacement routine is designed to solve a broader class of problems. Therefore it is not possible to give precise details of a replacement call. Please consult the appropriate routine documents.

D03PGF

Withdrawn at Mark 17.
Replaced by D03PCF/D03PCA.
Existing programs should be modified to call D03PCF/D03PCA. The replacement routine is designed to solve a broader class of problems. Therefore it is not possible to give precise details of a replacement call. Please consult the appropriate routine documents.

E01 – Interpolation

E01SEF

Withdrawn at Mark 20.
Replaced by E01SGF.
Old: CALL E01SEF(M,X,Y,F,RNW,RNQ,NW,NQ,FNODES,MINNQ,WRK,IFAIL)
New: CALL E01SGF(M,X,Y,F,NW,NQ,IQ,LIQ,RQ,LRQ,IFAIL)
E01SEF has been superseded by E01SGF which gives improved accuracy, facilities for obtaining gradient values and a consistent interface with E01TGF for interpolation of scattered data in three dimensions.
The interpolant generated by the two routines will not be identical, but similar results may be obtained by using the same values of NW and NQ. Details of the interpolant are passed to the evaluator through the arrays IQ and RQ rather than FNODES and RNW.

E01SFF

Withdrawn at Mark 20.
Replaced by E01SHF.
Old: CALL E01SFF(M,X,Y,F,RNW,FNODES,PX,PY,PF,IFAIL)
New: CALL E01SHF(M,X,Y,F,IQ,LIQ,RQ,LRQ,1,PX,PY,PF,QX,QY,IFAIL)
The two calls will not produce identical results due to differences in the generation routines E01SEF and E01SGF. Details of the interpolant are passed from E01SGF through the arrays IQ and RQ rather than FNODES and RNW.
E01SHF also returns gradient values in QX and QY and allows evaluation at arrays of points rather than just single points.

E04 – Minimizing or Maximizing a Function

E04CCF/E04CCA

Withdrawn at Mark 24.
Replaced by E04CBF.
Old: CALL E04CCF(N,X,F,TOL,IW,W1,W2,W3,W4,W5,W6,FUNCT,MONIT,MAXCAL,   &
                 IFAIL)
        or
     CALL E04CCA(N,X,F,TOL,IW,W1,W2,W3,W4,W5,W6,FUNCT2,MONIT2,MAXCAL, &
                 IUSER,RUSER,IFAIL)
New: CALL E04CBF(N,X,F,TOLF,TOLX,FUNCT2,MONIT3,MAXCAL,IUSER,RUSER,    &
                 IFAIL)
The new routine can be derived from the old as follows:
       SUBROUTINE         MONIT3(FMIN,FMAX,SIM,N,NCALL,SERROR,VRATIO,IUSER,
                                 RUSER)
       INTEGER            N, NCALL, IUSER(*)
       REAL (KIND=nag_wp) FMIN, FMAX, SIM(N+1,N), SERROR, VRATIO, RUSER(*)

       CALL MONIT2(FMIN,FMAX,SIM,N,N+1,NCALL,IUSER,RUSER)
!      Add code here to monitor the values of SERROR and VRATIO, if necessary
       RETURN
       END

E04FDF

Withdrawn at Mark 19.
Replaced by E04FYF.
Old: CALL E04FDF(M,N,X,FSUMSQ,IW,LIW,W,LW,IFAIL)
New: CALL E04FYF(M,N,LSFUN,X,FSUMSQ,W,LW,IUSER,USER,IFAIL)
LSFUN appears in the parameter list instead of the fixed-name subroutine LSFUN1 of E04FDF. LSFUN must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of LSFUN1. It may be derived from LSFUN1 as follows:
SUBROUTINE         LSFUN(M,N,XC,FVECC,IUSER,USER)
INTEGER            M, N, IUSER(*)
REAL (KIND=nag_wp) XC(N), FVECC(M), USER(*)

CALL LSFUN1(M,N,XC,FVECC)

RETURN
END
In general the extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing. If however, a COMMON block was used to pass information into LSFUN1, or get information from LSFUN1, then the arrays IUSER and USER should be declared appropriately and used for this purpose.

E04GCF

Withdrawn at Mark 19.
Replaced by E04GYF.
Old: CALL E04GCF(M,N,X,FSUMSQ,IW,LIW,W,LW,IFAIL)
New: CALL E04GYF(M,N,LSFUN,X,FSUMSQ,W,LW,IUSER,USER,IFAIL)
LSFUN appears in the parameter list instead of the fixed-name subroutine LSFUN2 of E04GCF. LSFUN must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of LSFUN2. It may be derived from LSFUN2 as follows:
SUBROUTINE         LSFUN(M,N,XC,FVECC,FJACC,LJC,IUSER,USER)
INTEGER            M, N, LJC, IUSER(*)
REAL (KIND=nag_wp) XC(N), FVECC(M), FJACC(LJC,N), USER(*)

CALL LSFUN2(M,N,XC,FVECC,FJACC,LJC)

RETURN
END
In general the extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing. If however, a COMMON block was used to pass information through E04GCF into LSFUN2, or get information from LSFUN2, then the arrays IUSER and USER should be declared appropriately and used for this purpose.

E04GEF

Withdrawn at Mark 19.
Replaced by E04GZF.
Old: CALL E04GEF(M,N,X,FSUMSQ,IW,LIW,W,LW,IFAIL)
New: CALL E04GZF(M,N,LSFUN,X,FSUMSQ,W,LW,IUSER,USER,IFAIL)
LSFUN appears in the parameter list instead of the fixed-name subroutine LSFUN2 of E04GEF. LSFUN must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of LSFUN2. It may be derived from LSFUN2 as follows:
SUBROUTINE         LSFUN(M,N,X,FVECC,FJACC,LJC,IUSER,USER)
INTEGER            M, N, LJC, IUSER(*)
REAL (KIND=nag_wp) XC(N), FVECC(M), FJACC(LJC,N), USER(*)

CALL LSFUN2(M,N,XC,FVECC,FJACC,LJC)

RETURN
END
In general the extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing. If however, a COMMON block was used to pass information through E04GEF into LSFUN2, or get information from LSFUN2, then the arrays IUSER and USER should be declared appropriately and used for this purpose.

E04HFF

Withdrawn at Mark 19.
Replaced by E04HYF.
Old: CALL E04HFF(M,N,X,FSUMSQ,IW,LIW,W,LW,IFAIL)
New: CALL E04HYF(M,N,LSFUN,LSHES,X,FSUMSQ,W,LW,IUSER,USER,IFAIL)
LSFUN and LSHES appear in the parameter list instead of the fixed-name subroutines LSFUN2 and LSHES2 of E04HFF. LSFUN and LSHES must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition they have an extra two parameters, IUSER and USER, over and above those of LSFUN2 and LSHES2. They may be derived from LSFUN2 and LSHES2 as follows:
SUBROUTINE         LSFUN(M,N,XC,FVECC,FJACC,LJC,IUSER,USER)
INTEGER            M, N, LJC, IUSER(*)
REAL (KIND=nag_wp) XC(N), FVECC(M), FJACC(LJC,N), USER(*)

CALL LSFUN2(M,N,XC,FVECC,FJACC,LJC)

RETURN
END

SUBROUTINE         LSHES(M,N,FVECC,XC,B,LB,IUSER,USER)
INTEGER            M, N, LB, IUSER(*)
REAL (KIND=nag_wp) FVECC(M), XC(N), B(LB), USER(*)

CALL LSHES2(M,N,FVECC,XC,B,LB)

RETURN
END
In general, the extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing. If, however, a COMMON block was used to pass information through E04HFF into LSFUN2 or LSHES2, or to get information from LSFUN2 or LSHES2, then the arrays IUSER and RUSER should be declared appropriately and used for this purpose.

E04JAF

Withdrawn at Mark 19.
Replaced by E04JYF.
Old: CALL E04JAF(N,IBOUND,BL,BU,X,F,IW,LIW,LW,IFAIL)
New: CALL E04JYF(N,IBOUND,FUNCT,BL,BU,X,F,IW,LIW,W,LW,IUSER,USER,IFAIL)
FUNCT appears in the parameter list instead of the fixed-name subroutine FUNCT1 of E04JAF. FUNCT must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of FUNCT1. It may be derived from FUNCT1 as follows:
SUBROUTINE         FUNCT(N,XC,FC,IUSER,USER)
INTEGER            N, IUSER(*)
REAL (KIND=nag_wp) XC(N), FC, USER(*)

CALL FUNCT1(N,XC,FC)

RETURN
END
The extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing.

E04KAF

Withdrawn at Mark 19.
Replaced by E04KYF.
Old: CALL E04KAF(N,IBOUND,BL,BU,X,F,G,IW,LIW,W,LW,IFAIL)
New: CALL E04KYF(N,IBOUND,FUNCT,BL,BU,X,F,G,IW,LIW,W,LW,IUSER,USER,IFAIL)
FUNCT appears in the parameter list instead of the fixed-name subroutine FUNCT2 of E04KAF. FUNCT must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of FUNCT2. It may be derived from FUNCT2 as follows:
SUBROUTINE         FUNCT(N,XC,FC,GC,IUSER,USER)
INTEGER            N, IUSER(*)
REAL (KIND=nag_wp) XC(N), FC, GC(N), USER(*)

CALL FUNCT2(N,XC,FC,GC)

RETURN
END
The extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing.

E04KCF

Withdrawn at Mark 19.
Replaced by E04KZF.
Old: CALL E04KCF(N,IBOUND,BL,BU,X,F,G,IW,LIW,W,LW,IFAIL)
New: CALL E04KZF(N,IBOUND,FUNCT,BL,BU,X,F,G,IW,LIW,W,LW,IUSER,USER,IFAIL)
FUNCT appears in the parameter list instead of the fixed-name subroutine FUNCT2 of E04KCF. FUNCT must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition it has an extra two parameters, IUSER and USER, over and above those of FUNCT2. It may be derived from FUNCT2 as follows:
SUBROUTINE         FUNCT(N,XC,FC,GC,IUSER,USER)
INTEGER            N, IUSER(*)
REAL (KIND=nag_wp) XC(N), FC, GC(N), USER(*)

CALL FUNCT2(N,XC,FC,GC)

RETURN
END
The extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing.

E04LAF

Withdrawn at Mark 19.
Replaced by E04LYF.
Old: CALL E04LAF(N,IBOUND,BL,BU,X,F,G,IW,LIW,W,LW,IFAIL)
New: CALL E04LYF(N,IBOUND,FUNCT,HESS,BL,BU,X,F,G,IW,LIW,W,LW,IUSER,USER, &
                 IFAIL)
FUNCT and HESS appear in the parameter list instead of the fixed-name subroutines FUNCT2 and HESS2 of E04LAF. FUNCT and HESS must be declared as EXTERNAL or be a module subprogram USEd in the calling (sub)program. In addition they have an extra two parameters, IUSER and USER, over and above those of FUNCT2 and HESS2. They may be derived from FUNCT2 and HESS2 as follows:
SUBROUTINE         FUNCT(N,XC,FC,GC,IUSER,USER)
INTEGER            N, IUSER(*)
REAL (KIND=nag_wp) XC(N), FC, GC(N), USER(*)

CALL FUNCT2(N,XC,FC,GC)

RETURN
END
SUBROUTINE         HESS(N,XC,HESLC,LH,HESDC,IUSER,USER)
INTEGER            N, LH, IUSER(*)
REAL (KIND=nag_wp) XC(N), HESLC(LH), HESDC(N), USER(*)

CALL HESS2(N,XC,HESLC,LH,HESDC)

RETURN
END
In general, the extra parameters, IUSER and USER, should be declared in the calling program as IUSER1  and USER1 , but will not need initializing.

E04MBF

Withdrawn at Mark 18.
Replaced by E04MFF/E04MFA.
Old: CALL E04MBF(ITMAX,MSGLVL,N,NCLIN,NCTOTL,NROWA,A,BL,BU,CVEC, &
                 LINOBJ,X,ISTATE,OBJLP,CLAMDA,IWORK,LIWORK,WORK, &
                 LWORK,IFAIL)
New: CALL E04MFF(N,NCLIN,A,NROWA,BL,BU,CVEC,ISTATE,X,ITER,OBJLP, &
                 AX,CLAMDA,IWORK,LIWORK,WORK,LWORK,IFAIL)
The parameter NCTOTL is no longer required. Values for ITMAX, MSGLVL and LINOBJ may be supplied by calling an option setting routine.
E04MFF/E04MFA contains two additional parameters as follows:
The minimum value of the parameter LIWORK must be increased from 2 × N  to 2 × N + 3 . The minimum value of the parameter LWORK may also need to be changed. See the routine documents for further information.

E04MZF

Scheduled for withdrawal at Mark 26.
Replaced by E04MXF.
Old: 
mpslst = .false.    ! or = .true. 
Call E04MZF(infile,maxn,maxm,maxnnz,xbldef,xbudef,mpslst,n,m,nnz,iobj, & 
        ncolh,a,irowa,iccola,bl,bu,start,pnames,nname,crname,xs,istate,ifail) 
if (ifail==1 .or. ifail==2 .or. ifail==3) then 
  ! not enough memory, allocate bigger arrays as given in M, N, NNZ 
  ! and call E04MZF again 
else if (ifail>=4 .and. ifail<=16) then 
  ! MPS input file formating error 
  ! stop 
else if (ifail==17) then 
  ! wrong arguments to E04MZF 
  ! stop 
else if (ifail==0) then 
  ! data successfully read, call solver 
end if 
 
New: 
mpslst = 0      ! or = 1 
Call E04MXF(infile,maxn,maxm,maxnnz,maxncolh,maxnnzh,maxlintvar, & 
      mpslst,n,m,nnz,ncolh,nnzh,lintvar,iobj,a,irowa,iccola,bl,bu,pnames, & 
      nname,crname,h,irowh,iccolh,minmax,intvar,ifail) 
 
if (ifail==2) then 
  ! not enough memory, allocate bigger arrays as given in M, N, NNZ, NCOLH, 
  ! NNZH, LINTVAR and call E04MXF again 
else if (ifail>=3 .and. ifail<=35) then 
  ! MPS input file formatting error 
  ! stop 
else if (ifail==36) then 
  ! wrong input argument 
  ! stop 
else if (ifail=-999) then 
  ! internal memory allocation error 
  ! stop 
else if (ifail==0 .or. ifail==1) then 
  ! data successfully read (with possible warning) 
  start = 'C' 
  do j=1,n 
    xs(j) = min(max(0.0_nag_wp,bl(j)),bu(j)) 
    istate(j) = 0.0_nag_wp 
  end do 
  ! call solver 
end if
E04MXF has extended the functionality of E04MZF and the interface has changed substantially. If there are integer variables, a quadratic part of the objective function or OBJSENSE section, E04MXF will read them and return them in the new parameters (LINTVAR, INTVAR, NCOLH, NNZH, H, IROWH, ICCOLH and MINMAX), with E04MZF these caused a file formatting error. The new routine E04MXF might also accept a slightly misformatted input files and return a warning IFAIL=1.
The type of parameter MPSLST has changed from logical to integer.
Parameters XBLDEF, XBUDEF from E04MZF were removed and fixed in E04MXF to their default values 0 and 1020, respectively. Note that value 1020 within bounds is interpreted in our solvers as + (unconstrained).
Parameters START, XS, ISTATE were present in E04MZF only for the convenience of calling the solver routine E04NKF/E04NKA and have been removed from E04MXF.
Should you need any assistance, please do not hesitate to contact NAG.

E04NAF

Withdrawn at Mark 18.
Replaced by E04NFF/E04NFA.
Old: CALL E04NAF(ITMAX,MSGLVL,N,NCLIN,NCTOTL,NROWA,NROWH,NCOLH,  &
                 BIGBND,A,BL,BU,CVEC,FEATOL,HESS,QPHESS,COLD,LP, &
                 ORTHOG,X,ISTATE,ITER,OBJ,CLAMDA,IWORK,LIWORK,   &
                 WORK,LWORK,IFAIL)
New: CALL E04NFF(N,NCLIN,A,NROWA,BL,BU,CVEC,HESS,NROWH,QPHESS,   &
                 ISTATE,X,ITER,OBJ,AX,CLAMDA,IWORK,LIWORK,WORK,  &
                 LWORK,IFAIL)
The specification of the subroutine QPHESS must also be changed as follows:
Old: SUBROUTINE         QPHESS(N,NROWH,NCOLH,JTHCOL,HESS,X,HX)
     INTEGER            N, NROWH, NCOLH, JTHCOL
     REAL (KIND=nag_wp) HESS(NROWH,NCOLH), X(N), HX(N)
New: SUBROUTINE         QPHESS(N,JTHCOL,HESS,NROWH,X,HX)
     INTEGER            N, JTHCOL, NROWH
     REAL (KIND=nag_wp) HESS(NROWH,*), X(N), HX(N)
The parameters NCTOTL, NCOLH and ORTHOG are no longer required. Values for ITMAX, MSGLVL, BIGBND, FEATOL, COLD and LP may be supplied by calling an option setting routine.
E04NFF/E04NFA contains one additional parameter as follows:
The minimum value of the parameter LIWORK must be increased from 2 × N  to 2 × N + 3 . The minimum value of the parameter LWORK may also need to be changed. See the routine documents for further information.

E04UNF

Withdrawn at Mark 22.
Replaced by E04USF/E04USA.
Old: CALL E04UNF(M,N,NCLIN,NCNLN,LDA,LDCJ,LDFJ,     &
                 LDR,A,BL,BU,Y,CONFUN,OBJFUN,ITER,  &
                 ISTATE,C,CJAC,F,FJAC,CLAMDA,OBJF,  &
                 R,X,IWORK,LIWORK,WORK,LWORK,IUSER, &
                 RUSER,IFAIL)
New: CALL E04USF(M,N,NCLIN,NCNLN,LDA,LDCJ,LDFJ,     &
                 LDR,A,BL,BU,Y,CONFUN,OBJFUN,ITER,  &
                 ISTATE,C,CJAC,F,FJAC,CLAMDA,OBJF,  &
                 R,X,IWORK,LIWORK,WORK,LWORK,IUSER, &
                 RUSER,IFAIL)
The specification of the subroutine OBJFUN must also be changed as follows:
Old: SUBROUTINE         OBJFUN(MODE,M,N,LDFJ,X,F,FJAC,NSTATE,IUSER,RUSER)
     INTEGER            MODE,M,N,LDFJ,NSTATE,IUSER(*)
     REAL (KIND=nag_wp) X(N),F(*),FJAC(LDFJ,*),RUSER(*)
New: SUBROUTINE         OBJFUN(MODE,M,N,LDFJ,NEEDFI,X,F,FJAC,NSTATE,      &
                        IUSER,RUSER)
     INTEGER            MODE,M,N,LDFJ,NEEDFI,NSTATE,IUSER(*)
     REAL (KIND=nag_wp) X(N),F(*),FJAC(LDFJ,*),RUSER(*)
See the routine documents for further information.

E04UPF

Withdrawn at Mark 19.
Replaced by E04USF/E04USA.
Old: CALL E04UPF(M,N,NCLIN,NCNLN,LDA,LDCJ,LDFJ,LDR,A,BL,BU, &
                 CONFUN,OBJFUN,ITER,ISTATE,C,CJAC,F,FJAC,   &
                 CLAMDA,OBJF,R,X,IWORK,LIWORK,WORK,LWORK,   &
                 IUSER,USER,IFAIL)
New: CALL E04USF(M,N,NCLIN,NCNLN,LDA,LDCJ,LDFJ,LDR,A,BL,BU, &
                 Y,CONFUN,OBJFUN,ITER,ISTATE,C,CJAC,F,FJAC, &
                 CLAMDA,OBJF, R,X,IWORK,LIWORK,WORK,LWORK,  &
                 IUSER,USER,IFAIL)
E04USF/E04USA contains one additional parameter as follows:
Note that a call to E04UPF is the same as a call to E04USF/E04USA with Yi =0.0 , for i=1,2,,M .
The specification of the subroutine OBJFUN must also be changed as follows:
Old: SUBROUTINE         OBJFUN(MODE,M,N,LDFJ,X,F,FJAC,NSTATE,IUSER,USER)
     INTEGER            MODE,M,N,LDFJ,NSTATE,IUSER(*)
     REAL (KIND=nag_wp) X(N),F(*),FJAC(LDFJ,*),USER(*)
New: SUBROUTINE         OBJFUN(MODE,M,N,LDFJ,NEEDFI,X,F,FJAC,NSTATE,     &
                        IUSER,USER)
     INTEGER            MODE,M,N,NEEFI,NSTATE,IUSER(*)
     REAL (KIND=nag_wp) X(N),F(*),FJAC(LDFJ,*),USER(*)
See the routine documents for further information.

E04VCF

Withdrawn at Mark 17.
Replaced by E04UCF/E04UCA.
Old: CALL E04VCF(ITMAX,MSGLVL,N,NCLIN,NCNLN,NCTOTL,NROWA,NROWJ,     &
                 NROWR,BIGBND,EPSAF,ETA,FTOL,A,BL,BU,FEATOL,        &
                 CONFUN,OBJFUN,COLD,FEALIN,ORTHOG,X,ISTATE,R,ITER,  &
                 C,CJAC,OBJF,OBJGRD,CLAMDA,IWORK,LIWORK,WORK,LWORK, &
                 IFAIL)
New: CALL E04UCF(N,NCLIN,NCNLN,NROWA,NROWJ,NROWR,A,BL,BU,CONFUN,    &
                 OBJFUN,ITER,ISTATE,C,CJAC,CLAMDA,OBJF,OBJGRD,R,X,  &
                 IWORK,LIWORK,WORK,LWORK,IUSER,USER,IFAIL)
The specification of the subroutine OBJFUN must also be changed as follows:
Old: SUBROUTINE         OBJFUN(MODE,N,X,OBJF,OBJGRD,NSTATE)
     INTEGER            MODE, N, NSTATE
     REAL (KIND=nag_wp) X(N), OBJF, OBJGRD(N)
New: SUBROUTINE         OBJFUN(MODE,N,X,OBJF,OBJGRD,NSTATE,IUSER,USER)
     INTEGER            Mode, N, NSTATE, IUSER(*)
     REAL (KIND=nag_wp) X(N), OBJF, OBJGRD(N), USER(*)
If NCNLN > 0 , the specification of the subroutine CONFUN must also be changed as follows:
Old: SUBROUTINE         CONFUN(MODE,NCNLN,N,NROWJ,X,C,CJAC,NSTATE)
     INTEGER            MODE, NCNLN, N, NROWJ, NSTATE
     REAL (KIND=nag_wp) X(N), C(NROWJ), CJAC(NROWJ,N)
New: SUBROUTINE         CONFUN(MODE,NCNLN,N,NROWJ,NEEDC,X,C,CJAC,NSTATE,      &
                        IUSER,USER)
     INTEGER            MODE, NCNLN, N, NROWJ, NEEDC(NCNLN), NSTATE, IUSER(*)
     REAL (KIND=nag_wp) X(N), C(NCNLN), CJAC(NROWJ,N), USER(*)
If NCNLN = 0 , then the name of the dummy routine E04VDM/E54VDM may need to be changed to E04UDM in the calling program.
The parameters NCTOTL, EPSAF, FEALIN and ORTHOG are no longer required. Values for ITMAX, MSGLVL, BIGBND, ETA, FTOL, COLD and FEATOL may be supplied by calling an option setting routine.
E04UCF/E04UCA contains two additional parameters as follows:
The minimum value of the parameter LIWORK must be increased from 3 × N + NCLIN + NCNLN  to 3 × N + NCLIN + 2 × NCNLN . The minimum value of the parameter LWORK may also need to be changed. See the routine documents for further information.

E04VDF

Withdrawn at Mark 17.
Replaced by E04UCF/E04UCA.
Old: IFAIL = 110
     CALL E04VDF(ITMAX,MSGLVL,N,NCLIN,NCNLN,NCTOTL,NROWA,NROWJ,     &
                 CTOL,FTOL,A,BL,BU,CONFUN,OBJFUN,X,ISTATE,C,CJAC,   &
                 CJAC,OBJF,OBJGRD,CLAMDA,IWORK,LIWORK,WORK,LWORK,   &
                 IFAIL)
New: IFAIL = -1
     CALL E04UCF(N,NCLIN,NCNLN,NROWA,NROWJ,N,A,BL,BU,CONFUN,OBJFUN, &
                 ITER,ISTATE,C,CJAC,CLAMDA,OBJF,OBJGRD,R,X,IWORK,   &
                 LIWORK,WORK,LWORK,IUSER,USER,IFAIL)
The specification of the subroutine OBJFUN must also be changed as follows:
Old: SUBROUTINE         OBJFUN(MODE,N,X,OBJF,OBJGRD,NSTATE)
     INTEGER            MODE, N, NSTATE
     REAL (KIND=nag_wp) X(N), OBJF, OBJGRD(N)
New: SUBROUTINE         OBJFUN(MODE,N,X,OBJF,OBJGRD,NSTATE,IUSER,USER)
     INTEGER            MODE, N, NSTATE, IUSER(*)
     REAL (KIND=nag_wp) X(N), OBJF, OBJGRD(N), USER(*)
If NCNLN > 0 , the specification of the subroutine CONFUN must also be changed as follows:
Old: SUBROUTINE         CONFUN(MODE,NCNLN,N,NROWJ,X,C,CJAC,NSTATE)
     INTEGER            MODE, NCNLN, N, NROWJ, NSTATE
     REAL (KIND=nag_wp) X(N), C(NROWJ), CJAC(NROWJ,N)
New: SUBROUTINE         CONFUN(MODE,NCNLN,N,NROWJ,NEEDC,X,C,CJAC,NSTATE,      &
                        IUSER,USER)
     INTEGER            MODE, NCNLN, N, NROWJ, NEEDC(NCNLN), NSTATE, IUSER(*)
     REAL (KIND=nag_wp) X(N), C(NCNLN), CJAC(NROWJ,N), USER(*)
If NCNLN = 0 , then the name of the dummy routine E04VDM/E54VDM may need to be changed to E04UDM in the calling program.
The parameter NCTOTL is no longer required. Values for ITMAX, MSGLVL, CTOL and FTOL may be supplied by calling an option setting routine.
E04UCF/E04UCA contains four additional parameters as follows:
The minimum value of the parameter LIWORK must be increased from 3 × N + NCLIN + NCNLN  to 3 × N + NCLIN + 2 × NCNLN . The minimum value of the parameter LWORK may also need to be changed. See the routine documents for further information.

E04ZCF/E04ZCA

Withdrawn at Mark 24.
There is no replacement for this routine.

F01 – Matrix Operations, Including Inversion

F01AAF

Withdrawn at Mark 17.
Replaced by F07ADF (DGETRF) and F07AJF (DGETRI).
Old: CALL F01AAF(A,IA,N,X,IX,WKSPCE,IFAIL)
New: CALL DGETRF(N,N,A,IA,IPIV,INFO)
     CALL F06QFF('General',N,N,A,IA,X,IX)
     CALL DGETRI(N,X,IX,IPIV,WKSPCE,LWORK,INFO)
where IPIV is an integer vector of length N, and the integer LWORK is the length of array WKSPCE, which must be at least max1,N . In the replacement calls, F07ADF (DGETRF) computes the LU  factorization of the matrix A , F06QFF copies the factorization from A to X, and F07AJF (DGETRI) overwrites X by the inverse of A . If the original matrix A  is no longer required, the call to F06QFF is not necessary, and references to X and IX in the call of F07AJF (DGETRI) may be replaced by references to A and IA, in which case A will be overwritten by the inverse.

F01AEF

Withdrawn at Mark 18.
Replaced by F07FDF (DPOTRF), F08SEF (DSYGST) and F06EGF (DSWAP).
Old: CALL F01AEF(N,A,IA,B,IB,DL,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = J, N
           A(I,J) = A(J,I)
           B(I,J) = B(J,I)
  10 CONTINUE
        DL(J) = B(J,J)
  20 CONTINUE
     CALL DPOTRF('L',N,B,IB,INFO)
     IF (INFO.EQ.0) THEN
        CALL DSYGST(1,'L',N,A,IA,B,IB,INFO)
     ELSE
        IFAIL = 1
     END IF
     CALL DSWAP(N,DL,1,B,IB+1)
INFO is set to a positive value if the matrix B  is not positive definite. It is essential to test IFAIL.

F01AFF

Withdrawn at Mark 18.
Replaced by F06EGF (DSWAP) and F06YJF (DTRSM).
Old: CALL F01AFF(N,M1,M2,B,IB,DL,Z,IZ)
New: CALL DSWAP(N,DL,1,B,IB+1)
     CALL DTRSM('L','L','T','N',N,M2-M1+1,1.0D0,B,IB,Z(1,M1),IZ)
     CALL DSWAP(N,DL,1,B,IB+1)

F01AGF

Withdrawn at Mark 18.
Replaced by F08FEF (DSYTRD).
Old: CALL F01AGF(N,TOL,A,IA,D,E,E2)
New: CALL DSYTRD('L',N,A,IA,D,E(2),TAU,WORK,LWORK,INFO)
     E(1) = 0.0D0
     DO 10 I = 1, N
        E2(I) = E(I)*E(I)
  10 CONTINUE
where TAU is a real array of length at least N-1 , WORK is a real array of length at least (1) and LWORK is its actual length.
Note that the tridiagonal matrix computed by F08FEF (DSYTRD) is different from that computed by F01AGF, but it has the same eigenvalues.

F01AHF

Withdrawn at Mark 18.
Replaced by F08FGF (DORMTR).
The following replacement is valid only if the previous call to F01AGF has been replaced by a call to F08FEF (DSYTRD) as shown above.
Old: CALL F01AHF(N,M1,M2,A,IA,E,Z,IZ)
New: CALL DORMTR('L','L','N',N,M2-M1+1,A,IA,TAU,Z(1,M1),IZ,WORK, &
                 LWORK,INFO)
where WORK is a real array of length at least M2-M1+1 , and LWORK is its actual length.

F01AJF

Withdrawn at Mark 18.
Replaced by F08FEF (DSYTRD) and F08FFF (DORGTR).
Old: CALL F01AJF(N,TOL,A,IA,D,E,Z,IZ)
New: CALL DSYTRD('L',N,A,IA,D,E(2),TAU,WORK,LWORK,INFO)
     E(1) = 0.0D0
     CALL F06QFF('L',N,N,A,IA,Z,IZ)
     CALL DORGTR('L',N,Z,IZ,TAU,WORK,LWORK,INFO)
where TAU is a real array of length at least N-1 , WORK is a real array of length at least N-1  and LWORK is its actual length.
Note that the tridiagonal matrix T  and the orthogonal matrix Q  computed by F08FEF (DSYTRD) and F08FFF (DORGTR) are different from those computed by F01AJF, but they satisfy the same relation QTAQ=T .

F01AKF

Withdrawn at Mark 18.
Replaced by F08NEF (DGEHRD).
Old: CALL F01AKF(N,K,L,A,IA,INTGER)
New: CALL DGEHRD(N,K,L,A,IA,TAU,WORK,LWORK,INFO)
where TAU is a real array of length at least N-1 , WORK is a real array of length at least N  and LWORK is its actual length.
Note that the Hessenberg matrix computed by F08NEF (DGEHRD) is different from that computed by F01AKF, because F08NEF (DGEHRD) uses orthogonal transformations, whereas F01AKF uses stabilized elementary transformations.

F01ALF

Withdrawn at Mark 18.
Replaced by F08NGF (DORMHR).
The following replacement is valid only if the previous call to F01AKF has been replaced by a call to F08NEF (DGEHRD) as indicated above.
Old: CALL F01ALF(K,L,IR,A,IA,INTGER,Z,IZ,N)
New: CALL DORMHR('L','N',N,IR,K,L,A,IA,TAU,Z,IZ,WORK,LWORK,INFO)
where WORK is a real array of length at least IR  and LWORK is its actual length.

F01AMF

Withdrawn at Mark 18.
Replaced by F08NSF (ZGEHRD).
Old: CALL F01AMF(N,K,L,AR,IAR,AI,IAI,INTGER)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZGEHRD(N,K,L,A,IA,TAU,WORK,LWORK,INFO)
where A is a complex array of dimension IA,N , TAU is a complex array of length at least N-1 , WORK is a complex array of length at least N  and LWORK is its actual length.
Note that the Hessenberg matrix computed by F08NSF (ZGEHRD) is different from that computed by F01AMF, because F08NSF (ZGEHRD) uses orthogonal transformations, whereas F01AMF uses stabilized elementary transformations.

F01ANF

Withdrawn at Mark 18.
Replaced by F08NUF (ZUNMHR).
The following replacement is valid only if the previous call to F01AMF has been replaced by a call to F08NSF (ZGEHRD) as indicated above.
Old: CALL F01ANF(K,L,IR,AR,IAR,AI,IAI,INTGER,ZR,IZR,ZI,IZI,N)
New: CALL ZUNMHR('L','N',N,IR,K,L,A,IA,TAU,Z,IZ,WORK,LWORK,INFO)
     DO 20 J = 1, IR
        DO 10 I = 1, N
           ZR(I,J) = REAL(Z(I,J))
           ZI(I,J) = AIMAG(Z(I,J))
  10    CONTINUE
  20 CONTINUE
where A is a complex array of dimension IA,N , TAU is a complex array of length at least N-1 , Z is a complex array of dimension IZ,IR , WORK is a complex array of length at least IR  and LWORK is its actual length.

F01APF

Withdrawn at Mark 18.
Replaced by F06QFF and F08NFF (DORGHR).
The following replacement is valid only if the previous call to F01AKF has been replaced by a call to F08NEF (DGEHRD) as indicated above.
Old: CALL F01APF(N,K,L,INTGER,H,IH,V,IV)
New: CALL F06QFF('L',N,N,H,IH,V,IV)
     CALL DORGHR(N,K,L,V,IV,TAU,WORK,LWORK,INFO)
where WORK is a real array of length at least N , and LWORK is its actual length.
Note that the orthogonal matrix formed by F08NFF (DORGHR) is not the same as the non-orthogonal matrix formed by F01APF. See F01AKF above.

F01ATF

Withdrawn at Mark 18.
Replaced by F08NHF (DGEBAL).
Old: CALL F01ATF(N,IB,A,IA,K,L,D)
New: CALL DGEBAL('B',N,A,IA,K,L,D,INFO)
Note that the balanced matrix returned by F08NHF (DGEBAL) may be different from that returned by F01ATF.

F01AUF

Withdrawn at Mark 18.
Replaced by F08NJF (DGEBAK).
Old: CALL F01AUF(N,K,L,M,D,Z,IZ)
New: CALL DGEBAK('B','R',N,K,L,D,M,Z,IZ,INFO)

F01AVF

Withdrawn at Mark 18.
Replaced by F08NVF (ZGEBAL).
Old: CALL F01AVF(N,IB,AR,IAR,AI,IAI,K,L,D)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZGEBAL('B',N,A,IA,K,L,D,INFO)
     DO 20 J = 1, N
        DO 10 I = 1, N
           AR(I,J) = REAL(A(I,J))
           AI(I,J) = AIMAG(A(I,J))
  10    CONTINUE
  20 CONTINUE
where A is a complex array of dimension IA,N .
Note that the balanced matrix returned by F08NVF (ZGEBAL) may be different from that returned by F01AVF.

F01AWF

Withdrawn at Mark 18.
Replaced by F08NWF (ZGEBAK).
Old: CALL F01AWF(N,K,L,M,D,ZR,IZR,ZI,IZI)
New: DO 20 J = 1, M
        DO 10 I = 1, N
           Z(I,J) = CMPLX(ZR(I,J),ZI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZGEBAK('B','R',N,K,L,D,M,Z,IZ,INFO)
     DO 40 J = 1, M
        DO 30 I = 1, N
           ZR(I,J) = REAL(Z(I,J))
           ZI(I,J) = AIMAG(Z(I,J))
  30    CONTINUE
  40 CONTINUE
where Z is a complex array of dimension IZ,M .

F01AXF

Withdrawn at Mark 18.
Replaced by F06EFF (DCOPY) and F08BEF (DGEQPF).
Old: CALL F01AXF(M,N,QR,IQR,ALPHA,IPIV,Y,E,IFAIL)
New: CALL DGEQPF(M,N,QR,IQR,IPIV,Y,WORK,INFO)
     CALL DCOPY(N,QR,IQR+1,ALPHA,1)
where WORK is a real array of length at least 3×N .
Note that the details of the Householder matrices returned by F08BEF (DGEQPF) are different from those returned by F01AXF, but they determine the same orthogonal matrix Q .

F01AYF

Withdrawn at Mark 18.
Replaced by F08GEF (DSPTRD).
Old: CALL F01AYF(N,TOL,A,IA,D,E,E2)
New: CALL DSPTRD('U',N,A,D,E(2),TAU,INFO)
     E(1) = 0.0D0
     DO 10 I = 1, N
        E2(I) = E(I)*E(I)
  10 CONTINUE
where TAU is a real array of length at least N-1 .

F01AZF

Withdrawn at Mark 18.
Replaced by F08GGF (DOPMTR).
The following replacement is valid only if the previous call to F01AYF has been replaced by a call to F08GEF (DSPTRD) as shown above.
Old: CALL F01AZF(N,M1,M2,A,IA,Z,IZ)
New: CALL DOPMTR('L','U','N',N,M2-M1+1,A,TAU,Z(1,M1),IZ,WORK,INFO)
where WORK is a real array of length at least M2-M1+1 .

F01BCF

Withdrawn at Mark 18.
Replaced by F08FSF (ZHETRD) and F08FTF (ZUNGTR).
Old: CALL F01BCF(N,TOL,AR,IAR,AI,IAI,D,E,WK1,WK2)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZHETRD('L',N,A,IA,D,E(2),TAU,WORK,LWORK,INFO)
     E(1) = 0.0D0
     CALL ZUNGTR('L',N,A,IA,TAU,WORK,LWORK,INFO)
     DO 40 J = 1, N
        DO 30 I = 1, N
           AR(I,J) = REAL(A(I,J))
           AI(I,J) = AIMAG(A(I,J))
  30    CONTINUE
  40 CONTINUE
where A is a complex array of dimension IA,N , TAU is a complex array of length at least N-1 , WORK is a complex array of length at least N-1 , and LWORK is its actual length.
Note that the tridiagonal matrix T  and the unitary matrix Q  computed by F08FSF (ZHETRD) and F08FTF (ZUNGTR) are different from those computed by F01BCF, but they satisfy the same relation QHAQ=T .

F01BDF

Withdrawn at Mark 18.
Replaced by F07FDF (DPOTRF), F08SEF (DSYGST) and F06EGF (DSWAP).
Old: CALL F01BDF(N,A,IA,B,IB,DL,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = J, N
           A(I,J) = A(J,I)
           B(I,J) = B(J,I)
  10    CONTINUE
        DL(J) = B(J,J)
  20 CONTINUE
     CALL DPOTRF('L',N,B,IB,INFO)
     IF (INFO.EQ.0) THEN
        CALL DSYGST(2,'L',N,A,IA,B,IB,INFO)
     ELSE
        IFAIL = 1
     END IF
     CALL DSWAP(N,DL,1,B,IB+1)
IFAIL is set to 1 if the matrix B is not positive definite. It is essential to test IFAIL.

F01BEF

Withdrawn at Mark 18.
Replaced by F06YFF (DTRMM) and F06EGF (DSWAP).
Old: CALL F01BEF(N,M1,M2,B,IB,DL,V,IV)
New: CALL DSWAP(N,DL,1,B,IB+1)
     CALL DTRMM('L','L','N','N',N,M2-M1+1,1.0D0,B,IB,V(1,M1),IV)
     CALL DSWAP(N,DL,1,B,IB+1)

F01BNF

Withdrawn at Mark 17.
Replaced by F07FRF (ZPOTRF).
Old: CALL F01BNF(N,A,IA,P,IFAIL)
New: CALL ZPOTRF('Upper',N,A,IA,INFO)
where, before the call, array A contains the upper triangle of the matrix to be factorized rather than the lower triangle (note that the elements of the upper triangle are the complex conjugates of the elements of the lower triangle). The real array P is no longer required; the upper triangle of A is overwritten by the upper triangular factor U , including the diagonal elements (which are not reciprocated).

F01BPF

Withdrawn at Mark 17.
Replaced by F07FRF (ZPOTRF) and F07FWF (ZPOTRI).
Old: CALL F01BPF(N,A,IA,V,IFAIL)
New: CALL ZPOTRF('Upper',N,A,IA,INFO)
     CALL ZPOTRI('Upper',N,A,IA,INFO)
where, before the calls, the upper triangle of the matrix to be inverted must be contained in rows 1 to N of A, rather than the lower triangle being in rows 2 to N+1  (note that the elements of the upper triangle are the complex conjugates of the elements of the lower triangle). The workspace vector V is no longer required.

F01BTF

Withdrawn at Mark 18.
Replaced by F07ADF (DGETRF).
Old: CALL F01BTF(N,A,IA,P,DP,IFAIL)
New: CALL DGETRF(N,N,A,IA,IPIV,INFO)
where IPIV is an integer array of length N which holds the indices of the pivot elements, and the array P is no longer required. It may be important to note that after a call of F07ADF (DGETRF), A is overwritten by the upper triangular factor U  and the off-diagonal elements of the unit lower triangular factor L , whereas the factorization returned by F01BTF gives U  the unit diagonal. The permutation determinant DP returned by F01BTF is not computed by F07ADF (DGETRF). If this value is required, it may be calculated after a call of F07ADF (DGETRF) by code similar to the following:
   DP = 1.0D0
   DO 10 I = 1, N
      IF (I.NE.IPIV(I)) DP = -DP
10 CONTINUE

F01BWF

Withdrawn at Mark 18.
Replaced by F08HEF (DSBTRD).
Old: CALL F01BWF(N,M1,A,IA,D,E)
New: CALL DSBTRD('N','U',N,M1-1,A,IA,D,E(2),Q,1,WORK,INFO)
     E(1) = 0.0D0
where Q is a dummy real array of length (1) (not used in this call), and WORK is a real array of length at least N .
Note that the tridiagonal matrix computed by F08HEF (DSBTRD) is different from that computed by F01BWF, but it has the same eigenvalues.

F01BXF

Withdrawn at Mark 17.
Replaced by F07FDF (DPOTRF).
Old: CALL F01BXF(N,A,IA,P,IFAIL)
New: CALL DPOTRF('Upper',N,A,IA,INFO)
where, before the call, array A contains the upper triangle of the matrix to be factorized rather than the lower triangle. The array P is no longer required; the upper triangle of A is overwritten by the upper triangular factor U , including the diagonal elements (which are not reciprocated).

F01LBF

Withdrawn at Mark 18.
Replaced by F07BDF (DGBTRF).
Old: CALL F01LBF(N,M1,M2,A,IA,AL,IL,IN,IV,IFAIL)
New: CALL DGBTRF(N,N,M1,M2,A,IA,IN,INFO)
where the size of array A must now have a leading dimension IA of at least 2×M1+M2+1 . The array AL, its associated dimension parameter IL, and the parameter IV are not required for F07BDF (DGBTRF) because this routine overwrites A by both the L  and U  factors. The scheme by which the matrix is packed into the array is completely different from that used by F01LBF; the relevant routine document should be consulted for details.

F01MAF

Withdrawn at Mark 19.
Replaced by F11JAF.
Existing programs should be modified to call F11JAF. The interfaces are significantly different and therefore precise details of a replacement call cannot be given. Please consult the appropriate routine document.

F01NAF

Withdrawn at Mark 17.
Replaced by F07BRF (ZGBTRF).
Old: CALL F01NAF(N,ML,MU,A,NRA,TOL,IN,SCALE,IFAIL)
New: CALL ZGBTRF(N,N,ML,MU,A,NRA,IN,INFO)
where the parameter TOL and array SCALE are no longer required. The input matrix must be stored using the same scheme as for F01NAF, except in rows ML + 1  to 2 × ML + MU + 1  of A instead of rows 1 to ML + MU + 1 . In F07BRF (ZGBTRF), the value returned in INN  has no significance as an indicator of near-singularity of the matrix.

F01QCF

Withdrawn at Mark 18.
Replaced by F08AEF (DGEQRF).
Old: CALL F01QCF(M,N,A,LDA,ZETA,IFAIL)
New: CALL DGEQRF(M,N,A,LDA,ZETA,WORK,LWORK,INFO)
where WORK is a real array of length at least N, and LWORK is its actual length.
The subdiagonal elements of A and the elements of ZETA returned by F08AEF (DGEQRF) are not the same as those returned by F01QCF. Subsequent calls to F01QDF or F01QEF must also be replaced by calls to F08AFF (DORGQR) or F08AGF (DORMQR) as shown below.

F01QDF

Withdrawn at Mark 18.
Replaced by F08AGF (DORMQR).
The following replacement is valid only if the previous call to F01QCF has been replaced by a call to F08AEF (DGEQRF) as shown below or if the previous call to F01QFF has been replaced by a call to F08BEF (DGEQPF) as shown below. It also assumes that the second argument of F01QDF is set to WHERET='S', which is appropriate if the contents of A and ZETA have not been changed after the call of F01QCF.
Old: CALL F01QDF(TRANS,'S',M,N,A,LDA,ZETA,NCOLB,B,LDB,WORK,IFAIL)
New: CALL DORMQR('L',TRANS,M,NCOLB,N,A,LDA,ZETA,B,LDB,WORK,LWORK,INFO)
where LWORK is the actual length of WORK.

F01QEF

Withdrawn at Mark 18.
Replaced by F08AFF (DORGQR).
The following replacement is valid only if the previous call to F01QCF has been replaced by a call to F08AEF (DGEQRF) as shown above or if the previous call to F01QFF has been replaced by a call to F08BEF (DGEQPF) as shown below. It also assumes that the first argument of F01QEF is set to WHERET='S', which is appropriate if the contents of A and ZETA have not been changed after the call of F01QCF.
Old: CALL F01QEF('S',M,N,NCOLQ,A,LDA,ZETA,WORK,IFAIL)
New: CALL DORGQR(M,NCOLQ,N,A,LDA,ZETA,WORK,LWORK,INFO)
where LWORK is the actual length of WORK.

F01QFF

Withdrawn at Mark 18.
Replaced by F08BEF (DGEQPF).
The following replacement assumes that the first argument of F01QFF (PIVOT) is 'C'. There is no direct replacement if PIVOT =  'S'.
Old: CALL F01QFF('C',M,N,A,LDA,ZETA,PERM,WORK,IFAIL)
New: DO 10 I = 1, N
        PERM(I) = 0
  10 CONTINUE
     CALL DGEQPF(M,N,A,LDA,PERM,ZETA,WORK,INFO)
where WORK is a real array of length at least 3×N  (F01QFF only requires WORK to be of length 2×N ).
The subdiagonal elements of A and the elements of ZETA returned by F08BEF (DGEQPF) are not the same as those returned by F01QFF. Subsequent calls to F01QDF or F01QEF must also be replaced by calls to F08AGF (DORMQR) or F08AFF (DORGQR) as shown above. Note also that the array PERM returned by F08BEF (DGEQPF) holds details of the interchanges in a different form than that returned by F01QFF.

F01RCF

Withdrawn at Mark 18.
Replaced by F08ASF (ZGEQRF).
The subdiagonal elements of A and the elements of THETA returned by F08ASF (ZGEQRF) are not the same as those returned by F01RCF. Subsequent calls to F01RDF or F01REF must also be replaced by calls to F08AUF (ZUNMQR) or F08ATF (ZUNGQR) as shown below.
Old: CALL F01RCF(M,N,A,LDA,THETA,IFAIL)
New: CALL ZGEQRF(M,N,A,LDA,THETA,WORK,LWORK,INFO)
where WORK is a complex array of length at least N , and LWORK is its actual length.

F01RDF

Withdrawn at Mark 18.
Replaced by F08AUF (ZUNMQR).
The following replacement is valid only if the previous call to F01RCF has been replaced by a call to F08ASF (ZGEQRF) as shown below or if the previous call to F01RFF has been replaced by a call to F08BSF (ZGEQPF) as shown below. It also assumes that the second argument of F01RDF is set to WHERET='S', which is appropriate if the contents of A and THETA have not been changed after the call of F01RCF.
Old: CALL F01RDF(TRANS,'S',M,N,A,LDA,THETA,NCOLB,B,LDB,WORK,IFAIL)
New: CALL ZUNMQR('L',TRANS,M,NCOLB,N,A,LDA,THETA,B,LDB,WORK,LWORK, &
                 INFO)
where LWORK is the actual length of WORK.

F01REF

Withdrawn at Mark 18.
Replaced by F08ATF (ZUNGQR).
The following replacement is valid only if the previous call to F01RCF has been replaced by a call to F08ASF (ZGEQRF) as shown below or if the previous call to F01RFF has been replaced by a call to F08BSF (ZGEQPF) as shown below. It also assumes that the first argument of F01REF is set to WHERET='S', which is appropriate if the contents of A and THETA have not been changed after the call of F01RCF.
Old: CALL F01REF('S',M,N,NCOLQ,A,LDA,THETA,WORK,IFAIL)
New: CALL ZUNGQR(M,NCOLQ,N,A,LDA,THETA,WORK,LWORK,INFO)
where LWORK is the actual length of WORK.

F01RFF

Withdrawn at Mark 18.
Replaced by F08BSF (ZGEQPF).
The following replacement assumes that the first argument of F01RFF (PIVOT) is 'C'. There is no direct replacement if PIVOT='S'.
Old: CALL F01RFF('C',M,N,A,LDA,THETA,PERM,WORK,IFAIL)
New: DO 10 I = 1, N
        PERM(I) = 0
  10 CONTINUE
     CALL ZGEQPF(M,N,A,LDA,PERM,THETA,CWORK,WORK,INFO)
where CWORK is a complex array of length at least N .
The subdiagonal elements of A and the elements of THETA returned by F08BSF (ZGEQPF) are not the same as those returned by F01RFF. Subsequent calls to F01RDF or F01REF must also be replaced by calls to F08AUF (ZUNMQR) or F08ATF (ZUNGQR) as shown above. Note also that the array PERM returned by F08BSF (ZGEQPF) holds details of the interchanges in a different form than that returned by F01RFF.

F02 – Eigenvalues and Eigenvectors

F02AAF

Withdrawn at Mark 18.
Replaced by F08FAF (DSYEV).
Old: CALL F02AAF(A,IA,N,R,E,IFAIL)
New: CALL DSYEV('N','L',N,A,IA,R,WORK,LWORK,INFO)
     IF (INFO.NE.0) THEN
       ...
where WORK is a real array of length at least 3×N  and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance.

F02ABF

Withdrawn at Mark 18.
Replaced by F08FAF (DSYEV).
Old: CALL F02ABF(A,IA,N,R,V,IV,E,IFAIL)
New: CALL F06QFF('L',N,N,A,IA,V,IV)
     CALL DSYEV('V','L',N,V,IV,R,WORK,LWORK,INFO)
     IF (INFO.NE.0) THEN
       ...
where WORK is a real array of length at least 3×N and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance. If F02ABF was called with the same array supplied for V and A, then the call to F06QFF may be omitted.

F02ADF

Withdrawn at Mark 18.
Replaced by F08SAF (DSYGV).
Old: CALL F02ADF(A,IA,B,IB,N,R,DE,IFAIL)
New: CALL DSYGV(1,'N','U',N,A,IA,B,IB,R,WORK,LWORK,INFO)
     IF (INFO.NE.0) THEN
       ...
where WORK is a real array of length at least 3×N and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance.
Note that the call to F08SAF (DSYGV) will overwrite the upper triangles of the arrays A and B and leave the subdiagonal elements unchanged, whereas the call to F02ADF overwrites the lower triangle and leaves the elements above the diagonal unchanged.

F02AEF

Withdrawn at Mark 18.
Replaced by F08SAF (DSYGV).
Old: CALL F02AEF(A,IA,B,IB,N,R,V,IV,DL,E,IFAIL)
New: CALL F06QFF('U',N,N,A,IA,V,IV)
     CALL DSYGV(1,'V','U',N,V,IV,B,IB,R,WORK,LWORK,INFO)
     IF (INFO.NE.0) THEN
       ...
where WORK is a real array of length at least 3×N and LWORK is its actual length.
Note that the call to F08SAF (DSYGV) will overwrite the upper triangle of the array B and leave the subdiagonal elements unchanged, whereas the call to F02AEF overwrites the lower triangle and leaves the elements above the diagonal unchanged. The call to F06QFF copies A to V, so A is left unchanged. If F02AEF was called with the same array supplied for V and A, then the call to F06QFF may be omitted.

F02AFF

Withdrawn at Mark 18.
Replaced by F08NAF (DGEEV).
Old: CALL F02AFF(A,IA,N,RR,RI,INTGER,IFAIL)
New: CALL DGEEV('N','N',N,A,IA,RR,RI,VR,1,VI,1, &
                 WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
     ....
where VR and VI are real arrays of length (1) (not used in this call), WORK is a real array of length at least 4×N and LWORK is its actual length; the iteration counts (returned by F02AFF in the array INTGER) are not available from F08NAF (DGEEV). Larger values of LWORK, up to some optimal value, may improve performance.

F02AGF

Withdrawn at Mark 18.
Replaced by F08NAF (DGEEV).
Old:   CALL F02AGF(A,IA,N,RR,RI,VR,IVR,VI,IVI,INTGER,IFAIL)
New:   CALL DGEEV(('N','V',N,A,IA,RR,RI,VL,LDVL,VR1,LDVR1, &
                  WORK,LWORK,INFO)
       IF (INFO.EQ.0) THEN
!      Eigenvector information is stored differently in VR1
!      VR(j)=VR1(j) if RI(j) = 0.0
!      VR(j)=VR1(j) and VI(j)=VR1(j+1) and
!      VR(j+1)=VR1(j) and VI(j+1) = - VR1(j+1) if RI(j)/= (not equals) 0 and
!      RI(j) = -RI(j+1)
       ....
where WORK is a real array of length at least 4×N and LWORK is its actual length; the iteration counts (returned by F02AGF in the array INTGER) are not available from F08NAF (DGEEV). Larger values of LWORK, up to some optimal value, may improve performance.

F02AJF

Withdrawn at Mark 18.
Replaced by F08NNF (ZGEEV).
Old: CALL F02AJF(AR,IAR,AI,IAI,N,RR,RI,INTGER,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZGEEV('N','N',N,A,LDA,R,VL,1,VR,1,WORK, &
                 LWORK,RWORK,INFO)
     IF (INFO.EQ.0) THEN
        DO 30 I = 1, N
           RR(I) = REAL(R(I))
           RI(I) = AIMAG(R(I))
  30    CONTINUE
        ....
where A is a complex array of dimension LDA,N, LDA must be at least max1,N, R is a complex array of dimension (N), VR and VL are dummy complex array of length (1) (not used in this call), RWORK is a real array of length at least 2×N, WORK is a complex array of length at least 2×N and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance. The iteration counts (returned by F02AJF in the array INTGER) are not available from F08NNF (ZGEEV).

F02AKF

Withdrawn at Mark 18.
Replaced by F08NNF (ZGEEV).
Old: CALL F02AKF(AR,IAR,AI,IAI,N,RR,RI,VR,IVR,VI,IVI,INTGER,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZGEEV('N','V',N,A,LDA,R,VL,LDVL,VR1,LDVR,   &
                 WORK,LWORK,RWORK,INFO)
     IF (INFO.EQ.0) THEN
        DO 40 J = 1, N
           RR(J) = REAL(R(J))
           RI(J) = AIMAG(R(J))
           DO 30 I = 1, N
              VR(I,J) = REAL(VR1(I,J))
              VI(I,J) = AIMAG(VR1(I,J))
  30       CONTINUE
  40    CONTINUE
     ....
where A is a complex array of dimension LDA,N, LDA is at least max1,N, R is a complex array of length (N), VL is a complex array of dimension (1,1), LDVL is 1, VR1 is a complex array of dimension LDVR,N, LDVR is at least max1,N, RWORK is a real array of length at least 2×N, WORK is a complex array of length at least 2×N and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance. The iteration counts (returned by F02AKF in the array INTGER) are not available from F08NNF (ZGEEV).

F02AMF

Withdrawn at Mark 18.
Replaced by F08JEF (DSTEQR).
Old: CALL F02AMF(N,EPS,D,E,V,IV,IFAIL)
New: CALL DSTEQR('V',N,D,E(2),V,IV,WORK,INFO)
where WORK is a real array of length at least 2 × N-1 .

F02ANF

Withdrawn at Mark 18.
Replaced by F08PSF (ZHSEQR).
Old: CALL F02ANF(N,EPS,HR,IHR,HI,IHI,RR,RI,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           H(I,J) = CMPLX(HR(I,J),HI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZHSEQR('E','N',N,1,N,H,IH,R,Z,1,WORK,1,INFO)
     DO 30 I = 1, N
        RR(I) = REAL(R(I))
        RI(I) = AIMAG(R(I))
  30 CONTINUE
where H is a complex array of dimension IH,N , R is a complex array of length (N), Z is a dummy complex array of length (1) (not used in this call), and WORK is a complex array of length at least N .

F02APF

Withdrawn at Mark 18.
Replaced by F08PEF (DHSEQR).
Old: CALL F02APF(N,EPS,H,IH,RR,RI,ICNT,IFAIL)
New: CALL DHSEQR('E','N',N,1,N,H,IH,RR,RI,Z,1,WORK,1,INFO)
where Z is a dummy real array of length (1) (not used in this call), and WORK is a real array of length at least 3×N ; the iteration counts (returned by F02APF in the array ICNT) are not available from F08PEF (DHSEQR).

F02AQF

Withdrawn at Mark 18.
Replaced by F08PEF (DHSEQR) and F08QKF (DTREVC).
Old: CALL F02AQF(N,K,L,EPS,H,IH,V,IV,RR,RI,INTGER,IFAIL)
New: CALL DHSEQR('S','V',N,K,L,H,IH,RR,RI,V,IV,WORK,1,INFO)
     CALL DTREVC('R','O',SELECT,N,H,IH,V,IV,V,IV,N,M,WORK,INFO)
where SELECT is a dummy logical array of length (1) (not used in this call), and WORK is a real array of length at least 3×N ; the iteration counts (returned by F02AQF in the array INTGER) are not available from F08PEF (DHSEQR); M is an integer which is set to N by F08QKF (DTREVC).

F02ARF

Withdrawn at Mark 18.
Replaced by F08PSF (ZHSEQR) and F08QXF (ZTREVC).
Old: CALL F02ARF(N,K,L,EPS,INTGER,HR,IHR,HI,IHI,RR,RI,VR,IVR,VI,     &
                 IVI, IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           H(I,J) = CMPLX(HR(I,J),HI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZHSEQR('S','V',N,K,L,H,IH,R,V,IV,WORK,1,INFO)
     CALL ZTREVC('R','O',SELECT,N,H,IH,V,IV,V,IV,N,M,WORK,RWORK,INFO)
     DO 40 J = 1, N
        RR(J) = REAL(R(J))
        RI(J) = AIMAG(R(J))
        DO 30 I = 1, N
           VR(I,J) = REAL(V(I,J))
           VI(I,J) = AIMAG(V(I,J))
  30    CONTINUE
  40 CONTINUE
where H is a complex array of dimension IH,N , R is a complex array of length (N), V is a complex array of dimension IV,N , WORK is a complex array of length at least 2×N  and RWORK is a real array of length at least N ; M is an integer which is set to N by F08QXF (ZTREVC).
If F02ARF was preceded by a call to F01AMF to reduce a full complex matrix to Hessenberg form, then the call to F01AMF must also be replaced by calls to F08NSF (ZGEHRD) and F08NTF (ZUNGHR). IH must be max1,N and IV must be max1,N.

F02AVF

Withdrawn at Mark 18.
Replaced by F08JFF (DSTERF).
Old: CALL F02AVF(N,EPS,D,E,IFAIL)
New: CALL DSTERF(N,D,E(2),INFO)

F02AWF

Withdrawn at Mark 18.
Replaced by F08FNF (ZHEEV).
Old: CALL F02AWF(AR,IAR,AI,IAI,N,R,WK1,WK2,WK3,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZHEEV('N','L',N,A,LDA,R,WORK,LWORK,RWORK,INFO)
     IF (INFO.EQ.0) THEN
        ...
where A is a complex array of dimension LDA,N, LDA is at least max1,N RWORK is a real array of length at least max1,3×N-2, WORK is a complex array of length at least 2×N and LWORK is its actual length. Larger values of LWORK, up to some optimal value, may improve performance.

F02AXF

Withdrawn at Mark 18.
Replaced by F08FNF (ZHEEV).
Old: CALL F02AXF(AR,IAR,AI,IAI,N,R,VR,IVR,VI,IVI,WK1,WK2,WK3,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL F06TFF('L',N,N,A,LDA,V,LDV)
     CALL ZHEEV('V','L',N,V,LDV,R,WORK,LWORK,RWORK,INFO)
     IF (INFO.EQ.0) THEN
        DO 40 J = 1, N
           DO 30 I = 1, N
              VR(I,J) = REAL(V(I,J))
              VI(I,J) = AIMAG(V(I,J))
  30       CONTINUE
  40    CONTINUE
     ...
where A is a complex array of dimension LDA,N , LDA is at least max(1,N), V is a complex array of dimension LDV,N , LDV is at least max1,N, RWORK is a real array of length at least max1,3×N-2, WORK is a complex array of length at least 2×N  and LWORK is its actual length. If F02AXF was called with the same arrays supplied for VR and AR and for VI and AI, then the call to F06TFF may be omitted.

F02AYF

Withdrawn at Mark 18.
Replaced by F08JSF (ZSTEQR).
Old: CALL F02AYF(N,EPS,D,E,VR,IVR,VI,IVI,IFAIL)
New: CALL ZSTEQR('V',N,D,E(2),V,IV,WORK,INFO)
     DO 40 J = 1, N
        DO 30 I = 1, N
           VR(I,J) = REAL(V(I,J))
           VI(I,J) = AIMAG(V(I,J))
  30    CONTINUE
  40 CONTINUE
where V is a complex array of dimension IV,N , and WORK is a real array of length at least 2 × N-1 .

F02BBF

Withdrawn at Mark 19.
Replaced by F08FBF (DSYEVX).
Old:  CALL F02BBF(A,LDA,N,RLB,RUB,M,MM,R,V,LDV,D,E,E2,X,G,C,  &
                  ICOUNT,IFAIL)
New:  CALL DSYEVX('V','V','L',N,A,LDA,RLB,RUB,   &
                  0,0,2*X02AMF(),MM,R,V,LDV,WORK,LWORK,IWORK, &
                  JFAIL,INFO)
where R must have dimension at least max1,N, WORK is a real array of length at least 4×N, LWORK is its actual length, JFAIL is an integer array of length at least max1,N, and IWORK is an integer array of length at least 5×N. Note that in the call to F02BBF R needs only to be of dimension (M). Larger values of LWORK, up to some optimal value, may improve performance. Arguments C, ICOUNT, X, G, E2, E and D are not used.

F02BCF

Withdrawn at Mark 19.
Replaced by F02ECF.
Old: CALL F02BCF(A,IA,N,ALB,UB,M,MM,RR,RI,VR,IVR,VI,IVI,   &
                 INTGER,ICNT,C,B,IB,U,V,IFAIL)
New: CALL F02ECF('Moduli',N,A,IA,ALB,UB,M,MM,RR,RI,VR,IVR, &
                 VI,IVI,WORK,LWORK,ICNT,C,IFAIL)
where WORK is a real array of length at least (N×N+4) and LWORK is its actual length.

F02BDF

Withdrawn at Mark 19.
Replaced by F02GCF.
Old: CALL F02BDF(AR,IAR,AI,IAI,N,ALB,UB,M,MM,RR,RI,VR,IVR,  &
                 VI,IVI,INTGER,C,BR,IBR,BI,IBI,U,V,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = 1, N
           A(I,J) = CMPLX(AR(I,J),AI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL F02GCF('Moduli',N,A,IA,ALB,UB,M,MM,R,V,IV,WORK,   &
                 LWORK,RWORK,INTGER,C,IFAIL)
     DO 30 I = 1, N
        RR(I) = REAL(R(I))
        RI(I) = AIMAG(R(I))
  30 CONTINUE
     DO 50 J = 1, MM
        DO 40 I = 1, N
           VR(I,J) = REAL(V(I,J))
           VI(I,J) = AIMAG(V(I,J))
  40    CONTINUE
  50 CONTINUE
where A is a complex array of dimension IA,N , R is a complex array of dimension (N), V is a complex array of dimension IV,M , WORK is a complex array of length at least N × N+2 , LWORK is its actual length, and RWORK is a real array of length at least 2×N .

F02BEF

Withdrawn at Mark 18.
Replaced by F08JJF (DSTEBZ) and F08JKF (DSTEIN).
Old: CALL F02BEF(N,D,ALB,UB,EPS,EPS1,E,E2,M,MM,R,V,IV,ICOUNT,X,C,     &
                 IFAIL)
New: CALL DSTEBZ('V','B',N,ALB,UB,0,0,EPS1,D,E(2),MM,NSPLIT,R,IBLOCK, &
               ISPLIT,X,IWORK,INFO)
     CALL DSTEIN(N,D,E(2),MM,R,IBLOCK,ISPLIT,V,IV,X,IWORK,IFAILV,INFO)
where NSPLIT is an integer variable, IBLOCK, ISPLIT and IFAILV are integer arrays of length at least N , and IWORK is an integer array of length at least 3×N .

F02BFF

Withdrawn at Mark 18.
Replaced by F08JJF (DSTEBZ).
Old: CALL F02BFF(D,E,E2,N,M1,M2,MM12,EPS1,EPS,EPS2,IZ,R,WU)
New: CALL DSTEBZ('I','E',N,0.0D0,0.0D0,M1,M2,EPS1,D,E(2),M, &
                 NSPLIT,R,IBLOCK,ISPLIT,WORK,IWORK,INFO)
where M and NSPLIT are integer variables, IBLOCK and ISPLIT are integer arrays of length at least N , WORK is a real array of length at least 4×N , and IWORK is an integer array of length at least 3×N .

F02BJF

Withdrawn at Mark 23.
Replaced by F08WAF (DGGEV).
Old: CALL F02BJF(N,A,LDA,B,LDB,EPS1,ALFR,ALFI,BETA,MATV,V,LDV,ITER,IFAIL)
New: IF (MATV) THEN
       JOBVR = 'V'
     ELSE
       JOBVR = 'N'
     ENDIF
     CALL DGGEV('N',JOBVR,N,A,LDA,B,LDB,ALFR,ALFI,BETA,VL,LDVL,           &
                 VR,LDVL,WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
       ...

F02BKF

Withdrawn at Mark 18.
Replaced by F08PKF (DHSEIN).
Old: CALL F02BKF(N,M,H,IH,RI,C,RR,V,IV,B,IB,U,W,IFAIL)
New: CALL DHSEIN('R','Q','N',C,N,H,IH,RR,RI,V,IV,V,IV,M,M2,B,IFAILR, &
                 IFAILR,INFO)
where M2 is an integer variable, and IFAILR is an integer array of length at least N .
Note that the array C may be modified by F08PKF (DHSEIN) if there are complex conjugate pairs of eigenvalues.

F02BLF

Withdrawn at Mark 18.
Replaced by F08PXF (ZHSEIN).
Old: CALL F02BLF(N,M,HR,IHR,HI,IHI,RI,C,RR,VR,IVR,VI,IVI,BR,IBR,BI, &
                 IBI,U,W,IFAIL)
New: DO 20 J = 1, N
        R(J) = CMPLX(RR(J),RI(J),KIND=nag_wp)
        DO 10 I = 1, N
           H(I,J) = CMPLX(HR(I,J),HI(I,J),KIND=nag_wp)
  10    CONTINUE
  20 CONTINUE
     CALL ZHSEIN('R','Q','N',C,N,H,IH,R,V,IV,V,IV,M,M2,WORK,RWORK,  &
                 IFAILR,IFAILR,INFO)
     DO 30 I = 1, N
        RR(I) = REAL(R(I))
  30 CONTINUE
     DO 50 J = 1, M
        DO 40 I = 1, N
           VR(I,J) = REAL(V(I,J))
           VI(I,J) = AIMAG(V(I,J))
  40    CONTINUE
  50 CONTINUE
where H is a complex array of dimension IH,N , R is a complex array of length (N), V is a complex , array of dimension IV,M , M2 is an integer variable, WORK is a complex array of length at least (N×N), RWORK is a real array of length at least N , and IFAILR is an integer array of length at least N .

F02EAF

Withdrawn at Mark 23.
Replaced by F08PAF (DGEES).
Old: CALL F02EAF(JOB,N,A,LDA,WR,WI,Z,LDZ,WORK,LWORK,IFAIL)
New: LOGICAL SELECT
     EXTERNAL SELECT
     ...
     IF (JOB.EQ.'N') THEN
       JOBVS = 'N'
     ELSE
       JOBVS = 'V'
     END IF
     CALL DGEES(JOBVS,'N',SELECT,N,A,LDA,0,WR,WI,Z,LDZ,WORK, &
                 LWORK,BWORK,INFO)
     IF (INFO.EQ.0) THEN
        ....
     LOGICAL FUNCTION SELECT(AR,AI)
     REAL (KIND=nag_wp) :: AR, AI
     SELECT = .TRUE.
     RETURN
     ENDK

F02EBF

Withdrawn at Mark 23.
Replaced by F08NAF (DGEEV).
Old: CALL F02EBF(JOB,N,A,LDA,WR,WI,VR,LDVR,VI,LDVI,WORK,LWORK, &
                 IFAIL)
New: IF (JOB.EQ.'N') THEN
        JOBVR = 'N'
     ELSE
        JOBVR = 'V'
     END IF
     CALL DGEEV('N',JOBVR,N,A,LDA,WR,WI,VL,LDVL,VR1,LDVR1,     &
                 WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
!       Eigenvector information is stored differently.
!       For complex conjugate pairs (that is, corresponding
!       to the j-th eigenvector such that WI(j) is nonzero,
!       and WI(j) = -WI(j+1)), the real and imaginary parts
!       of the first of the pair of eigenvectors are stored 
!       as consecutive columns of VR1: VR1(:,j), VR1(:,j+1).
!       The second in the pair is just the conjugate of the
!       first, so can be constructed by negating the 
!       elements in VR1(:,j+1).
!       If the j-th eigenvector is real (WI(j)=0), the 
!       corresponding real eigenvector is stored in the
!       j-th column of VR1, VR1(1:N,j).

F02FAF

Withdrawn at Mark 23.
Replaced by F08FAF (DSYEV).
Old: CALL F02FAF(JOB,UPLO,N,A,LDA,W,WORK,LWORK,IFAIL)
New: CALL DSYEV(JOB,UPLO,N,A,LDA,W,WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
       ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02FCF

Withdrawn at Mark 23.
Replaced by F08FBF (DSYEVX).
Old: CALL F02FCF(JOB,RANGE,UPLO,N,A,LDA,WL,WU,IL,IU,MEST,M,   &
                 W,Z,LDZ,WORK,LWORK,IWORK,IFAIL)
New: CALL DSYEVX(JOB,RANGE,UPLO,N,A,LDA,WL,WU,IL,IU,ABSTOL,M, &
                 W,Z,LDZ,WORK,LWORK,IWORK,JFAIL,INFO)
     IF (INFO.EQ.0) THEN
       ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02FDF

Withdrawn at Mark 23.
Replaced by F08SAF (DSYGV).
Old: CALL F02FDF(ITYPE,JOB,UPLO,N,A,LDA,B,LDB,W,WORK,LWORK,IFAIL)
New: CALL DSYGV(ITYPE,JOB,UPLO,N,A,LDA,B,LDB,W,WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
       ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02FHF

Withdrawn at Mark 23.
Replaced by F08UAF (DSBGV).
Old:  CALL F02FHF(N,MA,A,LDA,MB,B,LDB,D,WORK,LWORK,IFAIL)
New:  CALL DSBGV('N','U',N,MA,MB,A,LDA,B,LDB,D,Z,LDZ,WORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
The order of eigenvalues in D changes from descending to ascending.
The minimum workspace requirement has changed to become LWORK=3×N

F02GAF

Withdrawn at Mark 23.
Replaced by F08PNF (ZGEES).
Old: CALL F02GAF(JOB,N,A,LDA,W,Z,LDZ,RWORK,WORK,LWORK,IFAIL)
New: LOGICAL BWORK(1)
     LOGICAL SELECT
     EXTERNAL SELECT
        ...
     IF (JOB.EQ.'N') THEN
        JOBVS = 'N'
     ELSE
        JOBVS = 'V'
     END IF
     CALL ZGEES(JOBVS,'N',SELECT,N,A,LDA,0,W,Z,LDZ,          &
                 WORK,LWORK,RWORK,BWORK,INFO)
     IF (INFO.NE.0) THEN
       ...
     LOGICAL FUNCTION SELECT(C)
     COMPLEX*16 C
     SELECT = .TRUE.
     RETURN
     END
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02GBF

Withdrawn at Mark 23.
Replaced by F08NNF (ZGEEV).
Old: CALL F02GBF(JOB,N,A,LDA,W,V,LDV,RWORK,WORK,LWORK,IFAIL)
New: CALL ZGEEV('N',JOB,N,A,LDA,W,VL,LDVL,V,LDV,             &
                 WORK,LWORK,RWORK,INFO)
     IF (INFO.EQ.0) THEN
       ...

F02GJF

Withdrawn at Mark 23.
Replaced by F08WNF (ZGGEV).
Old:  CALL F02GJF(N,AR,LDAR,AI,LDAI,BR,LDBR,BI,LDBI,EPS1,ALFR,  &
                  ALFI,BETA,MATV,VR,LDVR,VI,LDVI,ITER,IFAIL)
New:  IF (MATV) THEN
         JOBVR = 'V'
      ELSE
         JOBVR = 'N'
      END IF

!     Set A=AR + iAI and B = BR+iBI

      CALL ZGGEV('N',JOBVR,N,A,LDA,B,LDB,ALPHA,BETA1,VL,LDVL,   &
                  V,LDV,WORK,LWORK,RWORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
Note that the separated real and imaginary parts of input and output data in F02GJF has been replaced by combined complex types in F08WNF (ZGGEV).

F02HAF

Withdrawn at Mark 23.
Replaced by F08FNF (ZHEEV).
Old:  CALL F02HAF(JOB,UPLO,N,A,LDA,W,RWORK,WORK,LWORK,IFAIL)
New:  CALL ZHEEV(JOB,UPLO,N,A,LDA,W,WORK,LWORK,RWORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02HCF

Withdrawn at Mark 23.
Replaced by F08FPF (ZHEEVX).
Old:  CALL F02HCF(JOB,RANGE,UPLO,N,A,LDA,WL,WU,IL,IU,MEST,M,   &
                  W,Z,LDZ,WORK,LWORK,RWORK,IWORK,IFAIL)
New:  CALL ZHEEVX(JOB,RANGE,UPLO,N,A,LDA,WL,WU,IL,IU,ABSTOL,M, &
                  W,Z,LDZ,WORK,LWORK,RWORK,IWORK,JFAIL,INFO)
      IF (INFO.EQ.0) THEN
         ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02HDF

Withdrawn at Mark 23.
Replaced by F08SNF (ZHEGV).
Old:  CALL F02HDF(ITYPE,JOB,UPLO,N,A,LDA,B,LDB,W,RWORK,WORK, &
                  LWORK,IFAIL)
New:  CALL ZHEGV(ITYPE,JOB,UPLO,N,A,LDA,B,LDB,W,WORK,LWORK,  &
                  RWORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F02SWF

Withdrawn at Mark 18.
Replaced by F08KEF (DGEBRD).
The following replacement ignores the triangular structure of A, and therefore references the subdiagonal elements of A; however on many machines the replacement code will be more efficient.
Old: CALL F02SWF(N,A,LDA,D,E,NCOLY,Y,LDY,WANTQ,Q,LDQ,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = J+1, N
           A(I,J) = 0.0D0
  10    CONTINUE
  20 CONTINUE
     CALL DGEBRD(N,N,A,LDA,D,E,TAUQ,TAUP,WORK,LWORK,INFO)
     IF (WANTQ) THEN
        CALL F06QFF('L',N,N,A,LDA,Q,LDQ)
        CALL DORGBR('Q',N,N,N,Q,LDQ,TAUQ,WORK,LWORK,INFO)
     END IF
     IF (NCOLY.GT.0) THEN
        CALL DORMBR('Q','L','T',N,NCOLY,N,A,LDA,TAUQ,Y,LDY, &
                   WORK,LWORK,INFO)
     END IF
where TAUQ, TAUP and WORK are real arrays of length at least N , and LWORK is the actual length of WORK.

F02SXF

Withdrawn at Mark 18.
Replaced by F08KFF (DORGBR) and F08KGF (DORMBR).
The following replacement is valid only if the previous call to F02SWF has been replaced by a call to F08KEF (DGEBRD) as shown above.
Old: CALL F02SXF(N,A,LDA,NCOLY,Y,LDY,WORK,IFAIL)
New: IF (NCOLY.EQ.0) THEN
        CALL DORGBR('P',N,N,N,A,LDA,TAUP,WORK,LWORK,INFO)
     ELSE
        CALL DORMBR('P','L','T',N,NCOLY,N,A,LDA,TAUP,Y,LDY,WORK, &
                   LWORK,INFO)
     END IF

F02SYF

Withdrawn at Mark 18.
Replaced by F08MEF (DBDSQR).
Old: CALL F02SYF(N,D,E,NCOLB,B,LDB,NROWY,Y,LDY,NCOLZ,Z,LDZ,WORK,     &
                 IFAIL)
New: CALL DBDSQR('U',N,NCOLZ,NROWY,NCOLB,D,E,Z,LDZ,Y,LDY,B,LDB,WORK, &
                 INFO)
where WORK is a real array of length at least 4 × N-1  unless NCOLB = NROWY = NCOLZ = 0 .

F02UWF

Withdrawn at Mark 18.
Replaced by F08KSF (ZGEBRD), F06TFF, F08KTF (ZUNGBR) and F08KUF (ZUNMBR).
The following replacement ignores the triangular structure of A, and therefore references the subdiagonal elements of A; however on many machines the replacement code will be more efficient.
Old: CALL F02UWF(N,A,LDA,D,E,NCOLY,Y,LDY,WANTQ,Q,LDQ,WORK,IFAIL)
New: DO 20 J = 1, N
        DO 10 I = J+1, N
           A(I,J) = 0.0D0
  10    CONTINUE
  20 CONTINUE
     CALL ZGEBRD(N,N,A,LDA,D,E,TAUQ,TAUP,WORK,LWORK,INFO)
     IF (WANTQ) THEN
        CALL F06TFF('L',N,N,A,LDA,Q,LDQ)
        CALL ZUNGBR('Q',N,N,N,Q,LDQ,TAUQ,WORK,LWORK,INFO)
     END IF
     IF (NCOLY.GT.0) THEN
        CALL ZUNMBR('Q','L','C',N,NCOLY,N,A,LDA,TAUQ,Y,LDY,     &
                   WORK,LWORK,INFO)
     END IF
where TAUQ and TAUP are complex arrays of length at least N , and LWORK is the actual length of WORK.

F02UXF

Withdrawn at Mark 18.
Replaced by F08KTF (ZUNGBR) or F08KUF (ZUNMBR).
The following replacement is valid only if the previous call to F02UWF has been replaced by a call to F08KSF (ZGEBRD) as shown above.
Old: CALL F02UXF(N,A,LDA,NCOLY,Y,LDY,RWORK,CWORK,IFAIL)
New: IF (NCOLY.EQ.0) THEN
        CALL ZUNGBR('P',N,N,N,A,LDA,TAUP,CWORK,LWORK,INFO)
     ELSE
        CALL ZUNMBR('P','L','C',N,NCOLY,N,A,LDA,TAUP,Y,LDY,CWORK, &
                   LWORK,INFO)
     END IF
where LWORK is the actual length of CWORK.

F02UYF

Withdrawn at Mark 18.
Replaced by F08MSF (ZBDSQR).
Old: CALL F02UYF(N,D,E,NCOLB,B,LDB,NROWY,Y,LDY,NCOLZ,Z,LDZ,WORK,
                 IFAIL)                                              &
New: CALL ZBDSQR('U',N,NCOLZ,NROWY,NCOLB,D,E,Z,LDZ,Y,LDY,B,LDB,WORK, &
                 INFO)
where WORK is a real array of length at least 4 × N-1  unless NCOLB = NROWY = NCOLZ = 0 .

F02WEF

Withdrawn at Mark 23.
Replaced by F08KBF (DGESVD).
Old:  CALL F02WEF(M,N,A,LDA,NCOLB,B,LDB,WANTQ,Q,LDQ,SV,WANTP,       &
                  PT,LDPT,WORK,IFAIL)
New:  IF (WANTQ) THEN
         JOBU = 'A'
      ELSE
         JOBU = 'N'
      END IF
      IF (WANTP) THEN
         JOBVT = 'A'
      ELSE
         JOBVT = 'N'
      END IF
      LWORK = -1
      CALL DGESVD(JOBU,JOBVT,M,N,A,LDA,SV,Q,LDQ,PT,LDPT,WORK,LWORK,INFO)
      LWORK = ANINT(WORK(1))
      ALLOCATE (W(LWORK))

      CALL DGESVD(JOBU,JOBVT,M,N,A,LDA,SV,Q,LDQ,PT,LDPT,W,LWORK,INFO)

      DEALLOCATE (W)
WORK must be a one-dimensional real array of length at least lwork given by: max1, 3× minM,N + maxM,N , 5× minM,N  
Larger values of LWORK, up to some optimal value, may improve performance.
Please note that the facility to return QTB is not provided so arguments WANTB and B are not required. Instead, F08KBF (DGESVD) has an option to return the entire M*M orthogonal matrix Q, referred to as U in its documentation, through its 8th argument.

F02XEF

Withdrawn at Mark 23.
Replaced by F08KPF (ZGESVD).
Old:  CALL F02XEF(M,N,A,LDA,NCOLB,B,LDB,WANTQ,Q,LDQ,SV,WANTP,        &
                  PH,LDPH,RWORK,CWORK,IFAIL)
New:  IF (WANTQ) THEN
         JOBU = 'A'
      ELSE
         JOBU = 'N'
      END IF
      IF (WANTP) THEN
         JOBVT = 'A'
      ELSE
         JOBVT = 'N'
      END IF
      LWORK = -1
      CALL ZGESVD(JOBU,JOBVT,M,N,A,LDA,SV,Q,LDQ,PT,LDPT,WORK,        &
                  LWORK,RWORK,INFO)
      LWORK = ANINT(WORK(1))
      ALLOCATE (W(LWORK))

      CALL ZGESVD(JOBU,JOBVT,M,N,A,LDA,SV,Q,LDQ,PT,LDPT,W,           &
                  LWORK,RWORK,INFO)

      DEALLOCATE (W)
WORK must be a one-dimensional complex array of length at least lwork given by max1, 2× minM,N + maxM,N  
RWORK must be a one-dimensional real array of length max1, 5× minM,N  
Larger values of LWORK, up to some optimal value, may improve performance.
Please note that the facility to return QHB is not provided so arguments WANTB and B are not required. Instead, F08KPF (ZGESVD) has an option to return the entire M*M unitary matrix Q, referred to as U in its documentation, through its 8th argument.

F03 – Determinants

F03AAF

Scheduled for withdrawal at Mark 25.
Replaced by F07ADF (DGETRF) and F03BAF.
Old: IFAIL = 0
     CALL F03AAF(A,LDA,N,DET,WKSPCE,IFAIL)
New: INTEGER IPIV(N)
     ...

     CALL DGETRF(N,N,A,LDA,IPIV,INFO)
     IFAIL = 0
     CALL F03BAF(N,A,LDA,IPIV,D,ID,IFAIL)
     DET = D*2**ID
Note: the real array WKSPCE has been replaced by the integer array IPIV for holding the pivots of the factorization.

F03ABF

Scheduled for withdrawal at Mark 25.
Replaced by F07FDF (DPOTRF) and F03BFF.
Old: IFAIL = 0
     CALL F03ABF(A,LDA,N,DET,WKSPCE,IFAIL)
New: CALL DPOTRF('U',N,A,LDA,INFO)
     IFAIL = 0
     CALL F03BFF(N,A,LDA,D,ID,IFAIL)
     DET = D*2**ID
Note: the real array WKSPCE is no longer required. Also the upper triangular part of A, stored in A, has been replaced here by its Cholesky factorization; the lower triangular part of A can be used and overwritten by replacing 'U' by 'L' in the call to DPOTRF above.

F03ACF

Scheduled for withdrawal at Mark 25.
Replaced by F07HDF (DPBTRF) and F03BHF.
Old: IFAIL = 0
     CALL F03ACF(A,LDA,N,M,DET,RL,LDRL,M1,IFAIL)
New: CALL DPBTRF('L',N,M,AB,LDAB,INFO)
     IFAIL = 0
     CALL F03BHF(UPLO,N,KD,AB,LDAB,D,ID,IFAIL)
     DET = D*2**ID
Note: the storage of A in arrays A and AB is different. In fact ABij=Aji, for i=1,2,,m and j=max1,i-m,,,i which conforms to the LAPACK banded storage scheme. The factorization is returned in AB rather than in a separate array (RL). The upper part of matrix A can also be stored in AB on input to DPBTRF.

F03ADF

Scheduled for withdrawal at Mark 25.
Replaced by F07ARF (ZGETRF) and F03BNF.
Old: IFAIL = 0
     CALL F03ADF(A,LDA,N,DETR,DETI,WKSPCE,IFAIL)
New: INTEGER IPIV(N)
     ...
     CALL ZGETRF(N,N,A,LDA,IPIV,INFO)
     IFAIL = 0
     CALL F03BNF(N,A,LDA,IPIV,D,ID,IFAIL)
     DETR = REAL(D)*2**ID(1)
     DETI = AIMAG(D)*2**ID(2)
Note: the real array WKSPCE has been replaced by the integer array IPIV for holding the pivots of the factorization. The real and imaginary parts of the determinant are independently scaled.

F03AEF

Scheduled for withdrawal at Mark 25.
Replaced by F07FDF (DPOTRF) and F03BFF.
Old: IFAIL = 0
     CALL F03AEF(N,A,LDA,P,D1,ID,IFAIL)
New: CALL DPOTRF('U',N,A,LDA,INFO)
     IFAIL = 0
     CALL F03BFF(N,A,LDA,D1,ID,IFAIL)
Note: the upper triangular part of A, stored in A, has been replaced here by its Cholesky factorization; the lower triangular part of A can be used and overwritten by replacing UPLO='U' by UPLO='L' in the call to F07FDF (DPOTRF) above.

F03AFF

Scheduled for withdrawal at Mark 25.
Replaced by F07ADF (DGETRF) and F03BAF.
Old: IFAIL = 0
     CALL F03AFF(N,EPS,A,LDA,D1,ID,P,IFAIL)
New: INTEGER IPIV(N)
     ...
     CALL DGETRF(N,N,A,LDA,IPIV,INFO)
     IFAIL = 0
     CALL F03BAF(N,A,LDA,IPIV,D1,ID,IFAIL)
Note: real array P has been replaced by the integer array IPIV for holding the pivots of the factorization.

F03AGF

Withdrawn at Mark 17.
Replaced by F07HDF (DPBTRF).
Old: CALL F03AGF(N,M,A,IA,RL,IL,M1,D1,ID,IFAIL)
New: CALL DPBTRF('Lower',N,M,A,IA,INFO)
where the array RL and its associated dimension parameter IL, and the parameters M1, D1 and ID are no longer required. In F07HDF (DPBTRF), the array A holds the matrix packed using a different scheme to that used by F03AGF; see the routine document for details. F07HDF (DPBTRF) overwrites A with the Cholesky factor L  (without reciprocating diagonal elements) rather than returning L  in the array RL. F07HDF (DPBTRF) does not compute the determinant of the input matrix, returned as D1×2.0ID  by F03AGF. If this is required, it may be calculated after the call of F07HDF (DPBTRF) by code similar to the following. The code computes the determinant by multiplying the diagonal elements of the factor L , taking care to avoid possible overflow or underflow.
   D1 = 1.0_nag_wp
   ID = 0
   DO 30 I = 1, N
      D1 = D1*A(1,I)**2
10    IF (D1.GE.1.0_nag_wp) THEN
         D1 = D1*0.0625_nag_wp
         ID = ID + 4.0
         GO TO 10
      END IF
20    IF (D1.LT.0.0625_nag_wp) THEN
         D1 = D1*16.0_nag_wp
         ID = ID - 4.0
         GO TO 20
      END IF
30 CONTINUE

F03AHF

Withdrawn at Mark 17.
Replaced by F07ARF (ZGETRF).
Old: CALL F03AHF(N,A,IA,DETR,DETI,ID,RINT,IFAIL)
New: CALL ZGETRF(N,N,A,IA,IPIV,INFO)
where IPIV is an integer array of length N which holds the indices of the pivot elements, and the array RINT is no longer required. It may be important to note that after a call of F07ARF (ZGETRF), A is overwritten by the upper triangular factor U  and the off-diagonal elements of the unit lower triangular factor L , whereas the factorization returned by F03AHF gives U  the unit diagonal. F07ARF (ZGETRF) does not compute the determinant of the input matrix, returned as CMPLX(DETR,DETI,KIND=nag_wp) ×2.0ID  by F03AHF. If this is required, it may be calculated after a call of F07ARF (ZGETRF) by code similar to the following, where DET is a complex variable. The code computes the determinant by multiplying the diagonal elements of the factor U , taking care to avoid possible overflow or underflow.
   DET = CMPLX(1.0_nag_wp,KIND=nag_wp)
   ID = 0
   DO 30 I = 1, N
      IF (IPIV(I).NE.I) DET = -DET
      DET = DET*A(I,I)
10    IF (MAX(ABS(REAL(DET)),ABS(AIMAG(DET))).GE.1.0_nag_wp) THEN
         DET = DET*0.062_nag_wp
         ID = ID + 4
         GO TO 10
      END IF
20    IF (MAX(ABS(REAL(DET)),ABS(AIMAG(DET))).LT.0.0625_nag_wp) THEN
         DET = DET*16.0_nag_wp
         ID = ID - 4
         GO TO 20
      END IF
30 CONTINUE
   DETR = REAL(DET)
   DETI = AIMAG(DET)

F03AMF

Withdrawn at Mark 17.
There is no replacement for this routine.
Old: CALL F01BNF(N,A,IA,P,IFAIL)
     CALL F03AMF(N,TEN,P,D1,D2)
New: CALL ZPOTRF('Upper',N,A,IA,INFO)
     D1 = 1.0_nag_wp
     D2 = 0.0_nag_wp
     DO 30 I = 1, N
        D1 = D1*REAL(A(I,I))**2
  10    IF (D1.GE.1.0_nag_wp) THEN
           D1 = D1*0.0625_nag_wp
           D2 = D2 + 4.0_nag_wp
           GO TO 10
        END IF
  20    IF (D1.LT.0.0625_nag_wp) THEN
           D1 = D1*16.0_nag_wp
           D2 = D2 - 4.0_nag_wp
           GO TO 20
        END IF
  30 CONTINUE
     IF (TEN) THEN
        I = D2
        D2 = D2*LOG10(2.0_nag_wp)
        D1 = D1*2.0_nag_wp**(I-D2/LOG10(2.0_nag_wp))
     END IF
F03AMF computes the determinant of a Hermitian positive definite matrix after factorization by F01BNF, and has no replacement routine. F01BNF has been superseded by F07FRF (ZPOTRF). To compute the determinant of such a matrix, in the same form as that returned by F03AMF, code similar to the above may be used. The code computes the determinant by multiplying the (real) diagonal elements of the factor U , taking care to avoid possible overflow or underflow.
Note that before the call of F07FRF (ZPOTRF), array A contains the upper triangle of the matrix rather than the lower triangle.

F04 – Simultaneous Linear Equations

F04AAF

Withdrawn at Mark 23.
Replaced by F07AAF (DGESV).
Old: CALL F04AAF(A,LDA,B,LDB,N,M,C,LDC,WKSPCE,IFAIL)
New: CALL DGESV(N,M,A,LDA,IPIV,B,LDB,INFO)
     IF (INFO.EQ.0) THEN
!       Answer now in B
        ...

F04ACF

Withdrawn at Mark 23.
Replaced by F07HAF (DPBSV).
Old:  CALL F04ACF(A,LDA,B,LDB,N,M,IR,C,LDC,RL,LDRL,M1,IFAIL)
New:  CALL DPBSV('U',N,M,IR,AB,LDAB,B,LDB,INFO)
      IF (INFO.EQ.0) THEN
!        A and AB are stored differently.
!        AB may be regarded as the transpose of A, with the 'U' option.
!        Thus LDAB might be M+1
!        Answer now in B
         ...

F04ADF

Withdrawn at Mark 23.
Replaced by F07ANF (ZGESV).
Old:  CALL F04ADF(A,LDA,B,LDB,N,M,C,LDC,WKSPCE,IFAIL)
New:  CALL ZGESV(N,M,A,LDA,IPIV,B,LDB,INFO)
      IF (INFO.EQ.0) THEN
!        Answer now in B
         ...

F04AFF

Scheduled for withdrawal at Mark 25.
There is no replacement for this routine.
The factorization and solution of a positive definite linear system can be handled by calls to routines from Chapter F07, e.g., F07FBF (DPOSVX).
For example:
Old: IFAIL = 0
     CALL F03AEF(N,A,LDA,P,D1,ID,IFAIL)
     CALL F04AFF(N,NRHS,A,LDA,P,B,LDB,EPS,X,LDX,BB,LDBB,K,IFAIL)
New: CALL DPOSVX('equil','upper',N,NRHS,A,LDA,AF,LDAF,'Yes',P,B, &
                 LDB,X,LDX,RCOND,FERR,BERR,WORK,IWORK,INFO)
     IFAIL = 0
     CALL F03BFF(N,A,LDA,D1,ID,IFAIL)

F04AGF

Scheduled for withdrawal at Mark 25.
There is no replacement for this routine.
The factorization and solution of a positive definite linear system can be handled by calls to routines from Chapter F07, e.g., F07FAF (DPOSV).
For example:
Old: IFAIL = 0
     CALL F03AEF(N,A,LDA,P,D1,ID,IFAIL)
     CALL F04AGF(N,NRHS,A,LDA,P,B,LDB,X,LDX)
New: CALL DPOSV('upper',N,NRHS,A,LDA,B,LDB,INFO)
     IFAIL = 0
     CALL F03BFF(N,A,LDA,D1,ID,IFAIL)

F04AHF

Scheduled for withdrawal at Mark 25.
There is no replacement for this routine.
The factorization and solution of a real general linear system can be handled by calls to routines from the Chapter F07, e.g., F07ABF (DGESVX).
For example:
Old: IFAIL = 0
     CALL F03AFF(N,EPS,A,LDA,D1,ID,P,IFAIL)
     CALL F04AHF(N,NRHS,A,LDA,AA,LDAA,P,B,LDB,EPS,X,LDX,BB,    &
                 LDBB,K,IFAIL)
New: CALL DGESVX('Equil','No trans',N,NRHS,A,LDA,AA,LDAA,IPIV, &
                 'Yes',R,C,B,LDB,X,LDX,RCOND,FERR,BERR,WORK,   &
                 IWORK,INFO)
     IFAIL = 0
     CALL F03BAF(N,A,LDA,IPIV,D1,ID,IFAIL)

F04AJF

Scheduled for withdrawal at Mark 25.
There is no replacement for this routine.
The factorization and solution of a real general linear system can be handled by calls to routines from Chapter F07, e.g., F07AAF (DGESV).
For example:
Old: IFAIL = 0
     CALL F03AFF(N,EPS,A,LDA,D1,ID,P,IFAIL)
     CALL F04AJF(N,NRHS,A,LDA,P,B,LDB)
New: CALL DGESV(N,NRHS,A,LDA,IPIV,B,LDB,INFO)
     IFAIL = 0
     CALL F03BAF(N,A,LDA,IPIV,D1,ID,IFAIL)

F04AKF

Withdrawn at Mark 17.
Replaced by F07ASF (ZGETRS).
Old: CALL F04AKF(N,IR,A,IA,P,B,IB)
New: CALL ZGETRS('No Transpose',N,IR,A,IA,IPIV,B,IB,INFO)

F04ALF

Withdrawn at Mark 17.
Replaced by F07HEF (DPBTRS).
Old: CALL F04ALF(N,M,IR,RL,IRL,M1,B,IB,X,IX)
New: CALL F06QFF('General',N,IR,B,IB,X,IX)
     CALL DPBTRS('Lower',N,M,IR,A,IA,X,IX,INFO)
It is assumed that the matrix has been factorized by a call of F07HDF (DPBTRF) rather than F03AGF. A is the factorized matrix as returned by F07HDF (DPBTRF). The array RL, its associated dimension parameter IRL, and the parameter M1 are no longer required. INFO is an integer diagnostic parameter; see the F07HEF (DPBTRS) routine document for details. If the original right-hand side matrix B is no longer required, the call to F06QFF is not necessary, and references to X and IX in the call of F07HEF (DPBTRS) may be replaced by references to B and IB, in which case B will be overwritten by the solution.

F04ANF

Withdrawn at Mark 18.
Replaced by F06EFF (DCOPY), F06PJF (DTRSV) and F08AGF (DORMQR).
Old: CALL F04ANF(M,N,QR,IQR,ALPHA,IPIV,B,X,Z)
New: CALL DCOPY(N,ALPHA,1,QR,IQR+1)
     CALL DORMQR('L','T',M,1,N,QR,IQR,Y,B,M,Z,N,INFO)
     CALL DTRSV('U','N','N',N,QR,IQR,B,1)
     D0 10 I = 1, N
        X(IPIV(I)) = B(I)
  10 CONTINUE
where Y must be the same real array as was used as the seventh argument in the previous call of F01AXF.
This replacement is valid only if the previous call to F01AXF has been replaced by a call to F08BEF (DGEQPF) as shown above.

F04ARF

Withdrawn at Mark 23.
Replaced by F07AAF (DGESV).
Old:  CALL F04ARF(A,LDA,B,N,C,WKSPCE,IFAIL)
New:  CALL DGESV(N,1,A,LDA,IPIV,B,N,INFO)
      IF (INFO.EQ.0) THEN
!        Answer now in B
         ...

F04AWF

Withdrawn at Mark 17.
Replaced by F07FSF (ZPOTRS).
Old: CALL F04AWF(N,IR,A,IA,P,B,IB,X,IX)
New: CALL F06TFF('General',N,IR,B,IB,X,IX)
     CALL ZPOTRS('Upper',N,IR,A,IA,X,IX,INFO)
It is assumed that the matrix has been factorized by a call of F07FRF (ZPOTRF) rather than F01BNF; see the F01 Chapter Introduction for details. A is the factorized matrix as returned by F07FRF (ZPOTRF). The array P is no longer required. INFO is an integer diagnostic parameter; see the F07FSF (ZPOTRS) routine document for details. If the original right-hand side array B is no longer required, the call to F06TFF is not necessary, and references to B and IX in the call of F07FSF (ZPOTRS) may be replaced by references to B and IB, in which case B will be overwritten by the solution.

F04AYF

Withdrawn at Mark 18.
Replaced by F07AEF (DGETRS).
Old: CALL F04AYF(N,IR,A,IA,P,B,IB,IFAIL)
New: CALL DGETRS('No Transpose',N,IR,A,IA,IPIV,B,IB,INFO)
It is assumed that the matrix has been factorized by a call of F07ADF (DGETRF). IPIV is an integer array of length N, and the array P is no longer required.

F04AZF

Withdrawn at Mark 17.
Replaced by F07FEF (DPOTRS).
Old: CALL F04AZF(N,IR,A,IA,P,B,IB,IFAIL)
New: CALL DPOTRS('Upper',N,IR,A,IA,B,IB,INFO)
It is assumed that the matrix has been factorized by a call of F07FDF (DPOTRF). The array P is no longer required.

F04EAF

Withdrawn at Mark 23.
Replaced by F07CAF (DGTSV).
Old:  CALL F04EAF(N,D,DU,DL,B,IFAIL)
New:  CALL DGTSV(N,1,DL(2),D,DU(2),B,N,INFO)
      IF (INFO.EQ.0) THEN
!        Answer now in B
         ...

F04FAF

Withdrawn at Mark 23.
Replaced by F07JAF (DPTSV), or F07JDF (DPTTRF) and F07JEF (DPTTRS).
Old:  CALL F04FAF(JOB,N,D,E,B,IFAIL)
New:  CALL DPTSV(N,1,D,E(2),B,1,INFO)
         ...

F04JAF

Withdrawn at Mark 23.
Replaced by F08KAF (DGELSS).
Old:  CALL F04JAF(M,N,A,LDA,B,TOL,SIGMA,IRANK,WORK,LWORK,IFAIL)
New:  CALL DGELSS(M,N,1,A,LDA,B,1,S,RCOND,IRANK,WORK,LWORK,INFO)
      IF (INFO.EQ.0) THEN
!        Answer now in B
!        Singular values now in S, not WORK.
!        The standard error is not computed
         ...
The minimum workspace requirement has changed from 4×N to 3 × minN,M + max 2 × minN,M ,maxM,N,1 .

F04JDF

Withdrawn at Mark 23.
Replaced by F08KAF (DGELSS).
Old:  CALL F04JDF(M,N,A,LDA,B,TOL,SIGMA,IRANK,WORK,LWORK,IFAIL)
New:  CALL DGELSS(M,N,1,A,LDA,B,1,S,RCOND,IRANK,WORK,LWORK,INFO)
!     Note workspace requirements are different.
      IF (INFO.EQ.0) THEN
!        Answer now in B
!        Singular values now in S, not WORK.
!        The standard error is not computed
         ...
The minimum workspace requirement has changed from N×M+4 to 3 × minN,M + max 2 × minN,M ,maxM,N,1 .

F04JLF

Withdrawn at Mark 23.
Replaced by F08ZBF (DGGGLM).
Old:  CALL F04JLF(M,N,P,A,LDA,B,LDB,D,X,Y,WORK,LWORK,IFAIL)
New:  CALL DGGGLM(M,N,P,A,LDA,B,LDB,D,X,Y,WORK,LWORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F04JMF

Withdrawn at Mark 23.
Replaced by F08ZAF (DGGLSE).
Old:  CALL F04JMF(M,N,P,A,LDA,B,LDB,C,D,X,WORK,LWORK,IFAIL)
New:  CALL DGGLSE(M,N,P,A,LDA,B,LDB,C,D,X,WORK,LWORK,INFO)
      IF (INFO.EQ.0) THEN
         ...
The minimum workspace requirement has not increased but the requirement for optimal performance might be different. The workspace query mechanism (LWORK=-1) should be used to determine the requirement for optimal performance.

F04KLF

Withdrawn at Mark 23.
Replaced by F08ZPF (ZGGGLM).
Old: CALL F04KLF(M,N,P,A,LDA,B,LDB,D,X,Y,WORK,LWORK,IFAIL)
New: CALL ZGGGLM(M,N,P,A,LDA,B,LDB,D,X,Y,WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
        ...

F04KMF

Withdrawn at Mark 23.
Replaced by F08ZNF (ZGGLSE).
Old: CALL F04KMF(M,N,P,A,LDA,B,LDB,C,D,X,WORK,LWORK,IFAIL)
New: CALL ZGGLSE(M,N,P,A,LDA,B,LDB,C,D,X,WORK,LWORK,INFO)
     IF (INFO.EQ.0) THEN
        ...

F04LDF

Withdrawn at Mark 18.
Replaced by F07BEF (DGBTRS).
Old: CALL F04LDF(N,M1,M2,IR,A,IA,AL,IL,IN,B,IB,IFAIL)
New: CALL DGBTRS('No Transpose',N,M1,M2,IR,A,IA,IN,B,IB,INFO)
It is assumed that the matrix has been factorized by a call of F07BDF (DGBTRF). The array AL and its associated dimension parameter IL are no longer required.

F04MAF

Withdrawn at Mark 19.
Replaced by F11JCF.
Existing programs should be modified to call F11JCF. The interfaces are significantly different and therefore precise details of a replacement call cannot be given. Please consult the appropriate routine document.

F04MBF

Withdrawn at Mark 19.
Replaced by F11GDF, F11GEF and F11GFF (or F11JCF or F11JEF).
If a user-defined preconditioner is required existing programs should be modified to call F11GDF, F11GEF and F11GFF. Otherwise F11JCF or F11JEF may be used. The interfaces for these routines are significantly different from that for F04MBF and therefore precise details of a replacement call cannot be given. Please consult the appropriate routine document.

F04NAF

Withdrawn at Mark 17.
Replaced by F06SKF (ZTBSV) and F07BSF (ZGBTRS).
Old: CALL F04NAF(JOB,N,ML,MU,A,NRA,IN,B,TOL,IFAIL)
New: JOB = ABS(JOB)
     IF (JOB.EQ.1) THEN
        CALL ZGBTRS('No Transpose',N,ML,MU,1,A,NRA,IN,B,N,INFO)
     ELSE IF (JOB.EQ.2) THEN
        CALL ZGBTRS('Conjugate Transpose',N,ML,MU,1,A,NRA,IN,B,N,INFO)
     ELSE IF (JOB.EQ.3) THEN
        CALL ZTBSV('Upper','No Transpose','Non-unit',N,ML+MU,A,NRA,B,1)
     END IF
It is assumed that the matrix has been factorized by a call of F07BRF (ZGBTRF). The replacement routines do not have the functionality to perturb diagonal elements of the triangular factor U , as specified by a negative value of JOB in F04NAF. The parameter TOL is therefore no longer useful. If this functionality is genuinely required, please contact NAG.

F04YCF

Scheduled for withdrawal at Mark 26.
Replaced by F04YDF.
Old: CALL F04YCF(ICASE,N,X,ESTNRM,WORK,IWORK,IFAIL)
New: CALL F04YDF(IREVCM,M,N,X,LDX,Y,LDY,ESTNRM,T,SEED,WORK,IWORK,IFAIL)
F04YDF returns an estimate of the 1-norm of a rectangular M×N matrix, whereas F04YCF only works with square matrices. The real array X, which was previously used to return matrix–vector products to F04YCF, has been replaced with two real arrays XLDX,* and YLDY,* which are used to return matrix-matrix products to F04YDF. Here, LDXN, LDYM and the second dimensions of X and Y are at least of size T, where you can choose parameter T. The sizes of the workspace arrays WORK and IWORK have been increased to M×T and 2×N+5×T+20 respectively. The integer SEED provides a seed for the random number generator used by F04YDF. The integer ICASE has been replaced by IREVCM, which can take the values 0, 1 or 2. See the routine documentation for F04YDF further details about the reverse communication interface.

F04ZCF

Scheduled for withdrawal at Mark 26.
Replaced by F04ZDF.
Old: CALL F04ZCF(ICASE,N,X,ESTNRM,WORK,IWORK,IFAIL)
New: CALL F04ZDF(IREVCM,M,N,X,LDX,Y,LDY,ESTNRM,T,SEED,WORK,RWORK,IWORK,IFAIL)
F04ZDF returns an estimate of the 1norm of a rectangular M×N matrix, whereas F04ZCF only works with square matrices. The complex array X, which was previously used to return matrix–vector products to F04ZCF, has been replaced with two complex arrays XLDX,* and YLDY,* which are used to return matrix-matrix products to F04ZDF. Here, LDXN, LDYM and the second dimensions of X and Y are at least of size T, where you can choose the parameter T. The sizes of the workspace arrays WORK and IWORK have been increased to M×T and 2×N+5×T+20 respectively and there is an additional real workspace array RWORK of size 2×N. The integer SEED provides a seed for the random number generator used by F04ZDF. The integer ICASE has been replaced by IREVCM, which can take the values 0, 1 or 2. See the routine documentation for F04ZDF for further details about the reverse communication interface.

F11 – Large Scale Linear Systems

F11BAF

Withdrawn at Mark 21.
Replaced by F11BDF.
Old: CALL F11BAF(METHOD,PRECON,NORM,WEIGHT,ITERM,N,M,TOL,MAXITN, &
                 ANORM,SIGMAX,MONIT,LWREQ,IFAIL)
New: CALL F11BDF(METHOD,PRECON,NORM,WEIGHT,ITERM,N,M,TOL,MAXITN, &
                 ANORM,SIGMAX,MONIT,WORK,LWORK,LWREQ,IFAIL)
F11BDF contains two additional parameters as follows:
See the routine document for further information.

F11BBF

Withdrawn at Mark 21.
Replaced by F11BEF.
Old: CALL F11BBF(IREVCM,U,V,WORK,LWORK,IFAIL)
New: CALL F11BEF(IREVCM,U,V,WGT,WORK,LWORK,IFAIL)
WGT must be a one-dimensional real array of length at least n  (the order of the matrix) if weights are to be used in the termination criterion, and 1  otherwise. Note that the call to F11BEF requires the weights to be supplied in WGT1:n  rather than WORK1:n . The minimum value of the parameter LWORK may also need to be changed.

F11BCF

Withdrawn at Mark 21.
Replaced by F11BFF.
Old: CALL F11BCF(ITN,STPLHS,STPRHS,ANORM,SIGMAX,IFAIL)
New: CALL F11BFF(ITN,STPLHS,STPRHS,ANORM,SIGMAX,WORK,LWORK,IFAIL)
F11BFF contains two additional parameters as follows:
See the routine document for further information.

F11GAF

Withdrawn at Mark 22.
Replaced by F11GDF.
Old: CALL F11GAF(METHOD,PRECON,SIGCMP,NORM,WEIGHT,ITERM,N,TOL,MAXITN,    &
                 ANORM,SIGMAX,SIGTOL,MAXITS,MONIT,LWREQ,IFAIL)
New: CALL F11GDF(METHOD,PRECON,SIGCMP,NORM,WEIGHT,ITERM,N,TOL,MAXITN,    &
                 ANORM,SIGMAX,SIGTOL,MAXITS,MONIT,LWREQ,WORK,LWORK,IFAIL)
F11GDF contains two additional parameters as follows:
See the routine document for further information.

F11GBF

Withdrawn at Mark 22.
Replaced by F11GEF.
Old: CALL F11GBF(IREVCM,U,V,WORK,LWORK,IFAIL)
New: CALL F11GEF(IREVCM,U,V,WGT,WORK,LWORK,IFAIL)
WGT must be a one-dimensional real array of length at least n  (the order of the matrix) if weights are to be used in the termination criterion, and 1  otherwise. Note that the call to F11GEF requires the weights to be supplied in WGT1:n  rather than WORK1:n . The minimum value of the parameter LWORK may also need to be changed.

F11GCF

Withdrawn at Mark 22.
Replaced by F11GFF.
Old: CALL F11GCF(ITN,STPLHS,STPRHS,ANORM,SIGMAX,ITS,SIGERR,IFAIL)
New: CALL F11GFF(ITN,STPLHS,STPRHS,ANORM,SIGMAX,ITS,SIGERR,       &
                 WORK,LWORK,IFAIL)
F11GFF contains two additional parameters as follows:
See the routine document for further information.

G01 – Simple Calculations on Statistical Data

G01AAF

Scheduled for withdrawal at Mark 26.
Replaced by G01ATF.
Old: 
     CALL G01AAF(N,X,IWT,WT,XMEAN,S2,S3,S4,XMIN,XMAX,WTSUM,IFAIL)
New: 
     PN = 0
     CALL G01ATF(N,X,IWT,PN,XMEAN,S2,S3,S4,XMIN,XMAX,RCOMM,IFAIL)
     IWT = PN
     WTSUM = RCOMM(1)

G01CEF

Withdrawn at Mark 18.
Replaced by G01FAF.
Old: X = G01CEF(P,IFAIL)
New: X = G01FAF('Lower-tail',P,IFAIL)

G04 – Analysis of Variance

G04ADF

Withdrawn at Mark 17.
Replaced by G04BCF.
Old: CALL G04ADF(DATA,VAR,AMR,AMC,AMT,LCODE,IA,N,NN)
New: IFAIL = 0
     CALL G04BCF(1,N,N,DATA,N,IT,GMEAN,AMT,TABL,6,C,NMAX, &
                 IREP,RPMEAN,AMR,AMC,R,EF,0.0,0,WK,IFAIL)
The arrays AMR, AMC and AMT contain the means of the rows, columns and treatments rather than the totals. The values equivalent to those returned in the array VAR of G04ADF are returned in the second column of the two-dimensional array TABL starting at the second row, e.g., VAR1 = TABL2,2 . The two-dimensional integer array LCODE (containing the treatment codes) has been replaced by the one-dimensional array IT. These arrays will be the equivalent if IA=N. The following additional declarations are required.
REAL (KIND=nag_wp) GMEAN
INTEGER            IFAIL
REAL (KIND=nag_wp) C(NMAX,NMAX), EF(NMAX), TABL(6,5), R(NMAX*NMAX), &
                   RPMEAN(1), WK(NMAX*NMAX+NMAX)
INTEGER            IREP(NMAX), IT(NMAX*NMAX)
where NMAX is an integer such that NMAXN .

G04AEF

Withdrawn at Mark 17.
Replaced by G04BBF.
Old: CALL G04AEF(Y,N,K,NOBS,GBAR,GM,SS,IDF,F,FP,IFAIL)
New: CALL G04BBF(N,Y,0,K,IT,GM,BMEAN,GBAR,TABL,4,C,KMAX,NOBS, &
                 R,EF,0.0D0,0,WK,IFAIL)
The values equivalent to those returned by G04AEF in the arrays IDF and SS are returned in the first and second columns of TABL starting at row 2 and the values equivalent to those returned in the scalars F and FP are returned in TABL(2,4) and TABL(2,5) respectively. NOBS is output from G04BBF rather than input. The groups are indicated by the array IT. The following code illustrates how IT can be computed from NOBS.
      IJ = 0
   DO 40 I = 1, K
      DO 20 J = 1, NOBS(I)
         IJ = IJ + 1
         IT(IJ) = I
20    CONTINUE
40 CONTINUE
The following additional declarations are required.
REAL (KIND=nag_wp) BMEAN(1),C(KMAX,KMAX),EF(KMAX),R(NMAX),TABL(4,5), &
                   WK(KMAX*KMAX+KMAX)
INTEGER            IT(NMAX)
NMAX and KMAX are integers such that NMAXN and KMAXK.

G04AFF

Withdrawn at Mark 17.
Replaced by G04CAF.
Old: CALL G04AFF(Y,IY1,IY2,M,NR,NC,ROW,COL,CELL,ICELL,GM,SS,IDF,F,FP, &
                 IFAIL)
New: CALL G04CAF(M*NR*NC,Y1,2,LFAC,1,2,0,6,TABL,ITOTAL,TMEAN,MAXT,E,  &
                 IMEAN,SEMEAN,BMEAN,R,IWK,IFAIL)
Y1 is a one-dimensional array containing the observations in the same order as Y, if IY1 =  M and IY2 =  NR then these are equivalent. LFAC is an integer array such that LFAC1 = NC  and LFAC2 = NR . The following indicates how the results equivalent to those produced by G04AFF can be extracted from the results produced by G04CAF.
G04AFF       G04CAF

ROW(i)       TMEAN(IMEAN(1)+i), i = 1,2,...,NR
COL(j)       TMEAN(j), j = 1,2,...,NC
CELL(i,j)    TMEAN(IMEAN(2)+(j-1)*NR+i),
             i = 1,2,...,NR; j = 1,2,...,NC
GM           BMEAN(1)
SS(1)        TABL(3,2)
SS(2)        TABL(2,2)
SS(i)        TABL(4,2)
IDF(1)       TABL(3,1)
IDF(2)       TABL(2,1)
IDF(i)       TABL(4,1)
F(1)         TABL(3,4)
F(2)         TABL(2,4)
F(3)         TABL(4,4)
FP(1)        TABL(3,5)
FP(2)        TABL(2,5)
FP(3)        TABL(4,5)
Note how rows and columns have swapped.
The following additional declarations are required.
REAL (KIND=nag_wp) TABL(6,5), R(NMAX), TMEAN(MAXT), E(MAXT), BMEAN(1), &
                   SEMEAN(5)
INTEGER            IMEAN(5), IWK(NMAX+6), LFAC(2)
NMAX and MAXT are integers such that NMAX M × NR × NC  and MAXT NR + NC + NR × NC .

G05 – Random Number Generators

G05CAF

Withdrawn at Mark 22.
Replaced by G05SAF.
Old: DO 20 I = 1, N
        X(I) = G05CAF(X(I))
  20 CONTINUE
New: CALL G05SAF(N,STATE,X,IFAIL)
The integer array STATE in the call to G05SAF contains information on the base generator being used. This array must have been initialized prior to calling G05SAF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SAF is likely to be different from those produced by G05CAF.

G05CBF

Withdrawn at Mark 22.
Replaced by G05KFF.
Old: CALL G05CBF(I)
New: LSEED = 1
     SEED(1) = I
     GENID = 1
     SUBID = 1
     CALL G05KFF(GENID,SUBID,SEED,LSEED,STATE,LSTATE,IFAIL)
The integer array STATE in the call to G05KFF contains information on the base generator being used. The base generator is chosen via the integer parameters GENID and SUBID. The required length of the array STATE depends on the base generator chosen. Due to changes in the underlying code a sequence of values produced by using a random number generator initialized via a call to G05KFF is likely to be different from a sequence produced by a generator initialized by G05CBF, even if the same value for I is used.

G05CCF

Withdrawn at Mark 22.
Replaced by G05KGF.
Old: CALL G05CCF
New: GENID = 1
     SUBID = 1
     CALL G05KGF(GENID,SUBID,STATE,LSTATE,IFAIL)
The integer array STATE in the call to G05KGF contains information on the base generator being used. The base generator is chosen via the integer parameters GENID and SUBID. The required length of the array STATE depends on the base generator chosen.

G05CFF

Withdrawn at Mark 22.
Replaced by F06DFF.
Old: CALL G05CFF(IA,NI,XA,NX,IFAIL)
New: LSTATE = STATE(1)
     CALL F06DFF(LSTATE,STATE,1,CSTATE,1)
The state of the base generator for the group of routines G05KFF, G05KGF, G05KHF, G05KJF, G05NCF, G05NDF, G05PDFG05PZF, G05RCFG05RZF, G05S and G05T can be saved by simply creating a local copy of the array STATE. The first element of the STATE array contains the number of elements that are used by the random number generating routines, therefore either this number of elements can be copied, or the whole array (as defined in the calling program).

G05CGF

Withdrawn at Mark 22.
Replaced by F06DFF.
Old: CALL G05CGF(IA,NI,XA,NX,IFAIL)
New: LSTATE = CSTATE(1)
     CALL F06DFF(LSTATE,CSTATE,1,STATE,1)
The state of the base generator for the group of routines G05KFF, G05KGF, G05KHF, G05KJF, G05NCF, G05NDF, G05PDFG05PZF, G05RCFG05RZF, G05S and G05T can be restored by simply copying back the previously saved copy of the STATE array. The first element of the STATE array contains the number of elements that are used by the random number generating routines, therefore either this number of elements can be copied, or the whole array (as defined in the calling program).

G05DAF

Withdrawn at Mark 22.
Replaced by G05SQF.
Old: DO 10 I = 1, N
        X(I) = G05DAF(AA,BB)
  10 CONTINUE
New: A = MIN(AA,BB)
     B = MAX(AA,BB)
     IFAIL = 0
     CALL G05SQF(N,A,B,STATE,X,IFAIL)
The old routine G05DAF returns a single variate at a time, whereas the new routine G05SQF returns a vector of N values in one go. In G05SQF the minimum value must be held in the parameter A and the maximum in parameter B, therefore A<B. This was not the case for the equivalent parameters in G05DAF.
The integer array STATE in the call to G05SQF contains information on the base generator being used. This array must have been initialized prior to calling G05SQF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SQF is likely to be different from those produced by G05DAF.

G05DBF

Withdrawn at Mark 22.
Replaced by G05SFF.
Old: DO 10 I = 1, N
        X(I) = G05DBF(AA)
  10 CONTINUE
New: A = ABS(AA)
     IFAIL = 0
     CALL G05SFF(N,A,STATE,X,IFAIL)
The old routine G05DBF returns a single variate at a time, whereas the new routine G05SFF returns a vector of N values in one go. In G05SFF parameter A must be non-negative, this was not the case for the equivalent parameter in G05DBF.
The integer array STATE in the call to G05SFF contains information on the base generator being used. This array must have been initialized prior to calling G05SFF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SFF is likely to be different from those produced by G05DBF.

G05DCF

Withdrawn at Mark 22.
Replaced by G05SLF.
Old: DO 10 I = 1, N
        X(I) = G05DCF(A,BB)
  10 CONTINUE
New: B = ABS(BB)
     IFAIL = 0
     CALL G05SLF(N,A,B,STATE,X,IFAIL)
The old routine G05DCF returns a single variate at a time, whereas the new routine G05SLF returns a vector of N values in one go. In G05SLF the spread (parameter A) must be positive, this was not the case for the equivalent parameters in G05DCF.
The integer array STATE in the call to G05SLF contains information on the base generator being used. This array must have been initialized prior to calling G05SLF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SLF is likely to be different from those produced by G05DCF.

G05DDF

Withdrawn at Mark 22.
Replaced by G05SKF.
Old: DO 10 I = 1, N
        X(I) = G05DDF(XMU,SD)
  10 CONTINUE
New: VAR = SD**2
     IFAIL = 0
     CALL G05SKF(N,XMU,VAR,STATE,X,IFAIL)
The old routine G05DDF returns a single variate at a time, whereas the new routine G05SKF returns a vector of N values in one go. G05SKF expects the variance of the Normal distribution (parameter VAR), compared to G05DDF which expected the standard deviation.
The integer array STATE in the call to G05SKF contains information on the base generator being used. This array must have been initialized prior to calling G05SKF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SKF is likely to be different from those produced by G05DDF.

G05DEF

Withdrawn at Mark 22.
Replaced by G05SMF.
Old: DO 10 I = 1, N
        X(I) = G05DEF(XMU,SD)
  10 CONTINUE
New: VAR = SD**2
     IFAIL = 0
     CALL G05SMF(N,XMU,VAR,STATE,X,IFAIL)
The old routine G05DEF returns a single variate at a time, whereas the new routine G05SMF returns a vector of N values in one go. G05SMF expects the variance of the corresponding Normal distribution (parameter VAR), compared to G05DEF which expected the standard deviation.
The integer array STATE in the call to G05SMF contains information on the base generator being used. This array must have been initialized prior to calling G05SMF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SMF is likely to be different from those produced by G05DEF.

G05DFF

Withdrawn at Mark 22.
Replaced by G05SCF.
Old: DO 10 I = 1, N
        X(I) = G05DFF(XMED,B)
  10 CONTINUE
New: SEMIQR = ABS(B)
     IFAIL = 0
     CALL G05SCF(N,XMED,SEMIQR,STATE,X,IFAIL)
The old routine G05DFF returns a single variate at a time, whereas the new routine G05SCF returns a vector of N values in one go. G05SCF expects the semi-interquartile range (parameter SEMIQR) to be non-negative, this was not the case for the equivalent parameter in G05DFF.
The integer array STATE in the call to G05SCF contains information on the base generator being used. This array must have been initialized prior to calling G05SCF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SCF is likely to be different from those produced by G05DFF.

G05DHF

Withdrawn at Mark 22.
Replaced by G05SDF.
Old: DO 10 I = 1, N
        X(I) = G05DHF(DF,IFAIL)
  10 CONTINUE
New: CALL G05SDF(N,DF,STATE,X,IFAIL)
The old routine G05DHF returns a single variate at a time, whereas the new routine G05SDF returns a vector of N values in one go.
The integer array STATE in the call to G05SDF contains information on the base generator being used. This array must have been initialized prior to calling G05SDF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SDF is likely to be different from those produced by G05DHF.

G05DJF

Withdrawn at Mark 22.
Replaced by G05SNF.
Old: DO 10 I = 1, N
        X(I) = G05DJF(DF,IFAIL)
  10 CONTINUE
New: CALL G05SNF(N,DF,STATE,X,IFAIL)
The old routine G05DJF returns a single variate at a time, whereas the new routine G05SNF returns a vector of N values in one go.
The integer array STATE in the call to G05SNF contains information on the base generator being used. This array must have been initialized prior to calling G05SNF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SNF is likely to be different from those produced by G05DJF.

G05DKF

Withdrawn at Mark 22.
Replaced by G05SHF.
Old: DO 10 I = 1, N
        X(I) = G05DKF(DF1,DF2,IFAIL)
  10 CONTINUE
New: CALL G05SHF(N,DF1,DF2,STATE,X,IFAIL)
The old routine G05DKF returns a single variate at a time, whereas the new routine G05SHF returns a vector of N values in one go.
The integer array STATE in the call to G05SHF contains information on the base generator being used. This array must have been initialized prior to calling G05SHF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SHF is likely to be different from those produced by G05DKF.

G05DPF

Withdrawn at Mark 22.
Replaced by G05SSF.
Old: DO 10 I = 1, N
        X(I) = G05DPF(A,B,IFAIL)
  10 CONTINUE
New: CALL G05SSF(N,A,B,STATE,X,IFAIL)
The old routine G05DPF returns a single variate at a time, whereas the new routine G05SSF returns a vector of N values in one go.
The integer array STATE in the call to G05SSF contains information on the base generator being used. This array must have been initialized prior to calling G05SSF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SSF is likely to be different from those produced by G05DPF.

G05DRF

Withdrawn at Mark 22.
Replaced by G05TKF.
Old: DO 10 I = 1, N
        X(I) = G05DRF(LAMDA,IFAIL)
  10 CONTINUE
New: MODE = 3
     CALL G05TJF(MODE,N,LAMBDA,R,LR,STATE,X,IFAIL)
The old routine G05DRF returns a single variate at a time, whereas the new routine G05TJF returns a vector of N values in one go. For efficiency, the new routine can make use of a reference vector, R. If, as in this case, the integer parameter MODE is set to 3, the real reference vector R is not referenced, and its length, LR, need only be at least one.
The integer array STATE in the call to G05TJF contains information on the base generator being used. This array must have been initialized prior to calling G05TJF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TJF is likely to be different from those produced by G05DRF.

G05DYF

Withdrawn at Mark 22.
Replaced by G05TLF.
Old: DO 10 I = 1, N
        X(I) = G05DYF(AA,BB)
  10 CONTINUE
New: IFAIL = 0
     A = MIN(AA,BB)
     B = MAX(AA,BB)
     CALL G05TLF(N,A,B,STATE,X,IFAIL)
The old routine G05DYF returns a single variate at a time, whereas the new routine G05TLF returns a vector of N values in one go. In G05TLF the minimum value must be held in the parameter A and the maximum in parameter B, therefore AB. This was not the case for the equivalent parameters in G05DYF.
The integer array STATE in the call to G05TLF contains information on the base generator being used. This array must have been initialized prior to calling G05TLF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TLF is likely to be different from those produced by G05DYF.

G05DZF

Withdrawn at Mark 22.
Replaced by G05TBF.
Old: DO 20 I = 1, N
        X(I) = G05DZF(PP)
  20 CONTINUE
New: P = MAX(0.0D0,MIN(PP,1.0D0))
     IFAIL = 0
     CALL G05TBF(N,P,STATE,X,IFAIL)
The old routine G05DZF returns a single variate at a time, whereas the new routine G05TBF returns a vector of N values in one go. The real parameter P in G05TBF must not be less than zero or greater than one, this was not the case for the equivalent parameter in G05DZF.
The integer array STATE in the call to G05TBF contains information on the base generator being used. This array must have been initialized prior to calling G05TBF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TBF is likely to be different from those produced by G05DZF.

G05EAF

Withdrawn at Mark 22.
Replaced by G05RZF.
Old: CALL G05EAF(XMU,M,C,LDC,EPS,R1,LR1,IFAIL)
New: MODE = 0
     CALL G05RZF(MODE,N,M,XMU,C,LDC,R,LR,STATE,X,LDX,IFAIL)
The old routine G05EAF sets up a reference vector for use by G05EZF. The functionality of both these routines has been combined into the single new routine G05RZF. Setting MODE=0 in the call to G05RZF only sets up the real reference vector R and hence mimics the functionality of G05EAF.
The length of the real reference vector, R, in G05RZF must be at least M×M+1+1. In contrast to the equivalent parameter in G05EAF, this array must be allocated in the calling program.

G05EBF

Withdrawn at Mark 22.
Replaced by G05TLF.
There is no direct replacement for routine G05EBF. G05EBF sets up a reference vector for use by G05EYF, this reference vector is no longer required. The replacement routine for G05EYF is G05TLF.

G05ECF

Withdrawn at Mark 22.
Replaced by G05TJF.
Old: CALL G05ECF(LAMBDA,R1,LR1,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EYF(R1,LR1)
  10 CONTINUE
New: MODE = 2
     CALL G05TJF(MODE,N,LAMBDA,R,LR,STATE,X,IFAIL)
The old routine G05ECF sets up a reference vector for use by G05EYF. The replacement routine G05TJF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05TJF sets up the real reference vector R and hence mimics the functionality of G05ECF. Setting MODE=1 generates a series of variates from a reference vector mimicking the functionality of G05EYF for this particular distribution. Setting MODE=2 initializes the reference vector and generates the variates in one go.
The routine G05EYF returns a single variate at a time, whereas the new routine G05TJF returns a vector of N values in one go.
The length of the real reference vector, R, in G05TJF, must be allocated in the calling program in contrast to the equivalent parameter in G05ECF, see the documentation for more details.
The integer array STATE in the call to G05TJF contains information on the base generator being used. This array must have been initialized prior to calling G05TJF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TJF is likely to be different from those produced by a combination of G05ECF and G05EYF.

G05EDF

Withdrawn at Mark 22.
Replaced by G05TAF.
Old: CALL G05EDF(M,P,R1,LR1,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EYF(R1,LR1)
  10 CONTINUE
New: MODE = 2
     CALL G05TAF(MODE,N,M,P,R,LR,STATE,X,IFAIL)
The old routine G05EDF sets up a reference vector for use by G05EYF. The replacement routine G05TAF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05TAF sets up the real reference vector R and hence mimics the functionality of G05EDF. Setting MODE=1 generates a series of variates from a reference vector mimicking the functionality of G05EYF for this particular distribution. Setting MODE=2 initializes the reference vector and generates the variates in one go.
The routine G05EYF returns a single variate at a time, whereas the new routine G05TAF returns a vector of N values in one go.
The length of the real reference vector, R, in G05TAF, needs to be a different length from the equivalent parameter in G05EDF, see the documentation for more details.
The integer array STATE in the call to G05TAF contains information on the base generator being used. This array must have been initialized prior to calling G05TAF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TAF is likely to be different from those produced by a combination of G05EDF and G05EYF.

G05EEF

Withdrawn at Mark 22.
Replaced by G05THF.
Old: CALL G05EEF(M,P,R1,LR1,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EYF(R1,LR1)
  10 CONTINUE
New: MODE = 2
     CALL G05THF(MODE,N,M,P,R,LR,STATE,X,IFAIL)
The old routine G05EEF sets up a reference vector for use by G05EYF. The replacement routine G05THF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05THF sets up the real reference vector R and hence mimics the functionality of G05EEF. Setting MODE=1 generates a series of variates from a reference vector mimicking the functionality of G05EYF for this particular distribution. Setting MODE=2 initializes the reference vector and generates the variates in one go.
The routine G05EYF returns a single variate at a time, whereas the new routine G05THF returns a vector of N values in one go.
The length of the real reference vector, R, in G05THF, needs to be a different length from the equivalent parameter in G05EEF, see the documentation for G05THF for more details.
The integer array STATE in the call to G05THF contains information on the base generator being used. This array must have been initialized prior to calling G05THF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05THF is likely to be different from those produced by a combination of G05EEF and G05EYF.

G05EFF

Withdrawn at Mark 22.
Replaced by G05TEF.
Old: CALL G05EFF(NS,M,NP,R1,LR1,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EYF(R1,LR1)
  10 CONTINUE
New: MODE = 2
     CALL G05TEF(MODE,N,NS,NP,M,R,LR,STATE,X,IFAIL)
The old routine G05EFF sets up a reference vector for use by G05EYF. The replacement routine G05TEF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05TEF sets up the real reference vector R and hence mimics the functionality of G05EFF. Setting MODE=1 generates a series of variates from a reference vector mimicking the functionality of G05EYF for this particular distribution. Setting MODE=2 initializes the reference vector and generates the variates in one go.
The routine G05EYF returns a single variate at a time, whereas the new routine G05TEF returns a vector of N values in one go.
The length of the real reference vector, R, in G05TEF, needs to be a different length from the equivalent parameter in G05EFF, see the documentation for more details.
The integer array STATE in the call to G05TEF contains information on the base generator being used. This array must have been initialized prior to calling G05TEF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TEF is likely to be different from those produced by a combination of G05EFF and G05EYF.

G05EGF

Withdrawn at Mark 22.
Replaced by G05PHF.
Old: CALL G05EGF(E,A,NA,B,NB,R,NR,VAR,IFAIL)
New: AVAR = B(1)**2
     IQ = NB - 1
     IF (AVAR.GT.0.0D0) THEN
        DO 10 I = 1, IQ
           THETA(I) = -B(I+1)/B(1)
  10    CONTINUE
     ELSE
        DO 20 I = 1, IQ
           THETA(I) = 0.0D0
  20    CONTINUE
     END IF
     MODE = 0
     CALL G05PHF(MODE,N,E,NA,A,IQ,THETA,AVAR,R,LR,STATE,VAR,X,IFAIL)
The real vector THETA must be of length at least IQ=NB-1.
The old routine G05EGF sets up a reference vector for use by G05EWF. The replacement routine G05PHF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05PHF sets up the real reference vector R and hence mimics the functionality of G05EGF. When MODE=0, the integer array STATE in the call to G05PHF need not be set.

G05EHF

Withdrawn at Mark 22.
Replaced by G05NCF.
Old: CALL G05EHF(INDEX,N,IFAIL)
New: CALL G05NCF(INDEX,N,STATE,IFAIL)
The integer array STATE in the call to G05NCF contains information on the base generator being used. This array must have been initialized prior to calling G05NCF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05NCF is likely to be different from those produced by G05EHF.

G05EJF

Withdrawn at Mark 22.
Replaced by G05NDF.
Old: CALL G05EJF(IA,N,IZ,M,IFAIL)
New: CALL G05NDF(IA,N,IZ,M,STATE,IFAIL)
The integer array STATE in the call to G05NDF contains information on the base generator being used. This array must have been initialized prior to calling G05NDF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05NDF is likely to be different from those produced by G05EJF.

G05EWF

Withdrawn at Mark 22.
Replaced by G05PHF.
Old: CALL G05EGF(E,A,NA,B,NB,R,NR,VAR,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EWF(R,NR,IFAIL)
  10 CONTINUE
New: AVAR = B(1)**2
     IQ = NB - 1
     IF (AVAR.GT.0.0D0) THEN
        DO 10 I = 1, IQ
           THETA(I) = -B(I+1)/B(1)
  10    CONTINUE
     ELSE
        DO 20 I = 1, IQ
           THETA(I) = 0.0D0
  20    CONTINUE
     END IF
     MODE = 2
     CALL G05PHF(MODE,N,E,NA,A,NB-1,THETA,AVAR,VAR,R,LR,STATE,X,IFAIL)
The real vector THETA must be of length at least IQ=NB-1.
The old routine G05EGF sets up a reference vector for use by G05EWF. The replacement routine G05PHF is now used to both set up a reference vector and generate the required variates. Setting the integer parameter MODE to 0 in the call to G05PHF sets up the real reference vector R and hence mimics the functionality of G05EGF. Setting MODE to 1 generates a series of variates from a reference vector mimicking the functionality of G05EWF. Setting MODE to 2 initializes the reference vector and generates the variates in one go.
The integer array STATE in the call to G05PHF contains information on the base generator being used. This array must have been initialized prior to calling G05PHF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PHF is likely to be different from those produced by G05EGF.

G05EXF

Withdrawn at Mark 22.
Replaced by G05TDF.
Old: CALL G05EXF(P,NP,IP1,ITYPE,R1,LR1,IFAIL)
     DO 10 I = 1, N
        X(I) = G05EYF(R1,LR1)
  10 CONTINUE
New: MODE = 2
     CALL G05TDF(MODE,N,P,NP,IP1,ITYPE,R,LR,STATE,X,IFAIL)
The old routine G05EXF sets up a reference vector for use by G05EYF. The replacement routine G05TDF is now used to both set up a reference vector and generate the required variates. Setting MODE=0 in the call to G05TDF sets up the real reference vector R and hence mimics the functionality of G05EXF. Setting MODE=1 generates a series of variates from a reference vector mimicking the functionality of G05EYF for this particular distribution. Setting MODE=2 initializes the reference vector and generates the variates in one go.
The routine G05EYF returns a single variate at a time, whereas the new routine G05TDF returns a vector of N values in one go.
The length of the real reference vector, R, in G05TDF must be allocated in the calling program in contrast to the equivalent parameter in G05EXF, see the documentation for more details.
The integer array STATE in the call to G05TDF contains information on the base generator being used. This array must have been initialized prior to calling G05TDF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05TDF is likely to be different from those produced by a combination of G05EXF and G05EYF.

G05EYF

Withdrawn at Mark 22.
Replaced by G05TDF.
There is no direct replacement routine for G05EYF.
G05EYF is designed to generate random draws from a distribution defined by a reference vector. These reference vectors are created by other routines in Chapter G05, for example G05EBF, which have themselves been superseded. In order to replace a call to G05EYF you must identify which NAG routine generated the reference vector being used and look up its replacement. For example, to replace a call to G05EYF preceded by a call to G05EBF, as in:
    CALL G05EBF(M,IB,R,NR,IFAIL)
    X = G05EYF(R,NR)
you would need to look at the replacement routine for G05EBF.

G05EZF

Withdrawn at Mark 22.
Replaced by G05RZF.
Old: CALL G05EAF(XMU,N,C,LDC,EPS,R1,LR1,IFAIL)
     DO 20 I = 1, N
        CALL G05EZF(CX,M,R,NR,IFAIL)
        DO 30 J = 1, M
           X(I,J) = CX(J)
  30    CONTINUE
  20 CONTINUE
New: MODE = 2
     CALL G05RZF(MODE,N,M,XMU,C,LDC,R,LR,STATE,X,LDX,IFAIL)
The old routine G05EAF sets up a reference vector for use by G05EZF. The functionality of both these routines has been combined into the single new routine G05RZF. Setting MODE=2 in the call to G05RZF sets up the real reference vector R and generates the draws from the multivariate Normal distribution in one go.
The old routine G05EZF returns a single (M-dimensional vector) draw from the multivariate Normal distribution at a time, whereas the new routine G05RZF returns an N by M matrix of N draws in one go.
The integer array STATE in the call to G05RZF contains information on the base generator being used. This array must have been initialized prior to calling G05RZF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05RZF is likely to be different from those produced by G05EZF.

G05FAF

Withdrawn at Mark 22.
Replaced by G05SQF.
Old: CALL G05FAF(AA,BB,N,X)
New: A = MIN(AA,BB)
     B = MAX(AA,BB)
     IFAIL = 0
     CALL G05SQF(N,A,B,STATE,X,IFAIL)
In G05SQF the minimum value must be held in the parameter A and the maximum in parameter B, therefore AB. This was not the case for the equivalent parameters in G05FAF.
The integer array STATE in the call to G05SQF contains information on the base generator being used. This array must have been initialized prior to calling G05SQF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SQF is likely to be different from those produced by G05FAF.

G05FBF

Withdrawn at Mark 22.
Replaced by G05SFF.
Old: CALL G05FBF(AA,N,X)
New: A = ABS(AA)
     IFAIL = 0
     CALL G05SFF(N,A,STATE,X,IFAIL)
In G05SFF parameter A must be non-negative, this was not the case for the equivalent parameter in G05FBF.
The integer array STATE in the call to G05SFF contains information on the base generator being used. This array must have been initialized prior to calling G05SFF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SFF is likely to be different from those produced by G05FBF.

G05FDF

Withdrawn at Mark 22.
Replaced by G05SKF.
Old: CALL G05FDF(XMU,SD,N,X)
New: VAR = SD**2
     IFAIL = 0
     CALL G05SKF(N,XMU,VAR,STATE,X,IFAIL)
G05SKF expects the variance of the Normal distribution (parameter VAR), compared to G05FDF which expected the standard deviation.
The integer array STATE in the call to G05SKF contains information on the base generator being used. This array must have been initialized prior to calling G05SKF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SKF is likely to be different from those produced by G05FDF.

G05FEF

Withdrawn at Mark 22.
Replaced by G05SBF.
Old: CALL G05FEF(A,B,N,X,IFAIL)
New: CALL G05SBF(N,A,B,STATE,X,IFAIL)
The integer array STATE in the call to G05SBF contains information on the base generator being used. This array must have been initialized prior to calling G05SBF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SBF is likely to be different from those produced by G05FEF.

G05FFF

Withdrawn at Mark 22.
Replaced by G05SJF.
Old: CALL G05FFF(A,B,N,X,IFAIL)
New: CALL G05SJF(N,A,B,STATE,X,IFAIL)
The integer array STATE in the call to G05SJF contains information on the base generator being used. This array must have been initialized prior to calling G05SJF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SJF is likely to be different from those produced by G05FFF.

G05FSF

Withdrawn at Mark 22.
Replaced by G05SRF.
Old: CALL G05FSF(VK,N,X,IFAIL)
New: CALL G05SRF(N,VK,STATE,X,IFAIL)
The integer array STATE in the call to G05SRF contains information on the base generator being used. This array must have been initialized prior to calling G05SRF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05SRF is likely to be different from those produced by G05FSF.

G05GAF

Withdrawn at Mark 22.
Replaced by G05PXF.
Old: CALL G05GAF(SIDE,INIT,M,N,A,LDA,WK,IFAIL)
New: CALL G05PXF(SIDE,INIT,M,N,STATE,A,LDA,IFAIL)
The integer array STATE in the call to G05PXF contains information on the base generator being used. This array must have been initialized prior to calling G05PXF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PXF is likely to be different from those produced by G05GAF.

G05GBF

Withdrawn at Mark 22.
Replaced by G05PYF.
Old: CALL G05GBF(N,D,C,LDC,EPS,WK,IFAIL)
New: CALL G05PYF(N,D,EPS,STATE,C,LDC,IFAIL)
The integer array STATE in the call to G05PYF contains information on the base generator being used. This array must have been initialized prior to calling G05PYF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PYF is likely to be different from those produced by G05GBF.

G05HDF

Withdrawn at Mark 22.
Replaced by G05PJF.
Old: CALL G05HDF(MODE,K,IP,IQ,MEAN,PAR,LPAR,QQ,LDQQ,N,W,REF,LREF,  &
                 IWORK,LIWORK,IFAIL)
New: IF (MODE.EQ.'S') THEN
        IMODE = 0
     ELSE IF (MODE.EQ.'C') THEN
        IMODE = 1
     ELSE IF (MODE.EQ.'R') THEN
        IMODE = 3
     END IF
     LL = 0
     DO 30 L = 1, IP
        DO 20 I = 1, K
           DO 10 J = 1, K
              LL = LL + 1
              PHI(I,J,L) = PAR(LL)
  10       CONTINUE
  20    CONTINUE
  30 CONTINUE
     DO 60 L = 1, IQ-1
        DO 50 I = 1, K
           DO 40 J = 1, K
              LL = LL + 1
              THETA(I,J,L) = PAR(LL)
  40       CONTINUE
  50    CONTINUE
  60 CONTINUE
     IF (MEAN.EQ.'M') THEN
        DO 70 I = 1, K
           LL = LL + 1
           XMEAN(I) = PAR(LL)
  70    CONTINUE
     ELSE
        DO 80 I = 1, K
           XMEAN(I) = 0.0D0
  80    CONTINUE
     END IF
     LDW = N
     CALL G05PJF(IMODE,N,K,XMEAN,IP,PHI,IQ,THETA,QQ,LDQQ,REF,LREF, &
                 STATE,W,LDW,IWORK,LIWORK,IFAIL)
The integer parameter IMODE should be set to 0, 1 or 3 in place of the parameter MODE having settings of 'S', 'C' or 'R' respectively. The real array PHI should have length at least max1,IP×K×K ; if dimensioned as PHIK,K,IP  (as in the above example) then PHI i,j,l  will contain the element PAR l-1 × k × k + i-1 × k + j . The real array THETA should have length at least max1,IQ×K×K ; if dimensioned as THETA K,K,IQ  (as in the above example) then THETA i,j,l  will contain the element PAR IP × k × k + l-1 × k × k + i-1 × k + j . The real array XMEAN should have length at least K; if MEAN='M'  then XMEAN i  will contain the element PAR IP + IQ × k × k + i , otherwise XMEAN should contain an array of zero values.
The integer array STATE in the call to G05PJF contains information on the base generator being used. This array must have been initialized prior to calling G05PJF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PJF is likely to be different from those produced by G05HDF.

G05HKF

Withdrawn at Mark 24.
Replaced by G05PDF.
Old: CALL G05HKF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,RVEC,IGEN,  &
                 ISEED,RWSAV,IFAIL)
New: CALL G05PDF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,R,LR,STATE, &
                 IFAIL)
The integer array STATE in the call to G05PDF contains information on the base generator being used. This array must have been initialized prior to calling G05PDF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PDF is likely to be different from those produced by G05HKF.

G05HLF

Withdrawn at Mark 24.
Replaced by G05PEF.
Old: CALL G05HLF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,RVEC,IGEN,  &
                 ISEED,RWSAV,IFAIL)
New: CALL G05PEF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,R,LR,STATE, &
                 IFAIL)
The integer array STATE in the call to G05PEF contains information on the base generator being used. This array must have been initialized prior to calling G05PEF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PEF is likely to be different from those produced by G05HLF.

G05HMF

Withdrawn at Mark 24.
Replaced by G05PFF.
Old: CALL G05HMF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,RVEC,IGEN,  &
                 ISEED,RWSAV,IFAIL)
New: CALL G05PFF(DIST,NUM,IP,IQ,THETA,GAMMA,DF,HT,ET,FCALL,R,LR,STATE, &
                 IFAIL)
The integer array STATE in the call to G05PFF contains information on the base generator being used. This array must have been initialized prior to calling G05PFF with a call to either G05KFF or G05KGF. The required length of the array STATE will depend on the base generator chosen during initialization. Due to changes in the underlying code the sequence of values produced by G05PFF is likely to be different from those produced by G05HMF.

G05HNF

Withdrawn at Mark 24.
Replaced by G05PGF.
Old: CALL G05HNF(DIST,NUM,IP,IQ,THETA,DF,HT,ET,FCALL,RVEC,IGEN,ISEED, &
                 RWSAV,IFAIL)
New: CALL G05PGF(DIST,NUM,IP,IQ,THETA,DF,HT,ET,FCALL,RVEC,STATE,      &
                 IFAIL)

G05KAF

Withdrawn at Mark 24.
Replaced by G05SAF.
Old: DO 20 I = 1, N
        X(I) = G05KAF(IGEN,ISEED)
  20 CONTINUE
New: CALL G05SAF(N,STATE,X,IFAIL)
The old routine G05KAF returns a single variate at a time, whereas the new routine G05SAF returns a vector of N values in one go.

G05KBF

Withdrawn at Mark 24.
Replaced by G05KFF.
Old: G05KBF(IGEN,ISEED)
New: IF (IGEN.EQ.0) THEN
        CALL G05KFF(1,1,ISEED,LSEED,STATE,LSTATE,IFAIL)
     ELSE
        CALL G05KFF(2,IGEN,ISEED,LSEED,STATE,LSTATE,IFAIL)
     END IF

G05KCF

Withdrawn at Mark 24.
Replaced by G05KGF.
Old: CALL G05KCF(IGEN,ISEED)
New: IF (IGEN.EQ.0) THEN
        CALL G05KGF(1,1,STATE,LSTATE,IFAIL)
     ELSE
        CALL G05KGF(2,IGEN,STATE,LSTATE,IFAIL)
     END IF

G05KEF

Withdrawn at Mark 24.
Replaced by G05TBF.
Old: DO 20 I = 1, N
        X(I) = G05KEF(P,IGEN,ISEED,IFAIL)
  20 CONTINUE
New: CALL G05TBF(N,P,STATE,X,IFAIL)
The old routine G05KEF returns a single variate at a time, whereas the new routine G05TBF returns a vector of N values in one go.

G05LAF

Withdrawn at Mark 24.
Replaced by G05SKF.
Old: CALL G05LAF(XMU,VAR,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SKF(N,XMU,VAR,STATE,X,IFAIL)

G05LBF

Withdrawn at Mark 24.
Replaced by G05SNF.
Old: CALL G05LBF(DF,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SNF(N,DF,STATE,X,IFAIL)

G05LCF

Withdrawn at Mark 24.
Replaced by G05SDF.
Old: CALL G05LCF(DF,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SDF(N,DF,STATE,X,IFAIL)

G05LDF

Withdrawn at Mark 24.
Replaced by G05SHF.
Old: CALL G05LDF(DF1,DF2,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SHF(N,DF1,DF2,STATE,X,IFAIL)

G05LEF

Withdrawn at Mark 24.
Replaced by G05SBF.
Old: CALL G05LEF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SBF(N,A,B,STATE,X,IFAIL)

G05LFF

Withdrawn at Mark 24.
Replaced by G05SJF.
Old: CALL G05LFF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SJF(N,A,B,STATE,X,IFAIL)

G05LGF

Withdrawn at Mark 24.
Replaced by G05SQF.
Old: CALL G05LGF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SQF(N,A,B,STATE,X,IFAIL)

G05LHF

Withdrawn at Mark 24.
Replaced by G05SPF.
Old: CALL G05LHF(XMIN,XMAX,XMED,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SPF(N,XMIN,XMED,XMAX,STATE,X,IFAIL)

G05LJF

Withdrawn at Mark 24.
Replaced by G05SFF.
Old: CALL G05LJF(A,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SFF(N,A,STATE,X,IFAIL)

G05LKF

Withdrawn at Mark 24.
Replaced by G05SMF.
Old: CALL G05LKF(XMU,VAR,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SMF(N,XMU,VAR,STATE,X,IFAIL)

G05LLF

Withdrawn at Mark 24.
Replaced by G05SJF.
Old: CALL G05LLF(XMED,SEMIQR,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SCF(N,XMED,SEMIQR,STATE,X,IFAIL)

G05LMF

Withdrawn at Mark 24.
Replaced by G05SSF.
Old: CALL G05LMF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SSF(N,A,B,STATE,X,IFAIL)

G05LNF

Withdrawn at Mark 24.
Replaced by G05SLF.
Old: CALL G05LNF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SLF(N,A,B,STATE,X,IFAIL)

G05LPF

Withdrawn at Mark 24.
Replaced by G05SRF.
Old: CALL G05LPF(VK,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SRF(N,VK,STATE,X,IFAIL)

G05LQF

Withdrawn at Mark 24.
Replaced by G05SGF.
Old: CALL G05LQF(NMIX,A,WGT,N,X,IGEN,ISEED,IFAIL)
New: CALL G05SGF(N,NMIX,A,WGT,STATE,X,IFAIL)

G05LXF

Withdrawn at Mark 24.
Replaced by G05RYF.
Old: CALL G05LXF(MODE,DF,M,XMU,C,LDC,N,X,LDX,IGEN,ISEED,R,LR,IFAIL)
New: CALL G05RYF(MODE,N,DF,M,XMU,C,LDC,R,LR,STATE,X,LDX,IFAIL)

G05LYF

Withdrawn at Mark 24.
Replaced by G05RZF.
Old: G05LYF(MODE,M,XMU,C,LDC,N,X,LDX,IGEN,ISEED,R,LR,IFAIL)
New: G05RZF(MODE,N,M,XMU,C,LDC,R,LR,STATE,X,LDX,IFAIL)

G05LZF

Withdrawn at Mark 24.
Replaced by G05RZF.
Old: CALL G05LZF(MODE,M,XMU,C,LDC,X,IGEN,ISEED,R,LR,IFAIL)
New: N = 1
     LDX = 1
     CALL G05RZF(MODE,N,M,XMU,C,LDC,R,LR,STATE,X,LDX,IFAIL)

G05MAF

Withdrawn at Mark 24.
Replaced by G05TLF.
Old: CALL G05MAF(A,B,N,X,IGEN,ISEED,IFAIL)
New: CALL G05TLF(N,A,B,STATE,X,IFAIL)

G05MBF

Withdrawn at Mark 24.
Replaced by G05TCF.
Old: CALL G05MBF(MODE,P,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TCF(MODE,N,P,R,LR,STATE,X,IFAIL)
     DO 20 I = 1, N
        X(I) = X(I) + 1
  20 CONTINUE
G05MBF returned the number of trials required to get the first success, whereas G05TCF returns the number of failures before the first success, therefore the value returned by G05TCF is one less than the equivalent value returned from G05MBF.

G05MCF

Withdrawn at Mark 24.
Replaced by G05THF.
Old: CALL G05MCF(MODE,M,P,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05THF(MODE,N,M,P,R,LR,STATE,X,IFAIL)

G05MDF

Withdrawn at Mark 24.
Replaced by G05TFF.
Old: CALL G05MDF(MODE,A,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TFF(MODE,N,A,R,LR,STATE,X,IFAIL)

G05MEF

Withdrawn at Mark 24.
Replaced by G05TKF.
Old: CALL G05MEF(M,VLAMDA,X,IGEN,ISEED,IFAIL)
New: CALL G05TKF(M,VLAMDA,STATE,X,IFAIL)

G05MJF

Withdrawn at Mark 24.
Replaced by G05TAF.
Old: CALL G05MJF(MODE,M,P,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TAF(MODE,N,M,P,R,LR,STATE,X,IFAIL)

G05MKF

Withdrawn at Mark 24.
Replaced by G05TJF.
Old: CALL G05MKF(MODE,LAMBDA,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TJF(MODE,N,LAMBDA,R,LR,STATE,X,IFAIL)

G05MLF

Withdrawn at Mark 24.
Replaced by G05TEF.
Old: CALL G05MLF(MODE,NS,NP,M,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TEF(MODE,N,NS,NP,M,R,LR,STATE,X,IFAIL)

G05MRF

Withdrawn at Mark 24.
Replaced by G05TGF.
Old: CALL G05MRF(MODE,M,K,P,N,X,LDX,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TGF(MODE,N,M,K,P,R,LR,STATE,X,LDX,IFAIL)

G05MZF

Withdrawn at Mark 24.
Replaced by G05TDF.
Old: CALL G05MZF(MODE,P,NP,IP1,ITYPE,N,X,IGEN,ISEED,R,NR,IFAIL)
New: CALL G05TDF(MODE,N,P,NP,IP1,ITYPE,R,LR,STATE,X,IFAIL)

G05NAF

Withdrawn at Mark 24.
Replaced by G05NCF.
Old: CALL G05NAF(INDEX,N,IGEN,ISEED,IFAIL)
New: CALL G05NCF(INDEX,N,STATE,IFAIL)

G05NBF

Withdrawn at Mark 24.
Replaced by G05NDF.
Old: CALL G05NBF(IPOP,N,ISAMPL,M,IGEN,ISEED,IFAIL)
New: CALL G05NDF(IPOP,N,ISAMPL,M,STATE,IFAIL)

G05PAF

Withdrawn at Mark 24.
Replaced by G05PHF.
Old: CALL G05PAF(MODE,XMEAN,IP,PHI,IQ,THETA,AVAR,VAR,N,X,IGEN,ISEED,R, &
                 NR,IFAIL)
New: CALL G05PHF(MODE,N,XMEAN,IP,PHI,IQ,THETA,AVAR,R,LR,STATE,VAR,X,   &
                 IFAIL)

G05PCF

Withdrawn at Mark 24.
Replaced by G05PJF.
Old: CALL G05PCF(MODE,K,XMEAN,IP,PHI,IQ,THETA,VAR,LDV,N,X,IGEN,ISEED,R,   &
                 NR,IWORK,LIWORK,IFAIL)
New: CALL G05PJF(MODE,N,K,XMEAN,IP,PHI,IQ,THETA,VAR,LDV,R,LR,STATE,X,LDX, &
                 IFAIL)

G05QAF

Withdrawn at Mark 24.
Replaced by G05PXF.
Old: CALL G05QAF(SIDE,INIT,M,N,A,LDA,IGEN,ISEED,WK,IFAIL)
New: CALL G05PXF(SIDE,INIT,M,N,STATE,A,LDA,IFAIL)

G05QBF

Withdrawn at Mark 24.
Replaced by G05PYF.
Old: CALL G05QBF(N,D,C,LDC,EPS,IGEN,ISEED,WK,IFAIL)
New: CALL G05PYF(N,D,EPS,STATE,C,LDC,IFAIL)

G05QDF

Withdrawn at Mark 24.
Replaced by G05PZF.
Old: CALL G05QDF(MODE,NROW,NCOL,TOTR,TOTC,X,LDX,IGEN,ISEED,R,NR,IW,LIW, &
                 IFAIL)
New: CALL G05PZF(MODE,NROW,NCOL,TOTR,TOTC,R,LR,STATE,X,LDX,IFAIL)

G05RAF

Withdrawn at Mark 24.
Replaced by G05RDF.
Old: CALL G05RAF(MODE,M,C,LDC,N,X,LDX,IGEN,ISEED,R,LR,IFAIL)
New: CALL G05RDF(MODE,N,M,C,LDC,R,LR,STATE,X,LDX,IFAIL)

G05RBF

Withdrawn at Mark 24.
Replaced by G05RCF.
Old: CALL G05RBF(MODE,DF,M,C,LDC,N,X,LDX,IGEN,ISEED,R,LR,IFAIL)
New: CALL G05RCF(MODE,N,DF,M,C,LDC,R,LR,STATE,X,LDX,IFAIL)

G05YAF

Withdrawn at Mark 23.
Replaced by G05YLF and G05YMF.
Faure quasi-random numbers
Old: CALL G05YAF(.TRUE.,'F',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YLF(4,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YAF(.FALSE.,'F',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YMF(1,2,QUAS,LDQUAS,IREF,IFAIL)
Sobol quasi-random numbers
Old: CALL G05YAF(.TRUE.,'S',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YLF(2,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YAF(.FALSE.,'S',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YMF(1,2,QUAS,LDQUAS,IREF,IFAIL)
Neiderreiter quasi-random numbers
Old: CALL G05YAF(.TRUE.,'N',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YLF(3,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YAF(.FALSE.,'N',ISKIP,IDIM,QUAS,IREF,IFAIL)
New: CALL G05YMF(1,2,QUAS,LDQUAS,IREF,IFAIL)

G05YBF

Withdrawn at Mark 23.
Replaced by G05YLF and either G05YJF or G05YKF.
This routine has been replaced by a suite of routines consisting of the relevant initialization routine followed by one of two possible generator routines.
Faure quasi-random numbers with Gaussian probability:
Old: CALL G05YBF(.TRUE.,'F',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(4,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'F',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YJF(MEAN,STD,N,QUASI,IREF,IFAIL)
Sobol quasi-random numbers with Gaussian probability:
Old: CALL G05YBF(.TRUE.,'S',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(2,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'S',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YJF(MEAN,STD,N,QUASI,IREF,IFAIL)
Neiderreiter quasi-random numbers with Gaussian probability:
Old: CALL G05YBF(.TRUE.,'N',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(3,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'N',.FALSE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YJF(MEAN,STD,N,QUASI,IREF,IFAIL)
Faure quasi-random numbers with log Normal probability:
Old: CALL G05YBF(.TRUE.,'F',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(4,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'F',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YKF(MEAN,STD,N,QUASI,IREF,IFAIL)
Sobol quasi-random numbers with log Normal probability:
Old: CALL G05YBF(.TRUE.,'S',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(2,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'S',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YKF(MEAN,STD,N,QUASI,IREF,IFAIL)
Neiderreiter quasi-random numbers with log Normal probability:
Old: CALL G05YBF(.TRUE.,'N',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YLF(3,IDIM,IREF,LIREF,ISKIP,IFAIL)
Old: CALL G05YBF(.FALSE.,'N',.TRUE.,MEAN,STD,ISKIP,IDIM,QUASI,IREF,IFAIL)
New: CALL G05YKF(MEAN,STD,N,QUASI,IREF,IFAIL)

G05YCF

Withdrawn at Mark 24.
Replaced by G05YLF.
Old: CALL G05YCF(IDIM,IREF,IFAIL)
New: GENID = 4
     CALL G05YLF(GENID,IDIM,IREF,LIREF,ISKIP,IFAIL)

G05YDF

Withdrawn at Mark 24.
Replaced by G05YMF.
Old: CALL G05YDF(N,QUASI,IREF,IFAIL)
New: CALL G05YMF(N,QUAS,LDQUAS,IREF,IFAIL)

G05YEF

Withdrawn at Mark 24.
Replaced by G05YLF.
Old: CALL G05YEF(IDIM, IREF, ISKIP, IFAIL)
New: GENID = 2
     CALL G05YLF(GENID,IDIM,IREF,LIREF,ISKIP,IFAIL)

G05YFF

Withdrawn at Mark 24.
Replaced by G05YMF.
Old: CALL G05YFF(N,QUASI,IREF,IFAIL)
New: CALL G05YMF(N,QUAS,LDQUAS,IREF,IFAIL)

G05YGF

Withdrawn at Mark 24.
Replaced by G05YLF.
Old: CALL G05YGF(IDIM,IREF,ISKIP,IFAIL)
New: GENID = 3
     CALL G05YLF(GENID,IDIM,IREF,LIREF,ISKIP,IFAIL)

G05YHF

Withdrawn at Mark 24.
Replaced by G05YMF.
Old: CALL G05YHF(N,QUASI,IREF,IFAIL)
New: CALL G05YMF(N,RCORD,QUAS,LDQUAS,IREF,IFAIL)

G05ZAF

Withdrawn at Mark 22.
There is no replacement for this routine.

G13 – Time Series Analysis

G13DAF

Withdrawn at Mark 17.
Replaced by G13DMF.
Old:        CALL G13DAF(X,NXM,NX,NSM,NS,NL,ICR,C0,C,IFAIL)
New: !      First transpose the data matrix X
     !      Note NSM is used as the first dimension of the array W
            D0 20 I = 1, NS
               CALL F06EFF (DCOPY)(NX,X(1,I),1,W(I,1),NSM)
         20 CONTINUE
     !      Then if ICR = 0 in the call to G13DAF
            CALL G13DMF('V-Covariances',NS,NX,W,NSM,NL,WMEAN,C0,C,IFAIL)
     !      Else if ICR = 1 in the call to G13DAF
            CALL G13DMF('R-Correlations',NS,NX,W,NSM,NL,WMEAN,C0,C,IFAIL)
Note that in G13DAF the NS series are stored in the columns of X whereas in G13DMF these series are stored in rows; hence it is necessary to transpose the data array.
The real array WMEAN must be of length NS, and on output stores the means of each of the NS series.
The diagonal elements of C0 store the variances of the series if covariances are requested, but the standard deviations if correlations are requested.

G13DCF

Withdrawn at Mark 24.
Replaced by G13DDF.
Old: CALL G13DCF(K,N,IP,IQ,MEAN,PAR,NPAR,QQ,KMAX,W,PARHLD,EXACT,IPRINT,  &
                 CGETOL,MAXCAL,ISHOW,NITER,RLOGL,V,G,CM,LDCM,WORK,LWORK, &
                 IW,LIW,IFAIL)
New: CALL G13DDF(K,N,IP,IQ,MEAN,PAR,NPAR,QQ,KMAX,W,PARHLD,EXACT,IPRINT,  &
                 CGETOL,MAXCAL,ISHOW,NITER,RLOGL,V,G,CM,LDCM,IFAIL)
The workspace arguments WORK, LWORK, IW and LIW are no longer required in the call to G13DDF.

P01 – Error Trapping

P01ABF

Withdrawn at Mark 24.
There is no replacement for this routine.

X02 – Machine Constants

X02DAF

Withdrawn at Mark 24.
There is no replacement for this routine.

X02DJF

Withdrawn at Mark 24.
There is no replacement for this routine.

Advice on Replacement Calls for Withdrawn/Superseded Routines (PDF version)
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2012